scholarly journals Internet of Things Based on Situation-Awareness for Energy Efficiency

2019 ◽  
Vol 12 (1) ◽  
pp. 28-53 ◽  
Author(s):  
Un Hee Schiefelbein ◽  
Diovane Soligo ◽  
Vinícius Maran ◽  
José Palazzo M. De Oliveira ◽  
João Carlos Damasceno Lima ◽  
...  

The reduction of electric energy consumption is considered as one of the main challenges in diverse sectors of the economy. To residential customers, the management of energy consumption can bring significant costs reduction and decreased environmental impact. This work presents a solution based on the use of situation-awareness applied in IOT that helps the users to reduce the consumption of electric energy through its own residence. The practical results obtained in the application of this proposal in a real-live scenario confirmed the option of collecting information directly of electrical appliances and inform the user of their energy expenditures in real-time, allowing the knowledge and the management of their expenses.

2012 ◽  
Vol 157-158 ◽  
pp. 447-451
Author(s):  
Hu Hu ◽  
Xin Tian ◽  
Li Hong Han ◽  
Bin Chen

The present paper introduces a sort of analysis and design of electric energy consumption inspection equipment based on ARM9, which can inspect multiple electric energy indexes and conduct a real time inspection to electric energy consumption. Both a real time collection and a real time transmission of electric energy consumption data are realized and a real time analysis of these data that are transmitted through the network to the host computer can be carried out as well, the features of which are low power consumption, low cost, very applicable, high real time performance, etc. The paper also describes the system’s basic structure, hardware design, software design and system debugging process.


2008 ◽  
Vol 62 (4) ◽  
pp. 233-245
Author(s):  
Milorad Krgovic ◽  
Vladimir Valent ◽  
Marina Krsikapa ◽  
Miodrag Milojevic ◽  
Branko Raseta ◽  
...  

In this work, phenomena of heat and mass transfer in process of paper drying are given, certain technology units are analyzed, while possibility for decrease of specific heat and electric energy consumption by modernization of technology is examined. Some of the solutions applied on paper machines worldwide in order to improve energy efficiency are shown. Theoretic and practical discoveries in this area are applied in Board factory UMKA, and these results are shown in the work as well.


2012 ◽  
Vol 7 (3) ◽  
pp. 23-32 ◽  
Author(s):  
Miloslav Bagoňa ◽  
Dušan Katunský ◽  
Martin Lopušniak ◽  
Marián Vertaľ

2021 ◽  
Vol 13 (8) ◽  
pp. 4180
Author(s):  
Andrzej Czerepicki ◽  
Tomasz Krukowicz ◽  
Anna Górka ◽  
Jarosław Szustek

The article presents an analysis of priority solutions for trams at a selected sequence of intersections in Warsaw (Poland). An analysis of the literature has shown the topicality of this issue. A computer simulation model of a coordinated sequence of intersections was constructed. Three test scenarios were designed: the existing control system, the new coordinated fixed-time control system, and the adaptive control system with active priority. In the simulation process, detailed travel characteristics of trams and other traffic participants in a selected section were obtained for the three varying scenarios. Electric energy consumption for traction needs and pollutant emissions was then estimated for each of the variants. It was concluded that for the analyzed configuration, implementation of the adaptive priority will result in a reduction of tram time losses by up to 25%, a reduction in energy consumption by up to 23%, and a reduction in the emission of pollutants from individual vehicles by up to 3% in relation to the original variant. The conducted research may be the basis for a comprehensive method of assessing the effectiveness of applying the adaptative priority when designing new tramway lines and modernizing the existing ones.


2012 ◽  
Vol 16 (3) ◽  
pp. 131
Author(s):  
Didik Ariwibowo

Didik Ariwibowo, in this paper explain that energy audit activities conducted through several phases, namely: the initial audit, detailed audit, analysis of energy savings opportunities, and the proposed energy savings. Total energy consumed consists of electrical energy, fuel, and materials in this case is water. Electrical energy consumption data obtained from payment of electricity accounts for a year while consumption of fuel and water obtained from the payment of material procurement. From the calculation data, IKE hotels accounted for 420.867 kWh/m2.tahun, while the IKE standards for the hotel is 300 kWh/m2.tahun. Thus, IKE hotel included categorized wasteful in energy usage. The largest energy consumption on electric energy consumption. Largest electric energy consumption is on the air conditioning (AC-air conditioning) that is equal to 71.3%, and lighting and electrical equipment at 27.28%, and hot water supply system by 4.44%. Electrical energy consumption in AC looks very big. Ministry of Energy and Mineral Resources of the statutes, the profile of energy use by air conditioning at the hotel by 48.5%. With these considerations in the AC target for audit detail as the next phase of activity. The results of a detailed audit analysis to find an air conditioning system energy savings opportunities in pumping systems. Recommendations on these savings is the integration of automation on the pumping system and fan coil units (FCU). The principle of energy conservation in the pumping system is by installing variable speed drives (VSD) pump drive motor to adjust speed according to load on the FCU. Load variations FCU provide input on the VSD pumps to match. Adaptation is predicted pump can save electricity consumption up to 65.7%. Keywords: energy audit, IKE, AC


Sign in / Sign up

Export Citation Format

Share Document