Laser Illuminated Photographic Studies of the Spray and Combustion Phenomena in a Small High Speed DI Diesel Engine

1992 ◽  
Author(s):  
K. K. Rao ◽  
D. E. Winterbone ◽  
E. Clough
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Di Diesel Engine ◽  
Photographic Studies

Effects of B20 on Combustion, Emissions and Performance of a Light-Duty Diesel Engine

2009 ◽  
Author(s):  
Amy M. Peterson ◽  
Po-I Lee ◽  
Ming-Chia Lai ◽  
Ming-Cheng Wu ◽  
Craig L. DiMaggio
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Combustion Noise ◽  
Low Temperature Combustion ◽  
Performance And Emission ◽  
Ultra Low Sulfur Diesel ◽  
White Grease ◽  
Light Duty ◽  
Di Diesel Engine ◽  
And Performance

This paper compares 20% bio-diesel (B20-choice white grease) fuel with baseline ultra low sulfur diesel (ULSD) fuel on the performance of combustion and emissions of a light-duty 4-cylinder 2.8-liter common-rail DI diesel engine. The results show that operating the engine in the Low Temperature Combustion (LTC) regime produces lower PM and NOx with a slight penalty in fuel consumption, THC, and CO emissions. B20, in general, produces less soot. A slight increase in NOx emissions is shown with B20 compared to ULSD, with an exception at the high speed point where B20 has lower NOx values. In addition, the performance and emission characteristics are investigated as a function of the ECU injection strategy. The addition of pilot injections is found to effectively reduce combustion noise and extends the injection retard window to reach LTC combustion regimes with acceptable noise level for LD diesel engines.

scholarly journals Development of an optical swirl sensor for DI-diesel engines

2009 ◽  
Vol 137 (2) ◽  
pp. 37-49
Author(s):  
Robin VANHAELST ◽  
Werner HENTSCHEL ◽  
Christian MÜLLER ◽  
Jakub CZAJKA
Keyword(s):  
Diesel Engine ◽  
Optical Sensor ◽  
High Speed ◽  
Swirling Flow ◽  
Combustion Process ◽  
Optical Probe ◽  
Swirl Ratio ◽  
Acceptance Angle ◽  
Di Diesel Engine ◽  
Dimensional Simulation

In this paper the systematic development of an optical swirl sensor to measure the swirl ratio in an operating serial turbocharged DI-diesel engine is described. The optical sensor detects the visible light of the combustion, in particular the emission of the sooting flame in a wavelength range from 600 nm up to 1000 nm. The acceptance angle is so small that the soot clouds from every spray can be detected as they are being turned under the optical sensor by the swirling flow. In a first part the new optical probe method was validated on a transparent engine by comparison with high speed video recordings. In the second part several hardware variations were made on a serial DI-diesel engine which was equipped with a variable swirl valve. The influence of the opened- and closed swirl valve constellation and the piston geometry on the swirl ratio was measured with the optical probe technique. The results were compared with a zero dimensional simulation model. There was a good agreement between the swirl measurements and the 0D-model. The optical swirl sensor has proven to be a powerful tool to optimise the combustion process. Without any modifications on the cylinder head, the effect of application parameters and hardware parts on the swirl strength can be quantified for all engine loads and speeds.

scholarly journals Studies on Combustion Cycles in a Small-Sized High Speed DI Diesel Engine

1992 ◽  
Vol 27 (8) ◽  
pp. 576-586
Author(s):  
Hideo Suetsugu ◽  
Reijiro Tsuneya ◽  
Shuhei Izumi
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Di Diesel Engine

Studies on Combustion and Exhaust Emissions in a High Speed DI Diesel Engine

1990 ◽  
Author(s):  
Masahiro Ishida ◽  
Hironobu Ueki ◽  
Yoshihiro Yoshimura ◽  
Noboru Matsumura
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Exhaust Emissions ◽  
Di Diesel Engine

scholarly journals Development of an optical swirl sensor for DI-diesel engines

2010 ◽  
Vol 143 (4) ◽  
pp. 45-59
Author(s):  
Robin VANHAELST ◽  
Jakub CZAJKA
Keyword(s):  
Diesel Engine ◽  
Optical Sensor ◽  
High Speed ◽  
Swirling Flow ◽  
Combustion Process ◽  
Optical Probe ◽  
Swirl Ratio ◽  
Acceptance Angle ◽  
Di Diesel Engine ◽  
Dimensional Simulation

In this paper the systematic development of an optical swirl sensor to measure the swirl ratio in an operating serial turbocharged DI-diesel engine is described. The optical sensor detects the visible light of the combustion, in particular the emission of the sooting flame in a wavelength range from 600 nm up to 1000 nm. The acceptance angle is so small that the soot clouds from every spray can be detected as they are beeing turned under the optical sensor by the swirling flow. In a first part the new optical probe method was validated on a transparent engine by comparison with high speed video recordings. In the second part several hardware variations were made on a serial DI-diesel engine which was equipped with a variable swirl valve. The influence of the opened- and closed swirl valve constellation, the piston geometry and the injector influence on the swirl ratio was measured with the optical probe technique. The results were compared with a zero dimensional simulation model. There was a good agreement between the swirl measurements and the 0D-model. The optical swirl sensor has proven to be a powerful tool to optimise the combustion process. Without any modifications on the cylinder head, the effect of application parameters and hardware parts on the swirl strength can be quantified for all engine loads and speeds.

Sign in / Sign up

Export Citation Format

Share Document