A New High Speed Light Duty DI Diesel Engine

1988 ◽  
Author(s):  
Otto Freudenschuss
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Light Duty ◽  
Di Diesel Engine

Effects of B20 on Combustion, Emissions and Performance of a Light-Duty Diesel Engine

2009 ◽  
Author(s):  
Amy M. Peterson ◽  
Po-I Lee ◽  
Ming-Chia Lai ◽  
Ming-Cheng Wu ◽  
Craig L. DiMaggio
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Combustion Noise ◽  
Low Temperature Combustion ◽  
Performance And Emission ◽  
Ultra Low Sulfur Diesel ◽  
White Grease ◽  
Light Duty ◽  
Di Diesel Engine ◽  
And Performance

This paper compares 20% bio-diesel (B20-choice white grease) fuel with baseline ultra low sulfur diesel (ULSD) fuel on the performance of combustion and emissions of a light-duty 4-cylinder 2.8-liter common-rail DI diesel engine. The results show that operating the engine in the Low Temperature Combustion (LTC) regime produces lower PM and NOx with a slight penalty in fuel consumption, THC, and CO emissions. B20, in general, produces less soot. A slight increase in NOx emissions is shown with B20 compared to ULSD, with an exception at the high speed point where B20 has lower NOx values. In addition, the performance and emission characteristics are investigated as a function of the ECU injection strategy. The addition of pilot injections is found to effectively reduce combustion noise and extends the injection retard window to reach LTC combustion regimes with acceptable noise level for LD diesel engines.

Utilization of waste cooking oil in a light-duty DI diesel engine for cleaner emissions using bio-derived propanol

Fuel ◽  
2019 ◽  
Vol 235 ◽  
pp. 832-837 ◽  
Author(s):  
R. Dhanasekaran ◽  
S. Ganesan ◽  
B. Rajesh Kumar ◽  
S. Saravanan
Keyword(s):  
Diesel Engine ◽  
Waste Cooking Oil ◽  
Cooking Oil ◽  
Light Duty ◽  
Di Diesel Engine

Cycle-to-Cycle NO and NOx Emissions From a HSDI Diesel Engine

2018 ◽  
Author(s):  
Felix Leach ◽  
Martin Davy ◽  
Mark Peckham
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Nox Emissions ◽  
Nox Formation ◽  
Reduction Techniques ◽  
Light Duty ◽  
Peak Cylinder Pressure ◽  
Crank Angle ◽  
The Difference ◽  
Hsdi Diesel Engine

Engine-out NOx emissions from diesel engines continue to be a major topic of research interest. While substantial understanding has been obtained of engine-out (i.e. before any aftertreatment) NOx formation and reduction techniques, not least EGR which is now well established and fitted to production vehicles, much less data are available on cycle resolved NOx emissions. In this work, crank-angle resolved NO and NOx measurements have been taken from a high-speed light duty diesel engine at test conditions both with and without EGR. These have been combined with 1D data of exhaust flow and this used to form a mass average of NO and NOx emissions per cycle. These results have been compared with combustion data and other emissions. The results show that there is a very strong correlation (R2 > 0.95) between the NOx emitted per cycle and the peak cylinder pressure of that cycle. In addition, the crank-angle resolved NO and NOx measurements also reveal that there is a difference in NO : NO2 ratio (where NO2 is assumed to be the difference between NO and NOx) during the exhaust period, with proportionally more NO2 being emitted during the blowdown period compared to the rest of the exhaust stroke.

Sign in / Sign up

Export Citation Format

Share Document