Correlation of Truck Tire Rolling Resistance as Derived From Fuel Economy and Laboratory Tests

1982 ◽  
Author(s):  
R. E. Knight
Keyword(s):  
Fuel Economy ◽  
Laboratory Tests ◽  
Rolling Resistance ◽  
Truck Tire

Evolving the Banded Radial Tire

1987 ◽  
Vol 15 (1) ◽  
pp. 30-41 ◽  
Author(s):  
E. G. Markow
Keyword(s):  
Finite Element ◽  
Wear Rate ◽  
Finite Element Modeling ◽  
Laboratory Tests ◽  
Rolling Resistance ◽  
Two Dimensional ◽  
Theoretical Discussion ◽  
Radial Tire ◽  
Puncture Resistance ◽  
Element Modeling

Abstract Development of the banded radial tire is discussed. A major contribution of this tire design is a reliable run-flat capability over distances exceeding 160 km (100 mi). Experimental tire designs and materials are considered; a brief theoretical discussion of the mechanics of operation is given based on initial two-dimensional studies and later on more complete finite element modeling. Results of laboratory tests for cornering, rolling resistance, and braking are presented. Low rolling resistance, good cornering and braking properties, and low tread wear rate along with good puncture resistance are among the advantages of the banded radial tire designs.

Commercial Trailer Tires: Tire Inflation and Its Effect on Rolling Resistance, Fuel Economy, and Tire Footprint

2015 ◽  
Vol 43 (2) ◽  
pp. 144-162
Author(s):  
Al Cohn
Keyword(s):  
Fuel Economy ◽  
Rolling Resistance ◽  
Maintenance Cost ◽  
Wear Loss ◽  
Truck Tires ◽  
Footprint Analysis ◽  
Subsequent Loss ◽  
Resistance Data

ABSTRACT Maintaining proper tire inflation is the number one issue facing commercial fleets today. Common, slow-leaking tread area punctures along with leaking valve stems and osmosis through the tire casing lead to tire underinflation with a subsequent loss in fuel economy, reduction in retreadability, tread wear loss, irregular wear, and increase in tire-related roadside service calls. Commercial truck tires are the highest maintenance cost for fleets second only to fuel. This article will examine tire footprint analysis, rolling resistance data, and the effect on vehicle fuel economy from tires run at a variety of underinflated, overinflated, and recommended tire pressures. This analysis will also include the tire footprint impact by running tires on both fully loaded and unloaded trailers. The footprint analysis addresses both standard dual tires (295/75R22.5) along with the newer increasingly popular wide-base tire size 445/50R22.5.

Thermomechanical Coupling of a Hyper-viscoelastic Truck Tire and a Pavement Layer and its Impact on Three-dimensional Contact Stresses

2021 ◽  
pp. 036119812110171
Author(s):  
Angeli Jayme ◽  
Imad L. Al-Qadi
Keyword(s):  
Contact Stress ◽  
Contact Area ◽  
Three Dimensional ◽  
Interaction Model ◽  
Rolling Resistance ◽  
Contact Stresses ◽  
Thermomechanical Coupling ◽  
Temperature Profiles ◽  
Near Surface ◽  
Truck Tire

A thermomechanical coupling between a hyper-viscoelastic tire and a representative pavement layer was conducted to assess the effect of various temperature profiles on the mechanical behavior of a rolling truck tire. The two deformable bodies, namely the tire and pavement layer, were subjected to steady-state-uniform and non-uniform temperature profiles to identify the significance of considering temperature as a variable in contact-stress prediction. A myriad of ambient, internal air, and pavement-surface conditions were simulated, along with combinations of applied tire load, tire-inflation pressure, and traveling speed. Analogous to winter, the low temperature profiles induced a smaller tire-pavement contact area that resulted in stress localization. On the other hand, under high temperature conditions during the summer, higher tire deformation resulted in lower contact-stress magnitudes owing to an increase in the tire-pavement contact area. In both conditions, vertical and longitudinal contact stresses are impacted, while transverse contact stresses are relatively less affected. This behavior, however, may change under a non-free-rolling condition, such as braking, accelerating, and cornering. By incorporating temperature into the tire-pavement interaction model, changes in the magnitude and distribution of the three-dimensional contact stresses were manifested. This would have a direct implication on the rolling resistance and near-surface behavior of flexible pavements.

The Study of Fuel-Saving Technology of GSI

2014 ◽  
Vol 1070-1072 ◽  
pp. 392-397
Author(s):  
Jun Hui Xu ◽  
Ming Qiu Gao ◽  
Ji Qiang Gao ◽  
Xiang Bao
Keyword(s):  
Fuel Consumption ◽  
Fuel Economy ◽  
Rolling Resistance ◽  
Fuel Saving ◽  
Pressure Monitoring ◽  
Tire Pressure ◽  
Engine Efficiency ◽  
Tire Pressure Monitoring System ◽  
The Eu

In the background of the main technologies of fuel economy in automobiles developed to a certain stage, it is necessary to reduce fuel consumption and increase the engine efficiency by developing other auxiliary technologies such as improving the ratio of pure energy drive, low rolling resistance tires, tire pressure monitoring system and gear shift indicators (GSI). This article introduces the principle of GSI, analyses how GSI works in improving engine efficiency, and then evaluates the method for determination of the relative saving rate of fuel consumption, which method was introduced in the EU regulation EC No. 65/2012.

A Study on the Influences of Crumb Rubber Modified Asphalt

2012 ◽  
Vol 204-208 ◽  
pp. 3899-3904
Author(s):  
Lan Yun Chen ◽  
Qing Long You ◽  
Xin Qiu
Keyword(s):  
Laboratory Tests ◽  
Mechanical Characteristics ◽  
Engineering Application ◽  
Crumb Rubber ◽  
Climatic Conditions ◽  
Pavement Performance ◽  
Rubber Content ◽  
Modified Asphalt ◽  
Truck Tire

In order to study the effects of different factors on the performance of crumb rubber modified asphalt, on the basis of many laboratory tests, this article analyzed such factors as types of crumb rubber, fineness, content, mixing temperature and matrix asphalt. Results show that mixed with the crumb rubber, pavement performance of the asphalt has been improved to varying degree. In the engineering application of rubber asphalt, it is suggested that the 20 mesh crumb rubber modified asphalt of truck tire be adopted, with about 16% to 18% of crumb rubber content at about 175°C. As for matrix asphalt, it should be selected according to the different climatic conditions and the mechanical characteristics of the pavement.

FEA Tire Modeling and Validation Techniques

2015 ◽  
Author(s):  
Mehrsa Marjani ◽  
Moustafa El-Gindy ◽  
David Philipps ◽  
Fredrik Öijer ◽  
Inge Johansson
Keyword(s):  
Experimental Data ◽  
Dynamic Characteristics ◽  
Rolling Resistance ◽  
Vertical Acceleration ◽  
Virtual Model ◽  
Static And Dynamic Characteristics ◽  
Modeling Methods ◽  
Truck Tire ◽  
Tire Modeling ◽  
Tire Models

Recent advances in power and efficiency of computerized modeling methods has made it easier to develop accurate tire models. These newer models are now created with such accuracy that it has become easy to predict the experimental tire’s behavior and characteristics. These models are helpful with determining tire, tire-road, and tire-soil interaction properties. By creating virtual models, the overall capital for research and development can be reduced as well as replacing unavailable experimental tires for research. This research paper mainly focuses on the validation of computer generated FEA tire models which are then used for the prediction of the experimental tire’s rolling resistance, static and dynamic characteristics. Experimental data, such as rolling resistance and vertical acceleration are used in validation simulations in order to tune the virtual model to match the experimental tire’s behavior. The tire that was used for this research is a six-groove 445/50R22.5 FEA truck tire, which was constructed and validated over the course of this research.

BETTER BALANCE OF SILICA-REINFORCED NATURAL RUBBER TIRE TREAD COMPOUND PROPERTIES BY THE USE OF MONTMORILLONITE WITH OPTIMUM SURFACE MODIFIER CONTENT

2020 ◽  
pp. 000-000 ◽  
Author(s):  
Mohammad Irfan Fathurrohman ◽  
Supagorn Rugmai ◽  
Nabil Hayeemasae ◽  
Kannika Sahakaro
Keyword(s):  
Natural Rubber ◽  
Abrasion Resistance ◽  
Dynamic Properties ◽  
Rolling Resistance ◽  
Complex Viscosity ◽  
Dynamic Mechanical Properties ◽  
Rubber Matrix ◽  
Dispersing Agent ◽  
Truck Tire ◽  
Key Factor

ABSTRACT Reinforcement of silica in tire tread compounds is known to reduce hysteresis or energy loss, which leads to a production of energy-saving tires. Even though silica–silane technology has been well established, further development to enhance its performance is still needed. One of the approaches is to use hybrid or dual filler. The use of silica-organomodified montmorillonite (MMT) dual filler in the reinforcement of natural rubber (NR) truck tire tread compounds is investigated. The NR-MMT master batches were prepared by using the in situ organomodified and latex compounding method. Because the surface-modifying agent or surfactant is a key factor in determining the level of MMT dispersion in the rubber matrix, the effect of quaternary amine salt (Q) contents on mechanical and dynamic properties of NR tread compounds reinforced by silica-MMT was studied. The results revealed that MMT and Q can effectively reduce the filler–filler interaction and complex viscosity owing to a good dispersion of MMT and silica in the NR matrix and Q, which acts as a dispersing agent in addition to the silane coupling agent used in the compound, leading to improvement in tensile, abrasion resistance, and dynamic mechanical properties with an increasing amount of Q. Furthermore, at the optimum content of the surfactant used (36 wt%), the silica-MMT–reinforced NR exhibited improved tensile strength (+4%), wet grip, and rolling resistance, respectively, as indicated by loss tangent at 0 °C (+6%) and 60 °C (−15%), while maintaining a modulus at 300% strain and abrasion resistance as compared with the silica-NR reference compound. Such a dual-filler system demonstrates its potential use for tire treads with better performance.

Sign in / Sign up

Export Citation Format

Share Document