Relationship Between Oil Film Thickness and Wear of Journal Bearings

1970 ◽  
Author(s):  
Andreas Gervé ◽  
Gustav Katzenmeier ◽  
Karl Kollmann
Keyword(s):  
Film Thickness ◽  
Journal Bearings ◽  
Oil Film

Report Paper 2: Approximate Short Bearing Analysis and Experimental Results Obtained Using Plastic Bearing Liners

1969 ◽  
Vol 184 (12) ◽  
pp. 190-196 ◽  
Author(s):  
J. P. O'Donoghue ◽  
P. R. Koch ◽  
C. J. Hooke
Keyword(s):  
Approximate Solution ◽  
Film Thickness ◽  
Journal Bearings ◽  
Experimental Results ◽  
Approximate Theory ◽  
Hydrodynamic Problem ◽  
Dynamic Conditions ◽  
Oil Film ◽  
Theoretical Predictions ◽  
Bearing Analysis

This paper outlines a new approximate theory for liquid lubricated plain journal bearings with elastic liners. This is a modified form of Ocvirk's theory and includes the effect of circumferential flow. The results of a series of tests on short plastic bearings are presented to compare with the theoretical predictions of the new theory. The authors conclude that for short bearings the theory gives reasonably good predictions of performance, but the elasticity assumptions cause major errors for length/diameter ratios greater than 0·5 due to the decrease in oil film thickness that occurs near the ends of the bearing. The approximate solution adopted for the hydrodynamic problem may be of use for considering dynamic conditions taking the Reynolds conditions for cavitation.

Effect of Scratches on a Tilting-Pad Journal Bearing

2020 ◽  
Author(s):  
Steven Chatterton ◽  
Paolo Pennacchi ◽  
Andrea Vania ◽  
Mohamed Amine Hassini ◽  
Antoine Kuczkowiak
Keyword(s):  
Film Thickness ◽  
Dynamic Performance ◽  
Journal Bearings ◽  
Hydrodynamic Performance ◽  
Axial Position ◽  
Steam Turbines ◽  
Local Pressure ◽  
Oil Film ◽  
Tilting Pad ◽  
Tilting Pad Journal Bearing

Abstract Many industrial rotating machines are equipped with hydrodynamic journal bearings, such as centrifugal compressors, steam turbines, pumps and motors. After some time from the installation, however, the surface of the bearings often presents imperfections and slight damages mainly caused by the presence of harder particles in the lubricant during start-ups and shut-downs, when the hydrodynamic mechanism is not well developed and the mixed lubrication can occur. The presence of scratches on a bearing can lead to variations of the oil film thickness which, in turn, causes significant degradation of the bearing hydrodynamic performance. For example, the reduction of the minimum oil-film thickness can lead to the increase in the local temperature, to local pressure peaks and, finally, to the failure of the bearing. Experimental data relating to scratches on journal bearings are extremely limited in the literature especially for tilting-pad journal bearings (TPJBs). An experimental activity was carried out to study the effect of artificial scratches on pads on the static and dynamic behaviors of a TPJB. The number of scratches, the depth and the axial position have been investigated and the dynamic coefficients have been estimated as well. The experimental results confirmed a degradation of the dynamic performance of the bearing in case of scratches, that it has has been also confirmed by means of numerical simulations.

Research on the Static and Dynamic Characteristics of Misaligned Journal Bearing Considering the Turbulent and Thermohydrodynamic Effects

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Guohui Xu ◽  
Jian Zhou ◽  
Haipeng Geng ◽  
Mingjian Lu ◽  
Lihua Yang ◽  
...  
Keyword(s):  
Film Thickness ◽  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Static And Dynamic Characteristics ◽  
Oil Film ◽  
Stiffness And Damping ◽  
Film Stiffness ◽  
Journal Misalignment ◽  
Oil Film Pressure

Journal misalignment usually exists in journal bearings that affect nearly all the bearings static and dynamic characteristics including minimum oil film thickness, maximum oil film pressure, maximum oil film temperature, oil film stiffness, and damping. The main point in this study is to provide a comprehensive analysis on the oil film pressure, oil film temperature, oil film thickness, load-carrying capacity, oil film stiffness, and damping of journal bearing with different misalignment ratios and appropriately considering the turbulent and thermo effects based on solving the generalized Reynolds equation and energy equation. The results indicate that the oil thermo effects have a significant effect on the lubrication of misaligned journal bearings under large eccentricity ratio. The turbulent will obviously affect the lubrication of misaligned journal bearings when the eccentricity or misalignment ratio is large. In the present design of the journal bearing, the load and speed become higher and higher, and the eccentricity and misalignment ratio are usually large in the operating conditions. Therefore, it is necessary to take the effects of journal misalignment, turbulent, and thermal effect into account in the design and analysis of journal bearings.

A Correlation Between Engine Oil Rheology and Oil Film Thickness in Engine Journal Bearings

1986 ◽  
Author(s):  
Terence W. Bates ◽  
Brian Williamson ◽  
James A. Spearot ◽  
Chester K. Murphy
Keyword(s):  
Film Thickness ◽  
Journal Bearings ◽  
Engine Oil ◽  
Oil Film

Surface Finish and Clearance Effects on Journal-Bearing Load Capacity and Friction

1959 ◽  
Vol 81 (2) ◽  
pp. 245-252 ◽  
Author(s):  
F. W. Ocvirk ◽  
G. B. DuBois
Keyword(s):  
Experimental Data ◽  
Film Thickness ◽  
Surface Finish ◽  
Journal Bearing ◽  
Load Capacity ◽  
Journal Bearings ◽  
Oil Film ◽  
Bearing Clearance ◽  
Bearing Load

A method of relating surface finish to minimum oil-film thickness and the corresponding load capacity of plain journal bearings is presented with supporting experimental data. The effect of clearance on load capacity and friction are shown on graphs indicating an optimum bearing clearance.

Sign in / Sign up

Export Citation Format

Share Document