This paper describes the ac-rectified dc propulsion system designed for the two ferry vessels, MV Spokane and MV Walla Walla, and reports the results of an analog study conducted as a design tool. Similar data are presented showing the results obtained by recording electrical system performance during builder's trials.
Typical application of bidirectional DC/DC power converter exists in hybrid cars. Recently, a similar approach has been applied in hybrid propelled ships as well. In this paper, a novel low power bidirectional DC/DC power converter of standard Buck/Boost topology has ben designed in order to explore possibilities of the high power design in maritime applications. In order to discover critical points of a design, thermal imaging has been investigated. The results clearly indicate that the proposed solution is more cost effective than a typical standard bidirectional DC/DC power converter. Likewise, the improvement in maneuvering of the propelled vessel system with two and more electric drives has been investigated and compared to a classical diesel, single engine propulsion system.
Europe has a long history of high speed locomotive and power unit development. This paper focuses on these developments in Sweden, Germany, Switzerland and Spain starting from high speed locomotives for 125 mph and ending with the AVE S112 high speed power unit for 206 mph. The major technical objectives starting in the 1970’s were to increase the speed and performance, while reducing the axle load from typically 21t at 125 mph to 17t at ≥ 156 mph. Developments of the propulsion system and vehicle concepts took place in many incremental steps, constantly improving the performance of high speed services. It is shown how American high speed locomotives relate to these developments and how one can learn from the European experience going forward.
A large number of operation data will be generated in the process of ship propulsion system operation. Aiming at the processing, analysis and application of these operation data, a data warehouse for propulsion system is constructed based on the operation data of a ship, and the multidimensional analysis and result display of data are realized by combining OLAP technology with visual analysis software tableau. On the basis of the data warehouse, the soft sensing of parameters is applied to the data warehouse. Based on the soft sensing data, the hydrodynamic characteristics of the propeller are studied, and the hydrodynamic characteristic curves of the propeller are obtained. The research of ship propulsion system based on data warehouse provides support for the comprehensive information of propulsion system data.
NEXT Ion Propulsion System Configurations and Performance for Saturn System Exploration