Realisation of Large Cavities in Multilayer Ceramics by Cold Low Pressure Lamination and Their Characterisation by μCT

2012 ◽  
Vol 2012 (CICMT) ◽  
pp. 000263-000268 ◽  
Author(s):  
Ulrike Deisinger ◽  
Tobias Fey ◽  
Andreas Roosen
Keyword(s):  
High Frequency ◽  
Room Temperature ◽  
Low Pressure ◽  
Multilayer Structures ◽  
Adhesive Tape ◽  
Microelectronic Devices ◽  
Micro Fluidics ◽  
Internal Cavities ◽  
Micro Reactors

In microelectronics the ceramic multilayer technology is frequently used as it allows a precise and yet flexible production of MEMS, microelectronic devices, micro reactors or devices for micro fluidics. During production of those multilayer structures the single layers are typically laminated by thermo-compression. However, large cavities cannot be realised using thermo-compression without adding sacrificial fillings. In contrast, the cold low pressure lamination (CLPL) technique allows lamination at room temperature without applying a high pressure. As in this lamination technique no mass flow occurs, internal cavities are not destroyed during the lamination step. In this study, commercially available LTCC green tapes were structured using a milling plotter with a high frequency spindle. Different process parameters (milling speed, spindle frequency) were evaluated regarding the accuracy of shape and quality of the channel edge. Channels with various dimensions (2.5 - 15 mm width and 30 mm length) were milled into the green tapes. Subsequently, the green tapes were laminated using the CLPL technique. With CLPL adjacent ceramic green tapes are joined by a double sided adhesive tape, which is applied by a soft roller. By alternately applying green (structured or unstructured) and adhesive tapes multilayer structures with internal cavities are formed. For characterisation of the sintered LTCC structures μCT (computed tomography) was used to analyse the internal structure without destroying the sample. Influence of sintering regime on deformation was evaluated. It was shown that milling of green tapes in combination with CLPL is a suitable method to fabricate internal cavities in LTCC multilayer structures.

Growth of Epitaxial CoSi2/Si Multilayers

1986 ◽  
Vol 77 ◽  
Author(s):  
B. D. Runt ◽  
N. Lewis ◽  
L. J. Schotalter ◽  
E. L. Hall ◽  
L. G. Turner
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Solid Phase ◽  
Multilayer Structures ◽  
Solid Phase Epitaxy ◽  
Cross Sectional ◽  
Temperature Growth ◽  
Transmission Electron

ABSTRACTEpitaxial CoSi2/Si multilayers have been grown on Si(111) substrates with up to four bilayers of suicide and Si. To our knowledge, these are the first reported epitaxial metal-semiconductor multilayer structures. The growth of these heterostructures is complicated by pinhole formation in the suicide layers and by nonuniform growth of Si over the suicide films, but these problems can be controlled through nse of proper growth techniques. CoSi2 pinhole formation has been significantly reduced by utilizing a novel solid phase epitaxy technique in which room-temperature-deposited Co/Si bilayers are annealed to 600–650δC to form the suicide layers. Islanding in the Si layers is minimized by depositing a thin (<100Å) Si layer at room temperature with subsequent high temperature growth of the remainder of the Si. Cross-sectional transmission electron microscopy studies demonstrate that these growth procedures dramatically improve the continuity and quality of the CoSi. and Si multilayers.

Investigation of ultra-thin films of YBa2Cu3O7−δ grown on MgO

1990 ◽  
Vol 48 (4) ◽  
pp. 6-7
Author(s):  
S.K. Streiffer ◽  
C.B. Eom ◽  
J.C. Bravman ◽  
T.H. Geballet
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Deposition Process ◽  
Nucleation And Growth ◽  
Multilayer Structures ◽  
Rf Power ◽  
Oxygen Loss ◽  
Transmission Electron ◽  
Single Target ◽  
Mtorr Argon

The study of very thin (<15 nm) YBa2Cu3O7−δ (YBCO) films is necessary both for investigating the nucleation and growth of films of this material and for achieving a better understanding of multilayer structures incorporating such thin YBCO regions. We have used transmission electron microscopy to examine ultra-thin films grown on MgO substrates by single-target, off-axis magnetron sputtering; details of the deposition process have been reported elsewhere. Briefly, polished MgO substrates were attached to a block placed at 90° to the sputtering target and heated to 650 °C. The sputtering was performed in 10 mtorr oxygen and 40 mtorr argon with an rf power of 125 watts. After deposition, the chamber was vented to 500 torr oxygen and allowed to cool to room temperature. Because of YBCO’s susceptibility to environmental degradation and oxygen loss, the technique of Xi, et al. was followed and a protective overlayer of amorphous YBCO was deposited on the just-grown films.

Simulation of vibration piercing of pipe blank at press

2020 ◽  
Vol 76 (11) ◽  
pp. 1128-1138
Author(s):  
S. R. Rakhmanov
Keyword(s):  
High Frequency ◽  
Deformation Zone ◽  
Pipe Blank ◽  
Equipment Operation ◽  
Metal Deformation ◽  
Technological Tool ◽  
High Frequency Vibrations ◽  
Pipe Blanks ◽  
Wave Phenomena

In some cases, the processes of piercing or expanding pipe blanks involve the use of high-frequency active vibrations. However, due to insufficient knowledge, these processes are not widely used in the practice of seamless pipes production. In particular, the problems of increasing the efficiency of the processes of piercing or expanding a pipe blank at a piercing press using high-frequency vibrations are being solved without proper research and, as a rule, by experiments. The elaboration of modern technological processes for the production of seamless pipes using high-frequency vibrations is directly related to the choice of rational modes of metal deformation and the prediction resistance indicators of technological tools and the reliability of equipment operation. The creation of a mathematical model of the process of vibrating piercing (expansion) of an axisymmetric pipe blank at a piercing press of a pipe press facility is an actual task. A calculation scheme for the process of piercing a pipe plank has been elaborated. A dependence was obtained characterizing the speed of front of plastic deformation propagation on the speed of penetration of a vibrated axisymmetric mandrel into the pipe workpiece being pierced. The dynamic characteristics of the occurrence of wave phenomena in the metal being pierced under the influence of a vibrated tool have been determined, which significantly complements the previously known ideas about the stress-strain state of the metal in the deformation zone. The deformation fields in the zones of the disturbed region of the deformation zone were established, taking into account the high-frequency vibrations of the technological tool. It has been established that the choice of rational parameters (amplitude-frequency characteristics) of the vibration piercing process of a pipe blank results in significant increase in the efficiency of the process, the durability of the technological tool and the quality of the pierced blanks.

Dynamics of the processes in metal machining

1998 ◽  
Vol 2 ◽  
pp. 115-122
Author(s):  
Donatas Švitra ◽  
Jolanta Janutėnienė
Keyword(s):  
High Frequency ◽  
Machine Tools ◽  
Metal Cutting ◽  
Cutting Tool ◽  
Low Frequency ◽  
Metal Cutting Machine ◽  
Cutting Machine ◽  
Metal Machining

In the practice of processing of metals by cutting it is necessary to overcome the vibration of the cutting tool, the processed detail and units of the machine tool. These vibrations in many cases are an obstacle to increase the productivity and quality of treatment of details on metal-cutting machine tools. Vibration at cutting of metals is a very diverse phenomenon due to both it’s nature and the form of oscillatory motion. The most general classification of vibrations at cutting is a division them into forced vibration and autovibrations. The most difficult to remove and poorly investigated are the autovibrations, i.e. vibrations arising at the absence of external periodic forces. The autovibrations, stipulated by the process of cutting on metalcutting machine are of two types: the low-frequency autovibrations and high-frequency autovibrations. When the low-frequency autovibration there appear, the cutting process ought to be terminated and the cause of the vibrations eliminated. Otherwise, there is a danger of a break of both machine and tool. In the case of high-frequency vibration the machine operates apparently quiently, but the processed surface feature small-sized roughness. The frequency of autovibrations can reach 5000 Hz and more.

THE STUDY ON TA VAT WINE PRODUCTION FROM SUGAR PALM (ARENGA PINNATA) SAP

2014 ◽  
Vol 83 (5) ◽  
Author(s):  
Nguyễn Thị Hồng Thu ◽  
Đặng Minh Nhật ◽  
Nguyễn Hoàng Dung
Keyword(s):  
Room Temperature ◽  
Fermentation Process ◽  
Inoculum Size ◽  
Wine Fermentation ◽  
Wine Production ◽  
Factors Affecting ◽  
Natural Fermentation ◽  
Tropical Asia ◽  
Best Parameters

Sugar palm (Arenga pinnata) is a feather palm native to tropical Asia. In Vietnam, it is named Búng Báng or Đoác and grown only on the highlands in the central or northern part of Vietnam. It is utilized for many purposes, especially for Ta Vat wine production - a characteristic and unique product of Co Tu ethnic minority. However, because of the natural fermentation used in the production, the product quality is inconsistent. The purpose of this study was to examine a new procedure of using palm sap for making Ta Vat wine. Some characteristics of the sap, which was collected at Nam Giang district, Quang Nam province are determined, proving the potential of the sap for making wine product. The quality of sap changes quickly at room temperature. At low temperature (4 - 60C), the changes in sap quality are apparently slower. Examining some factors affecting its quality during the wine fermentation process, we determined the best parameters for the fermentation process as follows: inoculum size of 3% with cell density of about 1x108 cells/ml, the addition of the extract from the bark of Ceylon ironwood (Mesua ferrea L.) 4%. Keywords: Arenga pinnata, sap, Ceylon ironwood bark, Mesua ferrea L., wine fermentation.

Systematic literature review of clinical outcomes in adults with metastatic or advanced synovial sarcoma

2020 ◽  
Vol 16 (35) ◽  
pp. 2997-3013
Author(s):  
Kentaro Kogushi ◽  
Michael LoPresti ◽  
Shunya Ikeda
Keyword(s):  
Synovial Sarcoma ◽  
High Frequency ◽  
Clinical Evidence ◽  
Systemic Treatment ◽  
Progression Free Survival ◽  
Treatment Modalities ◽  
Free Survival ◽  
New Treatment ◽  
Poor Outcomes

Background: Synovial sarcoma (SS) is a rare, aggressive soft tissue sarcoma with a poor prognosis after metastasis. The objective of this study was to conduct a systematic review of the clinical evidence for therapeutic options for adults with metastatic or advanced SS. Materials & methods: Relevant databases were searched with predefined keywords. Results: Thirty-nine publications reported clinical data for systemic treatment and other interventions. Data on survival outcomes varied but were generally poor (progression-free survival: 1.0–7.7 months; overall survival: 6.7–29.2 months) for adults with metastatic and advanced SS. A high frequency of neutropenia with systemic treatment and low quality of life post-progression were reported. Conclusion: Reported evidence suggests poor outcomes in adults with metastatic and advanced SS and the need for the development of new treatment modalities.

scholarly journals High-Pressure Spectroscopy Study of Zn(IO3)2 Using Far-Infrared Synchrotron Radiation

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 34
Author(s):  
Akun Liang ◽  
Robin Turnbull ◽  
Enrico Bandiello ◽  
Ibraheem Yousef ◽  
Catalin Popescu ◽  
...  
Keyword(s):  
High Pressure ◽  
Phase Transitions ◽  
Synchrotron Radiation ◽  
Infrared Radiation ◽  
Room Temperature ◽  
Far Infrared ◽  
Low Pressure ◽  
Pressure Response ◽  
Spectroscopy Study ◽  
Far Infrared Radiation

We report the first high-pressure spectroscopy study on Zn(IO3)2 using synchrotron far-infrared radiation. Spectroscopy was conducted up to pressures of 17 GPa at room temperature. Twenty-five phonons were identified below 600 cm−1 for the initial monoclinic low-pressure polymorph of Zn(IO3)2. The pressure response of the modes with wavenumbers above 150 cm−1 has been characterized, with modes exhibiting non-linear responses and frequency discontinuities that have been proposed to be related to the existence of phase transitions. Analysis of the high-pressure spectra acquired on compression indicates that Zn(IO3)2 undergoes subtle phase transitions around 3 and 8 GPa, followed by a more drastic transition around 13 GPa.

scholarly journals Force detection of high-frequency electron spin resonance near room temperature using high-power millimeter-wave source gyrotron

2021 ◽  
Vol 118 (2) ◽  
pp. 022407
Author(s):  
Hideyuki Takahashi ◽  
Yuya Ishikawa ◽  
Tsubasa Okamoto ◽  
Daiki Hachiya ◽  
Kazuki Dono ◽  
...  
Keyword(s):  
Electron Spin Resonance ◽  
Millimeter Wave ◽  
Electron Spin ◽  
High Power ◽  
High Frequency ◽  
Room Temperature ◽  
Force Detection ◽  
Wave Source ◽  
Spin Resonance ◽  
Millimeter Wave Source

scholarly journals How Good Is the STW Sensor? An Account from a Larger Shipping Company

2021 ◽  
Vol 9 (5) ◽  
pp. 465
Author(s):  
Angelos Ikonomakis ◽  
Ulrik Dam Nielsen ◽  
Klaus Kähler Holst ◽  
Jesper Dietz ◽  
Roberto Galeazzi
Keyword(s):  
High Frequency ◽  
Additional Data ◽  
Empirical Method ◽  
Influential Factor ◽  
Sensor Data ◽  
Sea State ◽  
Shipping Company ◽  
Frequency Sensor ◽  
Semi Empirical

This paper examines the statistical properties and the quality of the speed through water (STW) measurement based on data extracted from almost 200 container ships of Maersk Line’s fleet for 3 years of operation. The analysis uses high-frequency sensor data along with additional data sources derived from external providers. The interest of the study has its background in the accuracy of STW measurement as the most important parameter in the assessment of a ship’s performance analysis. The paper contains a thorough analysis of the measurements assumed to be related with the STW error, along with a descriptive decomposition of the main variables by sea region including sea state, vessel class, vessel IMO number and manufacturer of the speed-log installed in each ship. The paper suggests a semi-empirical method using a threshold to identify potential error in a ship’s STW measurement. The study revealed that the sea region is the most influential factor for the STW accuracy and that 26% of the ships of the dataset’s fleet warrant further investigation.

Sign in / Sign up

Export Citation Format

Share Document