scholarly journals The Effect of Adding Hydroxyapatite on the Flexural Strength of Glass Ionomer Cement

2003 ◽  
Vol 22 (2) ◽  
pp. 126-136 ◽  
Author(s):  
Kenji ARITA ◽  
Milanita E. LUCAS ◽  
Mizuho NISHINO
Keyword(s):  
Flexural Strength ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Ionomer Cement

scholarly journals Effects of Powdery Cellulose Nanofiber Addition on the Properties of Glass Ionomer Cement

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3077 ◽  
Author(s):  
Takako Nishimura ◽  
Yukari Shinonaga ◽  
Chikoto Nagaishi ◽  
Rie Imataki ◽  
Michiko Takemura ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Cellulose Nanofibers ◽  
Glass Ionomer Cement ◽  
Chemical Properties ◽  
Fluoride Ion ◽  
Strength Testing ◽  
Glass Ionomer ◽  
Ion Release ◽  
Diametral Tensile Strength ◽  
Ionomer Cement

In this study, we aimed to evaluate the effect of the addition of powdery cellulose nanofibers (CNFs) on the mechanical properties of glass ionomer cement (GIC) without negatively affecting its chemical properties. Commercial GIC was reinforced with powdery CNFs (2–8 wt.%) and characterized in terms of flexural strength, compressive strength, diametral tensile strength, and fluoride-ion release properties. Powdery CNFs and samples subjected to flexural strength testing were observed via scanning electron microscopy. CNF incorporation was found to significantly improve the flexural, compressive, and diametral tensile strengths of GIC, and the corresponding composite was shown to contain fibrillar aggregates of nanofibers interspersed in the GIC matrix. No significant differences in fluoride-ion release properties were observed between the control GIC and the CNF-GIC composite. Thus, powdery CNFs were concluded to be a promising GIC reinforcement agent.

scholarly journals Flexural Strength of Glass Carbomer Cement and Conventional Glass Ionomer Cement Stored in Different Storage Media over Time

2018 ◽  
Vol 27 (4) ◽  
pp. 372-377 ◽  
Author(s):  
Muhammad Ali Faridi ◽  
Abdul Khabeer ◽  
Saad Haroon
Keyword(s):  
Flexural Strength ◽  
Artificial Saliva ◽  
Glass Ionomer Cement ◽  
Bending Test ◽  
Glass Ionomer ◽  
Time Intervals ◽  
Storage Media ◽  
Unique Factor ◽  
Post Hoc ◽  
Ionomer Cement

Objectives: Glass ionomer cement (GIC) is routinely placed as a restorative material in dentistry. However, due to its poor physical properties, its use is limited to cases where the level of stress on restoration is minimal. Improved formulations of GIC have been developed to overcome these drawbacks. The purpose of this study was to evaluate flexural strength of a conventional GIC (Fuji IX) against a newly developed glass carbomer cement (GCP). Materials and Methods: For Fuji IX and GCP, a total of 80 blocks were prepared and divided into 16 groups (n = 5). These groups were further categorized according to the storage medium (artificial saliva and Vaseline) and time intervals (24 h and 1, 2, and 4 weeks). A 3-point bending test was carried out, and statistical analysis was done using ANOVA and Tukey post hoc tests. Results: Fuji IX showed a mean flexural strength of 25.14 ± 13.02 versus 24.27 ± 12.57 MPa for GCP. There was no significant statistical difference between both materials when compared under storage media. Both materials showed the highest value for flexural strength at 2 weeks of storage and lowest at 4 weeks. Conclusion: The storage media do not affect the flexural strength of the specimens with reference to time. Time is the unique factor with relative influence on mean resistance to fracture. Further testing is required to evaluate the true potential of the newly developed GCP.

scholarly journals Mechanical Properties Enhancement of Conventional Glass Ionomer Cement by Adding Zirconium Oxide Micro and Nanoparticles

2019 ◽  
Vol 25 (2) ◽  
pp. 72-81 ◽  
Author(s):  
Ali N. Alobiedy ◽  
Ali H. Alhille ◽  
Ahmed R. Al-Hamaoy
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Wear Rate ◽  
Zirconium Oxide ◽  
Dental Materials ◽  
Glass Ionomer Cement ◽  
Nano Particles ◽  
Glass Ionomer ◽  
Biaxial Flexural Strength ◽  
Ionomer Cement

The aim of this work is to enhance the mechanical properties of the glass ionomer cement GIC (dental materials) by adding Zirconium Oxide ZrO2 in both micro and nano particles. GIC were mixed with (3, 5 and 7) wt% of both ZrO2 micro and nanoparticles separately. Compressive strength (CS), biaxial flexural strength (BFS), Vickers Microhardness (VH) and wear rate losses (WR) were investigated. The maximum compression strength was 122.31 MPa with 5 wt. % ZrO2 micro particle, while 3wt% nanoparticles give highest Microhardness and biaxial flexural strength of 88.8 VHN and 35.79 MPa respectively. The minimum wear rate losses were 3.776µg/m with 7 wt. % ZrO2 nanoparticle. GIC-containing ZrO2 micro and nanoparticles is a promising restorative material with improved mechanical properties expect wear rate losses.  

scholarly journals Comparative Evaluation of Flexural Strength of Glass Ionomer Cement and Cention N in Artificial Medium Over Time Intervals - An In-Vitro Study

2021 ◽  
Vol 10 (32) ◽  
pp. 2609-2614
Author(s):  
Risana K. ◽  
Prathyusha P ◽  
Amith Adyanthaya ◽  
Aparna Sivaraman ◽  
Nazreen Ayub K ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Artificial Saliva ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Bending Test ◽  
Glass Ionomer ◽  
Time Intervals ◽  
Significant Difference ◽  
Duration Of Storage ◽  
Ionomer Cement

BACKGROUND Glass ionomer cement (GIC) is a versatile restorative cement in paediatric dentistry. Due to its less flexural strength, alternative materials have been developed. Cention N is one such material, but since it’s a new material evidence is lacking regarding its physical properties, especially flexural strength for evaluating its clinical outcome. We wanted to compare the flexural strength of glass ionomer cement and Cention N stored in artificial saliva and its variation over different time intervals, i.e., after 24 hours, 1 week and 4 weeks. METHODS A total of 30 specimens were prepared for GIC (Fuji IX) and Cention N and were further categorized according to the duration of storage time of 24 hours, 1 week and 4 weeks (N = 10). A 3 - point bending test using a universal testing machine was used to evaluate the flexural strength. RESULTS GIC Fuji IX showed a mean flexural strength of 35.296 ± 1.61 Mpa at the end of 24 hours, 47.234 ± 4.12 after 1 week and 66.039 ± 11.05 Mpa at the end of 4 weeks. GIC showed a statistically significant increase of flexural strength from 24 hours to one week and a further increase after 4 weeks of storage. The flexural strength of Cention N at 24 hours was 175.985 ± 22.11 Mpa, at the end of one week was 163.486 ± 17.55 MPa, and after 4 weeks was 175.437 ± 27.22 Mpa. Cention N did not show any statistically significant change in flexural strength value from 24 hours to 4 weeks. Cention N showed highly significant difference between flexural strength compared to GIC at all - time intervals. CONCLUSIONS Cention N has a superior flexural strength compared to GIC at all - time intervals. KEY WORDS Cention N, Flexural Strength, Glass Ionomer Cement

scholarly journals Mechanical and Energy Engineering The effect of titanium oxide microparticles on mechanical properties, absorption and solubility processes of a glass ionomer cement

2020 ◽  
Vol 26 (3) ◽  
pp. 160-173
Author(s):  
Howrah M.A. Abbas ◽  
Ahmed Riedh Alhamaoy ◽  
Raad Dawood Salman
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Harmful Effect ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Tio2 Particles ◽  
Biaxial Flexural Strength ◽  
Acidic Beverages ◽  
Ionomer Cement

Glass Ionomer Cement (GIC) is one of the important dental temporary filing materials. The aim of this study is to evaluate the effect of adding 3, 5 and 7 wt. % of TiO2 microparticles to conventional GIC powder (Riva Self Cure) on mechanical properties and its effect on absorption and solubility processes. TiO2 particles additives improved compressive strength and biaxial flexural strength, where the compressive strength increased with increasing in the added ratio, while the highest value of the biaxial flexural strength was at 3 wt.%. The addition of TiO2 particles improved the surface Vickers microhardness values, with highest value at 5 wt. %. On other hand TiO2 addition improves the wear resistance as additives increased. The most acidic beverages (the lowest pH value) were the most effective in increasing the absorption and solubility percentage of samples. Orange juice was more effective followed by cola and then coffee and tea were less effective. Finally, its recommended that patients should reduce drinking these acidic beverages because its harmful effect on dental fillings.

The Effect of Hydroxyapatite on Bonding Strength in Light Curing Glass Ionomer Dental Cement

2006 ◽  
Vol 309-311 ◽  
pp. 881-884 ◽  
Author(s):  
M.H. Chae ◽  
Yong Keun Lee ◽  
Kyoung Nam Kim ◽  
Jae Hoon Lee ◽  
B.J. Choi ◽  
...  
Keyword(s):  
Flexural Strength ◽  
Physical Properties ◽  
Bonding Strength ◽  
Dental Materials ◽  
Glass Ionomer Cement ◽  
Ambient Light ◽  
Glass Ionomer ◽  
Depth Of Cure ◽  
Light Curing ◽  
Ionomer Cement

The mineral phase of bone and teeth is mainly hydroxyapatite. Currently there are numerous researches being conducted on the effect of the addition of hydroxyapatite to dental materials. Among them, several studied were published stating that the addition of hydroxyapatite to composite resin or glass ionomer cement resulted in an improvement in bonding strength and physical properties Therefore, this study will investigate the effect that the addition of hydroxyapatite to light curing glass ionomer cement has on bonding strength. Two different light curing glass ionomer cement products were selected (FujiⅡLC, GC Cor, Japan and Vitremer™ , 3M/ESPE, USA) and hydroxyapatite was mixed into the light curing glass ionomer cement at various concentrations to create hydroxyapatite-light curing glass ionomer cement mixture. In order to confirm that hydroxyapatite-light curing glass ionomer cement met the basic requirements of dental materials, sensitivity to ambient light, depth of cure, and flexural strength were tested. From the results of the above mentioned tests, the hydroxyapatite-light curing glass ionomer cement with the most superior physical properties for each product (15% HA-Fuji Ⅱ LC, 20% HA-Vitremer™)was bonded to the teeth and then immersed in artificial saliva(36.5°C) for four weeks. Finally the sectioned surface was observed under SEM after measuring the bonding strength. As the hydroxyapatite concentration increased, the depth of cure decreased. However flexural strength increased and there was not much change in the sensitivity to ambient light. Bonding strength, which was the main focus of this study, increased with the addition of hydroxyapatie and scanning electron microscope findings show a more cohesive type of fracture in the material with bone like apatite material formation along the tooth-material interface.

Flexural Strength Measurement of Ceramic Dental Restorative Materials

2007 ◽  
Vol 361-363 ◽  
pp. 873-876 ◽  
Author(s):  
Leif Hermansson ◽  
Lars Kraft ◽  
Karin Lindqvist ◽  
Nils Otto Ahnfelt ◽  
Hakan Engqvist
Keyword(s):  
Flexural Strength ◽  
Glass Ionomer Cement ◽  
Ceramic Materials ◽  
Test Method ◽  
Glass Ionomer ◽  
Point Bend Test ◽  
Point Bend ◽  
Dental Restorative ◽  
Ionomer Cement ◽  
Ball On Disc

Flexural strength of a dental material reflects its ability to withstand tensile stresses and thus the fracture risk of a filling. The flexural strength of an experimental bioceramic Calcium aluminate-based (CA) dental restorative material was measured using three different methods with a composite (Tetric Ceram), a glass ionomer cement (Fuji II) and a phosphate cement (Harward) as references. The three test methods were: a) ISO 4049 for dental composites, 3-point bend test b) EN 843-1 for ceramic materials, 3-point bend test and c) ASTM F-394, biaxial ball-on-disc for ceramic materials. The strength of the CA-material, tested in the ball-on-disc method, is close to the theoretical strength based on the microstructure of the material (max. grain size of 15 μm). The composite material and the phosphate cement were rather insensitive to the test method, while the glass ionomer cement as the CA-material showed sensitivity towards the test method. A modified biaxial test method for evaluation of strength of dental materials in a close to real-life component is proposed.

scholarly journals Extract of Propolis on Resin-Modified Glass Ionomer Cement: Effect on Mechanical and Antimicrobial Properties and Dentin Bonding Strength

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Narges Panahandeh ◽  
Fatemeh Adinehlou ◽  
Seyedeh Mahsa Sheikh-Al-Eslamian ◽  
Hassan Torabzadeh
Keyword(s):  
Antibacterial Activity ◽  
Flexural Strength ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Glass Ionomer Cement ◽  
Antimicrobial Properties ◽  
Control Group ◽  
Glass Ionomer ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

This study assessed the effect of addition of aqueous extract of propolis in different concentrations on the mechanical and antimicrobial properties of resin-modified glass ionomer cement (RMGIC). In this in vitro study, powder of Fuji II LC RMGIC was mixed with 25% and 50% aqueous extracts of propolis. Samples (n = 15 for shear bond strength, n = 5 for flexural strength, and n = 20 for the antibacterial activity test) were fabricated using this mixture. The buccal and lingual surfaces of 23 premolars were ground to expose dentin. Tygon tubes were filled with cement, bonded to dentin, and subjected to bond or the flexural strength test in a universal testing machine. Antibacterial activity was assessed using the disc diffusion and well-plate techniques against S. mutans. Data were analyzed using one-way ANOVA and Tukey’s test. The three groups showed significant differences ( p  < 0.001). The 50% propolis group had the lowest flexural and shear bond strength. The control group had the highest flexural and shear bond strength. No growth inhibition zone was noted around any of the discs. It can be concluded that addition of propolis to RMGIC did not confer any antibacterial activity against S. mutans and decreased the flexural and shear bond strength of RMGIC.

Sign in / Sign up

Export Citation Format

Share Document