scholarly journals Development of Type Curves for Gas Production from Hydraulically Fractured Horizontal Wells in Unconventional Reservoirs

2011 ◽  
Author(s):  
Faisal N. Alenezi
Keyword(s):  
Horizontal Wells ◽  
Gas Production ◽  
Unconventional Reservoirs ◽  
Type Curves ◽  
Fractured Horizontal Wells

History Matching and Rate Forecasting in Unconventional Oil Reservoirs With an Approximate Analytical Solution to the Double-Porosity Model

2015 ◽  
Vol 19 (01) ◽  
pp. 070-082 ◽  
Author(s):  
B. A. Ogunyomi ◽  
T. W. Patzek ◽  
L. W. Lake ◽  
C. S. Kabir
Keyword(s):  
Analytical Solution ◽  
History Matching ◽  
Horizontal Wells ◽  
Double Porosity ◽  
Unconventional Reservoirs ◽  
Production Data ◽  
Time Space ◽  
Double Porosity Model ◽  
Fractured Horizontal Wells ◽  
Porosity Model

Summary Production data from most fractured horizontal wells in gas and liquid-rich unconventional reservoirs plot as straight lines with a one-half slope on a log-log plot of rate vs. time. This production signature (half-slope) is identical to that expected from a 1D linear flow from reservoir matrix to the fracture face, when production occurs at constant bottomhole pressure. In addition, microseismic data obtained around these fractured wells suggest that an area of enhanced permeability is developed around the horizontal well, and outside this region is an undisturbed part of the reservoir with low permeability. On the basis of these observations, geoscientists have, in general, adopted the conceptual double-porosity model in modeling production from fractured horizontal wells in unconventional reservoirs. The analytical solution to this mathematical model exists in Laplace space, but it cannot be inverted back to real-time space without use of a numerical inversion algorithm. We present a new approximate analytical solution to the double-porosity model in real-time space and its use in modeling and forecasting production from unconventional oil reservoirs. The first step in developing the approximate solution was to convert the systems of partial-differential equations (PDEs) for the double-porosity model into a system of ordinary-differential equations (ODEs). After which, we developed a function that gives the relationship between the average pressures in the high- and the low-permeability regions. With this relationship, the system of ODEs was solved and used to obtain a rate/time function that one can use to predict oil production from unconventional reservoirs. The approximate solution was validated with numerical reservoir simulation. We then performed a sensitivity analysis on the model parameters to understand how the model behaves. After the model was validated and tested, we applied it to field-production data by partially history matching and forecasting the expected ultimate recovery (EUR). The rate/time function fits production data and also yields realistic estimates of ultimate oil recovery. We also investigated the existence of any correlation between the model-derived parameters and available reservoir and well-completion parameters.

scholarly journals Water-Gas Two-Phase Flow Behavior of Multi-Fractured Horizontal Wells in Shale Gas Reservoirs

Processes ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 664 ◽  
Author(s):  
Lei Li ◽  
Guanglong Sheng ◽  
Yuliang Su
Keyword(s):  
Organic Matter ◽  
Shale Gas ◽  
Flow Behavior ◽  
Horizontal Wells ◽  
Gas Production ◽  
Phase Flow ◽  
Gas Reservoirs ◽  
Two Phase ◽  
Fractured Horizontal Wells ◽  
Water Gas

Hydraulic fracturing is a necessary method to develop shale gas reservoirs effectively and economically. However, the flow behavior in multi-porosity fractured reservoirs is difficult to characterize by conventional methods. In this paper, combined with apparent porosity/permeability model of organic matter, inorganic matter and induced fractures, considering the water film in unstimulated reservoir volume (USRV) region water and bulk water in effectively stimulated reservoir volume (ESRV) region, a multi-media water-gas two-phase flow model was established. The finite difference is used to solve the model and the water-gas two-phase flow behavior of multi-fractured horizontal wells is obtained. Mass transfer between different-scale media, the effects of pore pressure on reservoirs and fluid properties at different production stages were considered in this model. The influence of the dynamic reservoir physical parameters on flow behavior and gas production in multi-fractured horizontal wells is studied. The results show that the properties of the total organic content (TOC) and the inherent porosity of the organic matter affect gas production after 40 days. With the gradual increase of production time, the gas production rate decreases rapidly compared with the water production rate, and the gas saturation in the inorganic matter of the ESRV region gradually decreases. The ignorance of stress sensitivity would cause the gas production increase, and the ignorance of organic matter shrinkage decrease the gas production gradually. The water film mainly affects gas production after 100 days, while the bulk water has a greater impact on gas production throughout the whole period. The research provides a new method to accurately describe the two-phase fluid flow behavior in different scale media of fractured shale gas reservoirs.

Characterizing Tight Oil Reservoirs With Dual- and Triple-Porosity Models

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Ezulike Daniel Obinna ◽  
Dehghanpour Hassan
Keyword(s):  
Aspect Ratio ◽  
Horizontal Wells ◽  
Production Data ◽  
Hydraulic Fractures ◽  
High Fracture ◽  
Type Curves ◽  
Fracture Spacing ◽  
Aspect Ratios ◽  
Fractured Horizontal Wells ◽  
Porosity Model

The response of existing transient triple-porosity models for fractured horizontal wells do not converge to that of linear dual-porosity model (DPM) in the absence of natural/microfractures (MFs). The main reason is the assumption of sequential-depletion from matrix to MF, and from MF to hydraulic-fractures (HFs). This can result in unreasonable estimates of MF and/or HF parameters. Hence, the authors proposed a quadrilinear flow model (QFM) in a previous paper which relaxes this sequential-depletion assumption to allow simultaneous matrix–MF and matrix–HF depletion. Also, it is proved that QFM simplifies to both DPM and linear sequential triple-porosity model (STPM). This work considers the implications of applying QFM, STPM, and DPM type-curves and analysis equations on production data of two fractured horizontal wells completed in the Bakken and Cardium Formations. A comparative study of the reservoir parameters estimated from the application of these models to the same production data reveals two key results. First, the application of DPM on the production data from reservoirs with active MF could result in overestimation of HF half-length. This happens to compensate for the extra fluid depletion pathways provided by MF. Second, the application of STPM on the production data from the reservoirs with active matrix–HF communication could result in overestimation of the MF intensity. Results from this study are significant when selecting the appropriate model for interpreting production data from fractured horizontal wells completed in formations with or without active MF. The DPM is appropriate if analog studies (e.g., outcrop, microseismic and image log analyses) reveal high fracture spacing aspect ratio (negligible MF) in the reservoir. Fracture spacing aspect ratio is MF spacing divided by the HF spacing. The STPM is appropriate if analog studies reveal low spacing aspect ratio (e.g., matrix–HF face damage or high MF intensity within a given HF spacing). QFM is appropriate for all fracture spacing aspect ratios.

Sign in / Sign up

Export Citation Format

Share Document