scholarly journals Development of type curves for gas production from horizontal wells in conventional reservoirs

2009 ◽  
Author(s):  
Abdullah M. Almansour
Keyword(s):  
Horizontal Wells ◽  
Gas Production ◽  
Type Curves

Comprehensive Analysis of Production Loggings in Fuling Shale Gas Play in China

2021 ◽  
Author(s):  
Yaowen Liu ◽  
Wei Pang ◽  
Jincai Shen ◽  
Ying Mi
Keyword(s):  
Shale Gas ◽  
Mineral Content ◽  
Horizontal Wells ◽  
Organic Content ◽  
Gas Production ◽  
Liquid Loading ◽  
Comprehensive Overview ◽  
Gas Field ◽  
Well Trajectory ◽  
Positive Effect

Abstract Fuling shale gas field is one of the most successful shale gas play in China. Production logging is one of the vital technologies to evaluate the shale gas contribution in different stages and different clusters. Production logging has been conducted in over 40 wells and most of the operations are successful and good results have been observed. Some previous studies have unveiled one or several wells production logging results in Fuling shale gas play. But production logging results show huge difference between different wells. In order to get better understanding of the results, a comprehensive overview is carried out. The effect of lithology layers, TOC (total organic content), porosity, brittle mineral content, well trajectory is analyzed. Results show that the production logging result is consistent with the geology understanding, and fractures in the favorable layers make more gas contribution. Rate contribution shows positive correlation with TOC, the higher the TOC, the greater the rate contribution per stage. For wells with higher TOC, the rate contribution difference per stage is relatively smaller, but for wells with lower TOC, it shows huge rate contribution variation, fracture stages with TOC lower than 2% contribute very little, and there exist one or several dominant fractures which contributes most gas rate. Porosity and brittle minerals also show positive effect on rate contribution. The gas rate contribution per fracture stage increases with the increase of porosity and brittle minerals. The gas contribution of the front half lateral and that of latter half lateral are relatively close for the "upward" or horizontal wells. However, for the "downward" wells, the latter half lateral contribute much more gas than the front half lateral. It is believed that the liquid loading in the toe parts reduced the gas contribution in the front half lateral. The overview research is important to get a compressive understanding of production logging and different fractures’ contribution in shale gas production. It is also useful to guide the design of horizontal laterals and fractures scenarios design.

Advanced Well Completion Strategies to Improve Gas Production Deliverability in Marginal Tight Gas Reservoirs from an Onshore Abu Dhabi Gas Field

2021 ◽  
Author(s):  
Hajar Ali Abdulla Al Shehhi ◽  
Bondan Bernadi ◽  
Alia Belal Zuwaid Belal Al Shamsi ◽  
Shamma Jasem Al Hammadi ◽  
Fatima Omar Alawadhi ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Gas Production ◽  
Abu Dhabi ◽  
Tight Gas ◽  
Production Rates ◽  
Well Productivity ◽  
Gas Saturation ◽  
Well Design ◽  
The Impact

Abstract Reservoir X is a marginal tight gas condensate reservoir located in Abu Dhabi with permeability of less than 0.05 mD. The field was conventionally developed with a few single horizontal wells, though sharp production decline was observed due to rapid pressure depletion. This study investigates the impact of converting the existing single horizontal wells into single long horizontal, dual laterals, triple laterals, fishbone design and hydraulic fracturing in improving well productivity. The existing wells design modifications were planned using a near reservoir simulator. The study evaluated the impact of length, trajectory, number of laterals and perforation intervals. For Single, dual, and triple lateral wells, additional simulation study with hydraulic fracturing was carried out. To evaluate and obtain effective comparisons, sector models with LGR was built to improve the simulation accuracy in areas near the wellbore. The study conducted a detailed investigation into the impact of various well designs on the well productivity. It was observed that maximizing the reservoir contact and targeting areas with high gas saturation led to significant increase in the well productivity. The simulation results revealed that longer laterals led to higher gas production rates. Dual lateral wells showed improved productivity when compared to single lateral wells. This incremental gain in the production was attributed to increased contact with the reservoir. The triple lateral well design yielded higher productivity compared to single and dual lateral wells. Hydraulic fracturing for single, dual, and triple lateral wells showed significant improvement in the gas production rates and reduced condensate banking near the wellbore. A detailed investigation into the fishbone design was carried out, this involved running sensitivity runs by varying the number of branches. Fishbone design showed considerable increment in production when compared to other well designs This paper demonstrates that increasing the reservoir contact and targeting specific areas of the reservoir with high gas saturation can lead to significant increase in the well productivity. The study also reveals that having longer and multiple laterals in the well leads to higher production rates. Hydraulic fracturing led to higher production gains. Fishbone well design with its multiple branches showed the most production again when compared to other well designs.

Simultaneous Hydraulic Fracturing Improves Completion Efficiency and Lowers Costs Per Foot

2021 ◽  
Author(s):  
David Russell ◽  
Price Stark ◽  
Sean Owens ◽  
Awais Navaiz ◽  
Russell Lockman
Keyword(s):  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Asset Returns ◽  
Gas Production ◽  
Well Performance ◽  
Additional Time ◽  
Oil And Gas Production ◽  
Single Well ◽  
Lateral Length

Abstract Reducing well costs in unconventional development while maintaining or improving production continues to be important to the success of operators. Generally, the primary drivers for oil and gas production are treatment fluid volume, proppant mass, and the number of stages or intervals along the well. Increasing these variables typically results in increased costs, causing additional time and complexity to complete these larger designs. Simultaneously completing two wells using the same volumes, rates, and number of stages as for any previous single well, allows for more lateral length or volume completed per day. This paper presents the necessary developments and outcomes of a completion technique utilizing a single hydraulic fracturing spread to simultaneously stimulate two or more horizontal wells. The goal of this technique is to increase operational efficiency, lower completion cost, and reduce the time from permitting a well to production of that well—without negatively impacting the primary drivers of well performance. To date this technique has been successfully performed in both the Bakken and Permian basins in more than 200 wells, proving its success can translate to other unconventional fields and operations. Ultimately, over 200 wells were successfully completed simultaneously, resulting in a 45% increase in completion speed and significant decrease in completion costs, while still maintaining equivalent well performance. This type of simultaneous completion scenario continues to be implemented and improved upon to improve asset returns.

Production Performance Analysis for Multi-Branched Horizontal Wells in Composite Coal Bed Methane Reservoir Considering Stress Sensitivity

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
Ruizhong Jiang ◽  
Xiuwei Liu ◽  
Yongzheng Cui ◽  
Xing Wang ◽  
Yue Gao ◽  
...  
Keyword(s):  
Superposition Principle ◽  
Horizontal Wells ◽  
Stress Sensitivity ◽  
Field Application ◽  
Model Verification ◽  
Production Performance ◽  
Coal Bed ◽  
Coal Bed Methane ◽  
Element Discretization ◽  
Type Curves

Abstract Coal bed methane (CBM) significantly contributes to unconventional energy resources. With the development of the drilling technology, multi-branched horizontal wells (MBHWs) have been put into the exploitation of CBM. In this paper, a semi-analytical mathematical model is introduced to study the production characteristics of MBHWs in the composite CBM reservoir. Stress sensitivity, composite reservoir, and complex seepage mechanisms (desorption, diffusion, and Darcy flow) are taken into consideration. Through Pedrosa transformation, Perturbation transformation, Laplace transformation, Finite cosine transformation, element discretization, superposition principle, and Stehfest numerical inversion, pseudo-pressure dynamic curves and production decline curves are plotted and 13 flow regimes are divided. Then, the sensitivity analysis of related parameters is conducted to study the influences of these parameters based on these two type curves. Model verification and field application are introduced which shows that the model is reliable. The model proposed in this paper and relevant results analysis can provide some significant guidance for a better understanding of the production behavior of MBHWs in the composite CBM reservoir.

Plug and Abandonment Environment in British Columbia

2019 ◽  
Author(s):  
Majid Bizhani ◽  
Élizabeth Trudel ◽  
Ian Frigaard
Keyword(s):  
British Columbia ◽  
Fractured Reservoirs ◽  
Horizontal Wells ◽  
Gas Production ◽  
Vertical Wells ◽  
Gas Industry ◽  
Testing Procedures ◽  
The Past ◽  
Production Wells ◽  
Well Abandonment

Abstract British Columbia (BC) has a significant oil & gas industry, with approximately 25,000 wells drilled in the province since the early 1900s. In the past few decades, the industry has changed from a balanced oil & gas production to activities dominated by unconventional gas production which is recovered by hydraulic fracturing. Concurrently, since 2000 there has been a shift from isolated vertical wells to pad-drilled horizontal wells. The older well stock at end-of-life combines with horizontal production wells and fractured reservoirs, the consequence of which is a growing wave of abandonment in BC, building over the next decade. This paper reviews the existing data on BC wells, as it is relevant to well abandonment operations. This includes the well architectures, trajectories, depths, testing procedures, etc.

Sign in / Sign up

Export Citation Format

Share Document