scholarly journals The Impact of Archetype Patterns in Office Buildings on the Annual Cooling, Heating and Lighting Loads in Hot-Humid, Hot-Dry and Cold Climates of Iran

2019 ◽  
Vol 11 (2) ◽  
pp. 311 ◽  
Author(s):  
Jalil Shaeri ◽  
Mahmood Yaghoubi ◽  
Amin Habibi ◽  
Ata Chokhachian
Keyword(s):  
Energy Consumption ◽  
Linear Form ◽  
Office Buildings ◽  
Office Building ◽  
Building Industry ◽  
Natural Light ◽  
Cold Climates ◽  
Reduce Energy Consumption ◽  
Lighting Loads ◽  
The Impact

Extensive cost in the building industry comes from cooling and heating to create thermal comfort. Hence, it is necessary to utilize passive solutions, in addition to suitable design, in order to reduce energy consumption. This research attempts to investigate the impact of archetype patterns in office buildings on annual energy consumption for cooling, heating and daylight loads. For this purpose, the DesignBuilder software was used to compare the forms. In this study, four conventional construction forms were considered, including the single and dense form, central courtyard buildings, U form and linear form, and each was considered with two, four and six-stories. Forms were simulated in the three cities of Bushehr, Shiraz and Tabriz, with hot-humid, hot-dry and cold climates, respectively. The results revealed that the office building with a linear form in Bushehr had the lowest energy consumption in the two and four-story forms, and also in the six-story form, the central courtyard form had the lowest energy consumption. Additionally, the central courtyard forms in Tabriz and Shiraz had the lowest energy consumption in all cases. Finally, the linear form possessed the most natural daylight through all of the studied cases for the three cities in terms of natural light gain.

Energy efficiency practices for Malaysian green office building occupants

2018 ◽  
Vol 8 (2) ◽  
pp. 134-146 ◽  
Author(s):  
Chukwuka Christian Ohueri ◽  
Wallace Imoudu Enegbuma ◽  
Russell Kenley
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Building Materials ◽  
Office Buildings ◽  
Strategy Training ◽  
Office Building ◽  
Performance Gap ◽  
Content Type ◽  
Behavioural Strategy ◽  
Reduce Energy Consumption

Purpose Green building construction was adopted as a strategy to reduce energy consumption and the overall impact of the built environment on our natural environment. However, in Malaysia, previous studies have reaffirmed that green office buildings consume a substantial amount of energy, compared to their counterparts in Singapore. Moreover, there is still a significant performance gap between predicted energy measurements and actual operational energy consumption of green office buildings in Malaysia, due to occupants’ behavioural discrepancies. Therefore, the purpose of this paper is to develop energy efficiency practices for occupants of green office buildings in Malaysia. The developed practices integrate technology, organisation policy, and occupants’ behavioural strategies, in order to reduce the energy consumption of green office buildings in Malaysia. Design/methodology/approach To achieve the research goal, a mixed (quantitative and qualitative) research method was used to collect data from the research population. In total, 53 respondents working in a green office building complex in Kuala Lumpur Malaysia were surveyed using a questionnaire. Additionally, three top management staff of the green office building and two Malaysian construction professionals were interviewed. The study adopted convenience sampling technique in selecting the research respondents. The data from the questionnaire were analysed using SPSS software (version 22) while the interview data were analysed via thematic content analysis. Findings The findings suggest that the integration of technological strategy (use of BIM tools, sustainable building materials, etc.); organisational strategy (develop, implement and evaluate action plans, use of monitor/control systems, etc.); and occupants behavioural strategy (training, incentives, occupants energy efficiency guide, etc.) will critically reduce energy consumption of green office buildings in Malaysia. Originality/value Based on the findings, energy efficiency practices are developed to guide occupants in reducing the energy consumption of green office buildings in Malaysia. This strategy will contribute to reducing the performance gap that exists between predicted energy and actual energy use of green office buildings in Malaysia. However, the developed energy efficiency practices need to be validated to ascertain its workability in the green office building context.

scholarly journals A Fundamental Study on the Development of New Energy Performance Index in Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2064
Author(s):  
Jin-Hee Kim ◽  
Seong-Koo Son ◽  
Gyeong-Seok Choi ◽  
Young-Tag Kim ◽  
Sung-Bum Kim ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Requirement ◽  
Energy Performance ◽  
Office Buildings ◽  
Light Transmittance ◽  
Wall Structure ◽  
Fundamental Study ◽  
Future Studies ◽  
U Value ◽  
The Impact

Recently, there have been significant concerns regarding excessive energy use in office buildings with a large window-to-wall ratio (WWR) because of the curtain wall structure. However, prior research has confirmed that the impact of the window area on energy consumption varies depending on building size. A newly proposed window-to-floor ratio (WFR) correlates better with energy consumption in the building. In this paper, we derived the correlation by analyzing a simulation using EnergyPlus, and the results are as follows. In the case of small buildings, the results of this study showed that the WWR and energy requirement increase proportionally, and the smaller the size is, the higher the energy sensitivity will be. However, results also confirmed that this correlation was not established for buildings approximately 3600 m2 or larger. Nevertheless, from analyzing the correlation between the WFR and the energy requirements, it could be deduced that energy required increased proportionally when the WFR was 0.1 or higher. On the other hand, the correlation between WWR, U-value, solar heat gain coefficient (SHGC), and material property values of windows had little effect on energy when the WWR was 20%, and the highest effect was seen at a WWR of 100%. Further, with an SHGC below 0.3, the energy requirement decreased with an increasing WWR, regardless of U-value. In addition, we confirmed the need for in-depth research on the impact of the windows’ U-value, SHGC, and WWR, and this will be verified through future studies. In future studies on window performance, U-value, SHGC, visible light transmittance (VLT), wall U-value as sensitivity variables, and correlation between WFR and building size will be examined.

Potential Impacts of Net-Zero Energy Buildings With Distributed Photovoltaic (PV) Power Generation on the Electrical Grid

2018 ◽  
Author(s):  
Dongsu Kim ◽  
Heejin Cho ◽  
Rogelio Luck
Keyword(s):  
Power Generation ◽  
Electricity Demand ◽  
Office Buildings ◽  
Office Building ◽  
Electrical Grid ◽  
Net Zero ◽  
Demand Profile ◽  
The Impact ◽  
Pv Power Generation ◽  
The U.S

This study evaluates potential aggregate effects of net-zero energy building (NZEB) implementations on the electrical grid in simulation-based analysis. Many studies have been conducted on how effective NZEB designs can be achieved, however the potential impact of NZEBs have not been explored sufficiently. As significant penetration of NZEBs occurs, the aggregated electricity demand profile of the buildings on the electrical grid would experience dramatic changes. To estimate the impact of NZEBs on the electrical grid, a simulation-based study of an office building with a grid-tied PV power generation system is conducted. This study assumes that net-metering is available for NZEBs such that the excess on-site PV generation can be fed to the electrical grid. The impact of electrical energy storage (EES) within NZEBs on the electrical grid is also considered in this study. Finally, construction weighting factors of the office building type in U.S. climate zones are used to estimate the number of national office buildings. In order to consider the adoption of NZEBs in the future, this study examines scenarios with 20%, 50%, and 100% of the U.S. office building stock are composed of NZEBs. Results show that annual electricity consumption of simulated office buildings in U.S. climate locations includes the range of around 85 kWh/m2-year to 118 kWh/m2-year. Each simulated office building employs around 242 kWp to 387 kWp of maximum power outputs in the installation of on-site PV power systems to enable NZEB balances. On a national scale, the daily on-site PV power generation within NZEBs can cover around 50% to 110% of total daily electricity used in office buildings depending on weather conditions. The peak difference of U.S. electricity demand typically occurs when solar radiation is at its highest. The peak differences from the actual U.S. electricity demand on the representative summer day show 9.8%, 4.9%, and 2.0% at 12 p.m. for 100%, 50%, and 20% of the U.S. NZEB stocks, respectively. Using EES within NZEBs, the peak differences are reduced and shifted from noon to the beginning of the day, including 7.7%, 3.9%, and 1.5% for each percentage U.S. NZEB stock. NZEBs tend to create the significant curtailment of the U.S. electricity demand profile, typically during the middle of the winter day. The percentage differences at a peak point (12 p.m.) are 8.3%, 4.2%, and 1.7% for 100%, 50%, and 20% of the U.S. NZEB stocks, respectively. However, using EES on the representative winter day can flatten curtailed electricity demand curves by shifting the peak difference point to the beginning and the late afternoon of the day. The shifted peak differences show 7.4%, 3.7%, and 1.5% at 9 a.m. for three U.S. NZEB stock scenarios, respectively.

scholarly journals The Impact of Aspect Ratio on External Heat Gain of Multi-storey Office Buildings in Jakarta

2018 ◽  
Vol 16 (1) ◽  
pp. 24-31
Author(s):  
Wasiska Iyati ◽  
◽  
Eryani Nurma Yulita ◽  
Jusuf Thojib ◽  
Heru Sufianto ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
Building Design ◽  
Climatic Conditions ◽  
Building Envelope ◽  
External Heat ◽  
Office Buildings ◽  
Office Building ◽  
Cooling Load ◽  
Heat Gain ◽  
The Impact

The narrow land in big cities such as Jakarta, increases the amount of high rise building, especially multi-storey office building. Office building consumes much energy to provide air conditioning to meet the thermal comfort inside the building. On the other hand, the building shape, building envelope, and building orientation to the sun's position are the main factors in building design aspects that affect the amount of cooling load. This study aims to investigate the impact of the aspect ratio or the ratio of the longer dimension of an oblong plan to the shorter, on external heat gain of multi-storey office building. Variables examined include the transparent and solid area of building envelope, the total area of the surface of the building envelope in any orientation, and the volume of the building, as well as the influence of those proportion on the external heat gain. This study uses mathematical calculations to predict the cooling load of the building, particularly external heat gain through the walls, roof and glass, as well as comparative analysis of models studied. The study also aims to generate the design criteria of building form and proportion of multi-storey office buildings envelope with lower external heat gain. In Jakarta climatic conditions, the result on rectangular building plan with aspect ratio of 1 to 4 shows that the external heat gain did not differ significantly, and the smallest heat gain is found on the aspect ratio of 1.8. Results also showed that the greater aspect ratio, the greater reduction of external heat gain obtained by changing the orientation of the longest side facing east-west into the north-south, about 2.79% up to 42.14% on the aspect ratio of 1.1 to 4. In addition, it is known that in same building volume, changing the number of floors from 10 to 50 can improve the external heat gain almost twice.

scholarly journals Intelligent Energy Management Strategy for Automated Office Buildings

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4326 ◽  
Author(s):  
Simplice Igor Noubissie Tientcheu ◽  
Shyama P. Chowdhury ◽  
Thomas O. Olwal
Keyword(s):  
Energy Consumption ◽  
Intelligent System ◽  
Weather Condition ◽  
Electrical Energy ◽  
Integrated System ◽  
Office Buildings ◽  
Photovoltaic System ◽  
Energy Management Strategy ◽  
Significant Saving ◽  
The Impact

The increasing demand to reduce the high consumption of end-use energy in office buildings framed the objective of this work, which was to design an intelligent system management that could be utilized to minimize office buildings’ energy consumption from the national electricity grid. Heating, Ventilation and Air Conditioning (HVAC) and lighting are the two main consumers of electricity in office buildings. Advanced automation and control systems for buildings and their components have been developed by researchers to achieve low energy consumption in office buildings without considering integrating the load consumed and the Photovoltaic system (PV) input to the controller. This study investigated the use of PV to power the HVAC and lighting equipped with a suitable control strategy to improve energy saving within a building, especially in office buildings where there are reports of high misuse of electricity. The intelligent system was modelled using occupant activities, weather condition changes, load consumed and PV energy changes, as input to the control system of lighting and HVAC. The model was verified and tested using specialized simulation tools (Simulink®) and was subsequently used to investigate the impact of an integrated system on energy consumption, based on three scenarios. In addition, the direct impact on reduced energy cost was also analysed. The first scenario was tested in simulation of four offices building in a civil building in South Africa of a single occupant’s activities, weather conditions, temperature and the simulation resulted in savings of HVAC energy and lighting energy of 13% and 29%, respectively. In the second scenario, the four offices were tested in simulation due to the loads’ management plus temperature and occupancy and it resulted in a saving of 20% of HVAC energy and 29% of lighting electrical energy. The third scenario, which tested integrating PV energy (thus, the approach utilized) with the above-mentioned scenarios, resulted in, respectively, 64% and 73% of HVAC energy and lighting electrical energy saved. This saving was greater than that of the first two scenarios. The results of the system developed demonstrated that the loads’ control and the PV integration combined with the occupancy, weather and temperature control, could lead to a significant saving of energy within office buildings.

scholarly journals High performance envelope design for the modular building system

2021 ◽  
Author(s):  
Hawkins David
Keyword(s):  
Energy Consumption ◽  
High Performance ◽  
Building Envelope ◽  
Building Industry ◽  
Air Infiltration ◽  
Demand Reduction ◽  
Air Tightness ◽  
Reduce Energy Consumption ◽  
Building System ◽  
Hygrothermal Analysis

The best way to reduce energy consumption in homes is to reduce air infiltration and increase thermal resistance of the building envelope. This research aimed to develop four envelope systems for the modular building system that are super insulated and designed for maximum air tightness. Rigid sheathing with taped seams is a superior air sealing strategy compared to existing air barrier systems used in barrier systems used in the modular building industry. Connection details were developed for vulnerable connection locations using long lasting air sealing methodologies. Connection interfaces were modeled with THERM software and two connections had bridging more than Ψ 0.01[W/m⋅k]. Hygrothermal analysis revealed that the moisture content of the structural sheathing layer of the assemblies maintained at safe levels. Annual heating demand reduction of 64-69% was simulated using the proposed four assemblies compared to an OBC 2012 building code baseline envelope assembly.

scholarly journals Energy Efficient Air Curtains for Industrial Gates in Cold Climates

2021 ◽  
Vol 246 ◽  
pp. 08005
Author(s):  
A.S. Strongin ◽  
A.M. Zhivov
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Efficient ◽  
Air Conditioning ◽  
Thermal Power ◽  
Hvac Systems ◽  
Energy Resources ◽  
Cold Climates ◽  
Construction Costs ◽  
Reduce Energy Consumption

In geographical areas with cold climates, large, massively constructed industrial and warehouse buildings and logistics complexes are large consumers of energy resources. The great height and large contained volumes of the premises, the presence of a significant number of doors, and building configurations that include many transport corridors all require the use of air-thermal curtains to increase the energy efficiency of the buildings’ heating, ventilating, and air-conditioning (HVAC) systems, which commonly produce several thousand kilowatts of thermal power. Optimization of air curtains can improve the microclimates of the premises, achieve savings in the initial construction costs, and also reduce energy consumption during operation by 10–20%.

scholarly journals High performance envelope design for the modular building system

2021 ◽  
Author(s):  
Hawkins David
Keyword(s):  
Energy Consumption ◽  
High Performance ◽  
Building Envelope ◽  
Building Industry ◽  
Air Infiltration ◽  
Demand Reduction ◽  
Air Tightness ◽  
Reduce Energy Consumption ◽  
Building System ◽  
Hygrothermal Analysis

The best way to reduce energy consumption in homes is to reduce air infiltration and increase thermal resistance of the building envelope. This research aimed to develop four envelope systems for the modular building system that are super insulated and designed for maximum air tightness. Rigid sheathing with taped seams is a superior air sealing strategy compared to existing air barrier systems used in barrier systems used in the modular building industry. Connection details were developed for vulnerable connection locations using long lasting air sealing methodologies. Connection interfaces were modeled with THERM software and two connections had bridging more than Ψ 0.01[W/m⋅k]. Hygrothermal analysis revealed that the moisture content of the structural sheathing layer of the assemblies maintained at safe levels. Annual heating demand reduction of 64-69% was simulated using the proposed four assemblies compared to an OBC 2012 building code baseline envelope assembly.

scholarly journals The impact of building envelope retrofit measures on postwar MURBS in Toronto

2021 ◽  
Author(s):  
Sara Damyar
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Energy Use ◽  
Energy Savings ◽  
Building Envelope ◽  
Simulation Software ◽  
Energy Simulation ◽  
Reduce Energy Consumption ◽  
The Impact ◽  
Current Standards

Building envelope retrofits is one of the options available to reduce energy consumption of postwar MURBs in Toronto. This study evaluates the impact of building envelope retrofits that meet current standards on energy consumption of a Toronto postwar MURB; utilizing eQUEST energy simulation software. Further upgrades also take place to evaluate how the impact of building envelope retrofits on energy use can be increased and optimized for all assemblies of building envelope and airtightness. Moreover, the retrofit strategies are ranked based on cost and energy-saving effectiveness. The results of the analysis reveal that building envelope retrofit based on OBC-2012 standards can reduce the energy consumption by up to 44%. Furthermore, the optimal RSI values of all building envelope components were found to be equal or less than code requirements which outcomes significant energy savings. Lastly, the ranking of the strategies helps to identify the best option according to the priorities of a project.

Sign in / Sign up

Export Citation Format

Share Document