Moisture control design has to respond to all relevant hygrothermal loads

Moisture related damage is still a formidable cost factor in the building sector. Besides installation deficiencies, moisture control design failures are the most frequent reasons for moisture problems. Therefore, adequate moisture control analysis has become the key for sustainable buildings. However, by focusing on vapour diffusion only other important moisture loads such as driving rain, construction moisture or air infiltration are mostly neglected. Therefore, international moisture control standards often refer to simulation models for more realistic analysis, leaving many practitioners wondering how to handle these tools. To overcome this dilemma, the updated German moisture control standard has introduced a three-pathway approach for design evaluation: 1 st deemed to satisfy list, 2 nd restricted Glaser calculation and 3 rd fully fledged hygrothermal simulation. The third pathway includes the option to account for small leaks or imperfections in building envelope components. Guidelines in other countries are also embracing similar moisture control approaches which gives hope for more durable and sustainable building design. To reach this aim, moisture control should also become an integral part of the design process instead of a secondary chore.

Investigation of outdoor air pollutant, PM2.5 affecting the indoor air quality in a high-rise building

This study investigated the impact of outdoor air pollutants on indoor air quality in a high-rise building, considering factors related to the seasons and air infiltration. Further, the impact of atmospheric weather conditions on air infiltration has been analysed in a downtown area of Suzhou, China. The influence of the outdoor air pollution rate on indoor air quality in the office building was investigated based on on-site measurements and computer simulations. Results showed that the impact of outdoor air pollutants on indoor air quality was highest in winter, followed by spring, autumn and summer. Furthermore, multiple factors, which affect the indoor air quality in a high-rise building, have been further investigated in this study, including stack effect, wind effect, infiltration rate, outdoor air pollution rate, seasonal change and air filter efficiency. The significant influence of these factors on the indoor air quality level with floor height variations has been verified. Based on the analysis, a high-efficiency filter is recommended to maintain healthy indoor air quality. Meanwhile, a double-filter system is required if a building is exposed to heavily polluted outdoor air considering the most substantial impact of outdoor air pollutants on indoor air quality in winter. Moreover, a numerical model of steady-state indoor PM2.5 concentration was established to determine the suitable air filter efficiency and airtightness.

The Required Amount of Ventilation Air for the Classroom and the Possibility of Air Infiltration through the Windows

The majority of education buildings in Poland are equipped with natural (gravity) ventilation, where the air inflow depends on the level of window airtightness. A complete statistical urban population of 50 school buildings in Czestochowa have been examined. The main issue to be clarified is the answer to the following questions: Is it theoretically possible to supply enough air to meet the ventilation requirements with gravity ventilation? What is the airtightness of the windows at which it will be possible? The average technical conditions of windows in the analysed buildings were bad. However, only in the case in which high external air leakage coefficient a = 7.0 m3/(h m daPa2/3) (q100KL = 32.4912 m3/(h m) is the amount of air passing through the leaks similar to the quantitative ventilation requirements for classrooms. The quantity of air flowing from the outside through modernized windows that meet the technical requirements (a = 0.6 to 1.0 m3/(m h daPa2/3)) covers on average only about 12% and about 21% of the ventilation needs. Without installing additional vents in the rooms, or better yet, installing mechanical ventilation with heat recovery, meeting the ventilation norm requirements will be impossible.

Evaluation and use of airspaces for thermal resistance in buildings

The thermal resistance (R-value) of airspaces depends on the emittance of surfaces around the airspace, dimensions, heat-flow direction, and the temperatures of bounding surfaces. Assessing the energy performance of building envelope components and fenestration systems requires accurate results for the R-values of any enclosed spaces. The evaluation of reflective insulation R-values has evolved to include use of computational fluid dynamics and surface-to-surface radiation to quantify convective and radiation contributions to the heat transfer across airspaces of all types. This paper compares an advanced and validated computational tool for calculating enclosed airspace R-values with the widely-used ISO 6946 and airspace R-values in the ASHRAE Handbook-Fundamentals. The tool evaluates construction defects, air-infiltration impact, and dimensional aspect ratios that 1-D methods do not address. The differences between the methods that are currently being used to evaluate the R-value and the advantages of the advanced method for evaluation of reflective insulation applications are discussed.

Use of Beta Regression to investigate the link between home air infiltration rate and self-reported health

The UK has introduced ambitious legislation for reaching net zero greenhouse gas (GHG) emissions by 2050. Improving the energy efficiency of homes is a key priority in achieving this target and solutions include minimising unwanted heat losses and decarbonising heating and cooling. Making a dwelling more airtight and applying insulation can result in a lower energy demand by reducing unwanted heat loss through fabric and openings. However, the supply of sufficient outdoor air is required to dilute indoor airborne pollutants. This research investigates the relationship between dwelling air infiltration and self-reported health at population neighbourhood level for Greater London. This paper links data from a variety of sources including Energy Performance Certificates (EPCs), the Greater London Authorities’ Large Super Output Area (LSOA) Atlas and the Access to Healthy Assets and Hazards (AHAH) database at LSOA level. Beta regression has been performed to assess the influence of air infiltration rate on self-reported health, whilst controlling for other socioeconomic factors. All factors have been ranked in order of their association with self-reported health. Findings indicate that air infiltration rate has a positive association with the percentage of people reporting themselves to be in “good or very good” health.

The retrofit of ‘70s office buildings curtain walls in London

The built environment accounts for 44% of UK emissions, of which 18% are from non-domestic buildings. Considering that a façade's performance accounts for more than 50% of the energy consumption of a building, the retrofit of a ‘70s curtain wall system is analysed along with common issues such as poor insulation, fire risk, air infiltration and absence of natural ventilation, all of which are known to affect both occupants’ comfort and energy demand negatively. The methodology includes thermal and energy analysis of the Euston tower, results from which are used to inform an analytical model representing a more extensive building stock. Orientation, occupation, window to wall ratio and floor heights are examined as the main factors influencing heat gains, and different passive design solutions are tested to reduce them. Combining these passive design strategies shows a reduction of cooling demand by up to 91% and overheating hours down to 0% from base case to best case, demonstrating how the retrofit of curtain walls in office buildings is essential to cut emissions, reducing energy demand and improving comfort and productivity.

Evaluating methods for estimating whole house air infiltration rates in summer: implications for overheating and indoor air quality

PurposeAccurate values for infiltration rate are important to reliably estimate heat losses from buildings. Infiltration rate is rarely measured directly, and instead is usually estimated using algorithms or data from fan pressurisation tests. However, there is growing evidence that the commonly used methods for estimating infiltration rate are inaccurate in UK dwellings. Furthermore, most prior research was conducted during the winter season or relies on single measurements in each dwelling. Infiltration rates also affect the likelihood and severity of summertime overheating. The purpose of this work is to measure infiltration rates in summer, to compare this to different infiltration estimation methods, and to quantify the differences.Design/methodology/approachFifteen whole house tracer gas tests were undertaken in the same test house during spring and summer to measure the whole building infiltration rate. Eleven infiltration estimation methods were used to predict infiltration rate, and these were compared to the measured values. Most, but not all, infiltration estimation methods relied on data from fan pressurisation (blower door) tests. A further four tracer gas tests were also done with trickle vents open to allow for comment on indoor air quality, but not compared to infiltration estimation methods.FindingsThe eleven estimation methods predicted infiltration rates between 64 and 208% higher than measured. The ASHRAE Enhanced derived infiltration rate (0.41 ach) was closest to the measured value of 0.25 ach, but still significantly different. The infiltration rate predicted by the “divide-by-20” rule of thumb, which is commonly used in the UK, was second furthest from the measured value at 0.73 ach. Indoor air quality is likely to be unsatisfactory in summer when windows are closed, even if trickle vents are open.Practical implicationsThe findings have implications for those using dynamic thermal modelling to predict summertime overheating who, in the absence of a directly measured value for infiltration rate (i.e. by tracer gas), currently commonly use infiltration estimation methods such as the “divide-by-20” rule. Therefore, infiltration may be overestimated resulting in overheating risk and indoor air quality being incorrectly predicted.Originality/valueDirect measurement of air infiltration rate is rare, especially multiple tests in a single home. Past measurements have invariably focused on the winter heating season. This work is original in that the tracer gas technique used to measure infiltration rate many times in a single dwelling during the summer. This work is also original in that it quantifies both the infiltration rate and its variability, and compares these to values produced by eleven infiltration estimation methods.