scholarly journals Fabrication of Parylene-Coated Microneedle Array Electrode for Wearable ECG Device

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5183
Author(s):  
Afraiz Tariq Satti ◽  
Jinsoo Park ◽  
Jangwoong Park ◽  
Hansang Kim ◽  
Sungbo Cho
Keyword(s):  
Silver Chloride ◽  
Equivalent Circuit Model ◽  
Electrode Array ◽  
Motion Artifacts ◽  
Microneedle Array ◽  
Ecg Monitoring ◽  
Insertion Force ◽  
Movement Artifacts ◽  
Silver Silver ◽  
Silver Silver Chloride

Microneedle array electrodes (MNE) showed immense potential for the sensitive monitoring of the bioelectric signals by penetrating the stratum corneum with high electrical impedance. In this paper, we introduce a rigid parylene coated microneedle electrode array and portable electrocardiography (ECG) circuit for monitoring of ECG reducing the motion artifacts. The developed MNE showed stability and durability for dynamic and long-term ECG monitoring in comparison to the typical silver-silver chloride (Ag/AgCl) wet electrodes. The microneedles showed no mechanical failure under the compression force up-to 16 N, but successful penetration of skin tissue with a low insertion force of 5 N. The electrical characteristics of the fabricated MNE were characterized by impedance spectroscopy with equivalent circuit model. The designed wearable wireless ECG monitoring device with MNE proved feasibility of the ECG recording which reduces the noise of movement artifacts during dynamic behaviors.

scholarly journals Development of Washable Silver Printed Textile Electrodes for Long-Term ECG Monitoring

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6233
Author(s):  
Abreha Bayrau Nigusse ◽  
Benny Malengier ◽  
Desalegn Alemu Mengistie ◽  
Granch Berhe Tseghai ◽  
Lieva Van Langenhove
Keyword(s):  
Silver Chloride ◽  
Signal To Noise Ratio ◽  
Polyester Fabric ◽  
Signal Quality ◽  
Ecg Monitoring ◽  
Textile Electrodes ◽  
Elastic Strap ◽  
Silver Silver ◽  
Silver Silver Chloride

Long-term electrocardiography (ECG) monitoring is very essential for the early detection and treatment of cardiovascular disorders. However, commercially used silver/silver chloride (Ag/AgCl) electrodes have drawbacks, and these become more obvious during long-term signal monitoring, making them inconvenient for this use. In this study, we developed silver printed textile electrodes from knitted cotton and polyester fabric for ECG monitoring. The surface resistance of printed electrodes was 1.64 Ω/sq for cotton and 1.78 Ω/sq for polyester electrodes. The ECG detection performance of the electrodes was studied by placing three electrodes around the wrist where the electrodes were embedded on an elastic strap with Velcro. The ECG signals collected using textile electrodes had a comparable waveform to those acquired using standard Ag/AgCl electrodes with a signal to noise ratio (SNR) of 33.10, 30.17, and 33.52 dB for signals collected from cotton, polyester, and Ag/AgCl electrodes, respectively. The signal quality increased as the tightness of the elastic strap increased. Signals acquired at 15 mmHg pressure level with the textile electrodes provided a similar quality to those acquired using standard electrodes. Interestingly, the textile electrodes gave acceptable signal quality even after ten washing cycles.

Construction of a very high-density extracellular electrode array

2000 ◽  
Vol 279 (1) ◽  
pp. H437-H442 ◽  
Author(s):  
Robert A. Malkin ◽  
Bradford D. Pendley
Keyword(s):  
Silver Chloride ◽  
Electrode Array ◽  
Active Surface ◽  
Potential Difference ◽  
Electrode Spacing ◽  
Construction Technique ◽  
Silver Silver ◽  
Silver Silver Chloride ◽  
Chloride Coating ◽  
Activation Mapping

Cellular activation mapping (specifying in time and space the electrical activation sequence of cells) is a well-established basic research tool in cardiac, neural, and gastric physiology. Much recent research in cardiac mapping has focused on large arrays (>200 electrodes) with small electrodes (<500 μm). Construction of such arrays using standard techniques is tedious and yields irregular electrode spacing. We present a novel construction technique that rapidly produces large arrays with regularly spaced small electrodes. For methods, fine-pitch copper ribbon cables, insulated with either polyvinylchloride (PVC) or polyimide (flexible printed circuit; FPC), were assembled together such that the active surface was the cut end of the cable. The cut end was sanded and polished, then coated with silver and sometimes silver chloride. Once completed, the alternating current (AC) root-mean-square (rms) potential was measured between two adjacent, individual electrodes. Polarization testing was conducted according to a previously reported protocol (Witkowski FX and Penkoske PA. J Electrocardiol 21: 273–282, 1988). Activation mapping was conducted in the open-chest guinea pig with both pacing- and defibrillation- strength stimuli. In terms of results, four PVC and three FPC arrays were constructed, ranging from 4 to 400 electrodes. Two hours of labor were needed to create a complete electrode array, independent of the number of electrodes, including connectors and silver/silver chloride coating. As expected, the addition of a silver/silver chloride coating significantly reduced (0.76–0.42 mV, P < 0.001) the AC rms potential difference between two electrodes. A nearly immediate recovery of the potential difference between adjacent pairs of silver/silver chloride electrodes was observed after defibrillation stimuli.

scholarly journals A Novel Highly Durable Carbon/Silver/Silver Chloride Composite Electrode for High-Definition Transcranial Direct Current Stimulation

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1962
Author(s):  
Lingjun Li ◽  
Guangli Li ◽  
Yuliang Cao ◽  
Yvonne Yanwen Duan
Keyword(s):  
Service Life ◽  
Direct Current ◽  
Transcranial Direct Current Stimulation ◽  
Silver Chloride ◽  
Cycling Performance ◽  
High Definition ◽  
Silver Silver ◽  
Sintered Ag ◽  
Silver Silver Chloride

High-definition transcranial direct current stimulation (HD-tDCS) is a promising non-invasive neuromodulation technique, which has been widely used in the clinical intervention and treatment of neurological or psychiatric disorders. Sintered Ag/AgCl electrode has become a preferred candidate for HD-tDCS, but its service life is very short, especially for long-term anodal stimulation. To address this issue, a novel highly durable conductive carbon/silver/silver chloride composite (C/Ag/AgCl) electrode was fabricated by a facile cold rolling method. The important parameters were systematically optimized, including the conductive enhancer, the particle size of Ag powder, the C:Ag:PTFE ratio, the saline concentration, and the active substance loading. The CNT/Ag/AgCl-721 electrode demonstrated excellent specific capacity and cycling performance. Both constant current anodal polarization and simulated tDCS measurement demonstrated that the service life of the CNT/Ag/AgCl-721 electrodes was 15-16 times of that of sintered Ag/AgCl electrodes. The much longer service life can be attributed to the formation of the three-dimensional interpenetrating conductive network with CNT doping, which can maintain a good conductivity and cycling performance even if excessive non-conductive AgCl is accumulated on the surface during long-term anodal stimulation. Considering their low cost, long service life, and good skin tolerance, the proposed CNT/Ag/AgCl electrodes have shown promising application prospects in HD-tDCS, especially for daily life scenarios.

Sign in / Sign up

Export Citation Format

Share Document