scholarly journals Performance Analysis of Scattering-Level Multiplexing (SLMux) in Distributed Fiber-Optic Backscatter Reflectometry Physical Sensors

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2595 ◽  
Author(s):  
Daniele Tosi ◽  
Carlo Molardi ◽  
Wilfried Blanc ◽  
Tiago Paixão ◽  
Paulo Antunes ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Rayleigh Scattering ◽  
Fiber Optic ◽  
Single Fiber ◽  
Distributed Sensor ◽  
The Core ◽  
Physical Sensors ◽  
Core Section ◽  
Boundary Limits ◽  
Multiple Fibers

Optical backscatter reflectometry (OBR) is a method for the interrogation of Rayleigh scattering occurring in each section of an optical fiber, resulting in a single-fiber-distributed sensor with sub-millimeter spatial resolution. The use of high-scattering fibers, doped with MgO-based nanoparticles in the core section, provides a scattering increase which can overcome 40 dB. Using a configuration-labeled Scattering-Level Multiplexing (SLMux), we can arrange a network of high-scattering fibers to perform a simultaneous scan of multiple fiber sections, therefore extending the OBR method from a single fiber to multiple fibers. In this work, we analyze the performance and boundary limits of SLMux, drawing the limits of detection of N-channel SLMux, and evaluating the performance of scattering-enhancement methods in optical fibers.

scholarly journals Comparison among Different Fiber Coatings on the Concrete Shrinkage Test for Distributed Optical Strain Measurements based on Rayleigh Backscattering

2019 ◽  
Author(s):  
Martin Weisbrich ◽  
Klaus Holschemacher ◽  
Thomas Bier
Keyword(s):  
Optical Fibers ◽  
Strain Measurement ◽  
Rayleigh Scattering ◽  
Fiber Optic ◽  
Reference Method ◽  
Shrinkage Strain ◽  
Rayleigh Backscattering ◽  
Advantages And Disadvantages ◽  
Optical Strain ◽  
Fiber Coatings

The fiber optic strain measurement based on Rayleigh scattering has recently become increasingly popular in automotive or mechanical engineering for strain monitoring and in the construction industry in general, especially structural health monitoring. This technology enables the monitoring of strain along the entire fiber length. Several publications have been published, particularly on the applications to the structural component. This article addresses integrating optical fibers of different coatings into the concrete matrix to measure the shrinkage deformations. In this context, three different coating types were investigated regarding their strain transfer. The fibers were integrated into fine-grained concrete prisms, and the shrinkage strain was compared with a precise dial gauge. The analysis shows a high correlation between the reference method and the fiber measurement, especially with the Ormocer coating. The used acrylate coating is also consistent in the middle area of the specimen but requires a certain strain introduction length to indicate the actual strain. The main result of this study is a recommendation for fiber coatings for shrinkage measurement in fine grain concretes using the distributed fiber optic strain measurement. In addition, the advantages and disadvantages of the measurement method are presented.

scholarly journals Comparison of different fiber coatings for distributed strain measurement in cementitious matrices

2020 ◽  
Vol 9 (2) ◽  
pp. 189-197
Author(s):  
Martin Weisbrich ◽  
Klaus Holschemacher ◽  
Thomas Bier
Keyword(s):  
Optical Fibers ◽  
Strain Measurement ◽  
Rayleigh Scattering ◽  
Fiber Optic ◽  
Reference Method ◽  
Shrinkage Strain ◽  
Strain Transfer ◽  
Advantages And Disadvantages ◽  
Fine Grain ◽  
Fiber Coatings

Abstract. Distributed fiber optic strain measurement based on Rayleigh scattering has recently become increasingly popular in automotive and mechanical engineering for strain monitoring and in the construction industry, especially structural health monitoring. This technology enables the monitoring of strain along the entire fiber length. This article addresses integrating optical fibers of different coatings into the concrete matrix to measure the shrinkage deformations. However, previous studies do not give a clear statement about the strain transfer losses of fiber optic sensors in this application. In this context, three different coating types were investigated regarding their strain transfer. The fibers were integrated into fine-grained concrete prisms, and the shrinkage strain was compared with a precise dial gauge. The analysis shows a high correlation between the reference method and the fiber measurement, especially with the ORMOCER® coating. The acrylate coating used is also consistent in the middle area of the specimen but requires a certain strain introduction length to indicate the actual strain. The main result of this study is a recommendation for fiber coatings for shrinkage measurement in fine-grain concretes using the distributed fiber optic strain measurement. In addition, the advantages and disadvantages of the measurement method are presented.

scholarly journals Dispersion Features of Conducting Sheath Helix Embedded Elliptical and Circular Fibers with Chiral Nihility Core

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
N. Iqbal ◽  
M. A. Baqir ◽  
P. K. Choudhury
Keyword(s):  
Wave Propagation ◽  
Optical Fibers ◽  
Cross Sections ◽  
Pitch Angle ◽  
Electromagnetic Wave Propagation ◽  
Dielectric Dispersion ◽  
The Core ◽  
Helix Pitch ◽  
Core Section ◽  
Analysis Of Dispersion

Discussions have been made of the electromagnetic wave propagation through optical fibers of elliptical and circular cross-sections with the loadings of conducting sheath helix at the core-clad interface with particular orientations. In both geometrical situations, the core section of fiber is assumed to be composed of chiral nihility medium, and the clad remains linear, homogeneous, isotropic, and nonmagnetic dielectric. Dispersion relations are deduced for both fiber structures, followed by the analysis of dispersion features considering a few low-order EH modes. Furthermore, the effects of conducting helix pitch angle on the features of wave propagation are also discussed.

scholarly journals Comparison of Different Fiber Coatings for Distributed Strain Measurement in Cementitious Matrices

2020 ◽  
Author(s):  
Martin Weisbrich ◽  
Klaus Holschemacher ◽  
Thomas Bier
Keyword(s):  
Optical Fibers ◽  
Strain Measurement ◽  
Rayleigh Scattering ◽  
Fiber Optic ◽  
Reference Method ◽  
Shrinkage Strain ◽  
Strain Transfer ◽  
Advantages And Disadvantages ◽  
Fine Grain ◽  
Fiber Coatings

The distributed fiber optic strain measurement based on Rayleigh scattering has recently become increasingly popular in automotive or mechanical engineering for strain monitoring and in the construction industry, especially structural health monitoring. This technology enables the monitoring of strain along the entire fiber length. This article addresses integrating optical fibers of different coatings into the concrete matrix to measure the shrinkage deformations. However, previous studies do not give a clear statement about the strain transfer losses of fiber optic sensors in this application. In this context, three different coating types were investigated regarding their strain transfer. The fibers were integrated into fine-grained concrete prisms, and the shrinkage strain was compared with a precise dial gauge. The analysis shows a high correlation between the reference method and the fiber measurement, especially with the Ormocer coating. The used acrylate coating is also consistent in the middle area of the specimen but requires a certain strain introduction length to indicate the actual strain. The main result of this study is a recommendation for fiber coatings for shrinkage measurement in fine-grain concretes using the distributed fiber optic strain measurement. In addition, the advantages and disadvantages of the measurement method are presented.

High-voltage monitoring by the fiber-optic recirculating measuring system

2020 ◽  
pp. 38-44
Author(s):  
A. V. Polyakov ◽  
M. A. Ksenofontov
Keyword(s):  
Optical Fibers ◽  
High Voltage ◽  
Optical Sensors ◽  
Electromagnetic Interference ◽  
Fiber Optic ◽  
Electric Power Industry ◽  
Measuring System ◽  
Voltage Range ◽  
External Electromagnetic Fields ◽  
Optic Communication

Optical technologies for measuring electrical quantities attract great attention due to their unique properties and significant advantages over other technologies used in high-voltage electric power industry: the use of optical fibers ensures high stability of measuring equipment to electromagnetic interference and galvanic isolation of high-voltage sensors; external electromagnetic fields do not influence the data transmitted from optical sensors via fiber-optic communication lines; problems associated with ground loops are eliminated, there are no side electromagnetic radiation and crosstalk between the channels. The structure and operation principle of a quasi-distributed fiber-optic high-voltage monitoring system is presented. The sensitive element is a combination of a piezo-ceramic tube with an optical fiber wound around it. The device uses reverse transverse piezoelectric effect. The measurement principle is based on recording the change in the recirculation frequency under the applied voltage influence. When the measuring sections are arranged in ascending order of the measured effective voltages relative to the receiving-transmitting unit, a relative resolution of 0,3–0,45 % is achieved for the PZT-5H and 0,8–1,2 % for the PZT-4 in the voltage range 20–150 kV.

scholarly journals Sensing, Actuation, and Control of the SmartX Prototype Morphing Wing in the Wind Tunnel

Actuators ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 107
Author(s):  
Nakash Nazeer ◽  
Xuerui Wang ◽  
Roger M. Groves
Keyword(s):  
Wind Tunnel ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Experimental Testing ◽  
Single Mode ◽  
Fiber Optic Sensor ◽  
Sensor Data ◽  
Random Errors ◽  
Morphing Wing ◽  
Actuator Dynamics

This paper presents a study on trailing edge deflection estimation for the SmartX camber morphing wing demonstrator. This demonstrator integrates the technologies of smart sensing, smart actuation and smart controls using a six module distributed morphing concept. The morphing sequence is brought about by two actuators present at both ends of each of the morphing modules. The deflection estimation is carried out by interrogating optical fibers that are bonded on to the wing’s inner surface. A novel application is demonstrated using this method that utilizes the least amount of sensors for load monitoring purposes. The fiber optic sensor data is used to measure the deflections of the modules in the wind tunnel using a multi-modal fiber optic sensing approach and is compared to the deflections estimated by the actuators. Each module is probed by single-mode optical fibers that contain just four grating sensors and consider both bending and torsional deformations. The fiber optic method in this work combines the principles of hybrid interferometry and FBG spectral sensing. The analysis involves an initial calibration procedure outside the wind tunnel followed by experimental testing in the wind tunnel. This method is shown to experimentally achieve an accuracy of 2.8 mm deflection with an error of 9%. The error sources, including actuator dynamics, random errors, and nonlinear mechanical backlash, are identified and discussed.

scholarly journals Distributed Static and Dynamic Strain Measurements in Polymer Optical Fibers by Rayleigh Scattering

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5049
Author(s):  
Agnese Coscetta ◽  
Ester Catalano ◽  
Enis Cerri ◽  
Ricardo Oliveira ◽  
Lucia Bilro ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Time Domain ◽  
Rayleigh Scattering ◽  
Cost Effective ◽  
Time Domain Reflectometry ◽  
Dynamic Strain ◽  
Strain Measurements ◽  
Graded Index ◽  
Optical Time ◽  
Polymer Optical Fibers

We demonstrate the use of a graded-index perfluorinated optical fiber (GI-POF) for distributed static and dynamic strain measurements based on Rayleigh scattering. The system is based on an amplitude-based phase-sensitive Optical Time-Domain Reflectometry (ϕ-OTDR) configuration, operated at the unconventional wavelength of 850 nm. Static strain measurements have been carried out at a spatial resolution of 4 m and for a strain up to 3.5% by exploiting the increase of the backscatter Rayleigh coefficient consequent to the application of a tensile strain, while vibration/acoustic measurements have been demonstrated for a sampling frequency up to 833 Hz by exploiting the vibration-induced changes in the backscatter Rayleigh intensity time-domain traces arising from coherent interference within the pulse. The reported tests demonstrate that polymer optical fibers can be used for cost-effective multiparameter sensing.

scholarly journals Novel Bloch wave excitation platform based on few-layer photonic crystal deposited on D-shaped optical fiber

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Esteban Gonzalez-Valencia ◽  
Ignacio Del Villar ◽  
Pedro Torres
Keyword(s):  
Optical Fibers ◽  
High Performance ◽  
Light Propagation ◽  
Fiber Optic ◽  
Layer Structure ◽  
Optical Network ◽  
Building Blocks ◽  
Bloch Wave ◽  
Nanophotonic Devices ◽  
Wide Range

AbstractWith the goal of ultimate control over the light propagation, photonic crystals currently represent the primary building blocks for novel nanophotonic devices. Bloch surface waves (BSWs) in periodic dielectric multilayer structures with a surface defect is a well-known phenomenon, which implies new opportunities for controlling the light propagation and has many applications in the physical and biological science. However, most of the reported structures based on BSWs require depositing a large number of alternating layers or exploiting a large refractive index (RI) contrast between the materials constituting the multilayer structure, thereby increasing the complexity and costs of manufacturing. The combination of fiber–optic-based platforms with nanotechnology is opening the opportunity for the development of high-performance photonic devices that enhance the light-matter interaction in a strong way compared to other optical platforms. Here, we report a BSW-supporting platform that uses geometrically modified commercial optical fibers such as D-shaped optical fibers, where a few-layer structure is deposited on its flat surface using metal oxides with a moderate difference in RI. In this novel fiber optic platform, BSWs are excited through the evanescent field of the core-guided fundamental mode, which indicates that the structure proposed here can be used as a sensing probe, along with other intrinsic properties of fiber optic sensors, as lightness, multiplexing capacity and easiness of integration in an optical network. As a demonstration, fiber optic BSW excitation is shown to be suitable for measuring RI variations. The designed structure is easy to manufacture and could be adapted to a wide range of applications in the fields of telecommunications, environment, health, and material characterization.

Single fiber-optic fluorescence enzyme-based sensor

1988 ◽  
Vol 60 (5) ◽  
pp. 433-435 ◽  
Author(s):  
Ming Ren S. Fuh ◽  
Lloyd W. Burgess ◽  
Gary D. Christian
Keyword(s):  
Fiber Optic ◽  
Single Fiber
Sign in / Sign up

Export Citation Format

Share Document