scholarly journals A Radio Channel Model for D2D Communications Blocked by Single Trees in Forest Environments

Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4606 ◽  
Author(s):  
Imanol Picallo ◽  
Hicham Klaina ◽  
Peio Lopez-Iturri ◽  
Erik Aguirre ◽  
Mikel Celaya-Echarri ◽  
...  
Keyword(s):  
Channel Model ◽  
Radio Channel ◽  
Path Loss ◽  
Simulation Software ◽  
Delay Spread ◽  
Zone Model ◽  
Isolated Trees ◽  
Pine Trees ◽  
Distance Model ◽  
Recreation Area

In this paper we consider the D2D (Device-to-Device) communication taking place between Wireless Sensor Networks (WSN) elements operating in vegetation environments in order to achieve the radio channel characterization at 2.4 GHz, focusing on the radio links blocked by oak and pine trees modelled from specimens found in a real recreation area located within forest environments. In order to fit and validate a radio channel model for this type of scenarios, both measurements and simulations by means of an in-house developed 3D Ray Launching algorithm have been performed, offering as outcomes the path loss and multipath information of the scenarios under study for forest immersed isolated trees and non-isolated trees. The specific forests, composed of thick in-leaf trees, are called Orgi Forest and Chandebrito, located respectively in Navarre and Galicia, Spain. A geometrical and dielectric model of the trees were created and introduced in the simulation software. We concluded that the scattering produced by the tree can be divided into two zones with different dominant propagation mechanisms: an obstructed line of sight (OLoS) zone far from the tree fitting a log-distance model, and a diffraction zone around the edge of the tree. 2D planes of delay spread value are also presented which similarly reflects the proposed two-zone model.

scholarly journals Radio Channel Characterization in Dense Forest Environments for IoT-5G

Proceedings ◽  
2018 ◽  
Vol 4 (1) ◽  
pp. 19
Author(s):  
Peio Lopez-Iturri ◽  
Erik Aguirre ◽  
Mikel Celaya-Echarri ◽  
Leyre Azpilicueta ◽  
Alejandro Eguizábal ◽  
...  
Keyword(s):  
Communication Systems ◽  
Channel Model ◽  
Multipath Propagation ◽  
Radio Channel ◽  
Path Loss ◽  
Simulation Software ◽  
Delay Spread ◽  
Radio Link ◽  
Zone Model ◽  
Dense Forest

The attenuation due to vegetation can limit drastically the performance of Wireless Sensor Networks (WSN) and the Internet of Things (IoT) communication systems. Even more for the envisaged high data rates expected for the upcoming 5G mobile wireless communications. In this context, radio planning tasks become necessary in order to assess the validity of future WSN and IoT systems operating in vegetation environments. For that purpose, path loss models for scenarios with vegetation play a key role since they provide RF power estimations that allow an optimized design and performance of the wireless network. Although different propagation models for vegetation obstacles can be found in the literature, a model combining path loss and multipath propagation is rarely considered. In this contribution, we present the characterization of the radio channel for IoT and 5G systems working at 2.4 GHz, focusing on the radio links blocked by oak and pine trees modelled from specimens found in a real recreation area located within a dense forest environment. This specific forest, composed of thick in-leaf trees, is called Orgi Forest and it is situated in Navarre, Spain. In order to fit and validate a radio channel model for this type of scenarios, both measurements and simulations by means of an in-house developed 3D Ray Launching algorithm have been performed, offers as outcomes the path loss and multipath information of the scenario under study. A geometrical and dielectric model of the trees were created and introduced in the simulation software. The path loss was then estimated as dependent of the radio link range for two species of trees at 2.4 GHz. We concluded that the scattering produced by the tree can be divided into two zones with different dominant propagation mechanisms: a free-space zone far from the tree and a diffraction zone around the edge of the tree. 2D planes of delay spread value are also presented which similarly reflects the proposed two-zone model.

scholarly journals Broadband Wireless Channel in Composite High-Speed Railway Scenario: Measurements, Simulation, and Analysis

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Jianwen Ding ◽  
Lei Zhang ◽  
Jingya Yang ◽  
Bin Sun ◽  
Jiying Huang
Keyword(s):  
Ray Tracing ◽  
Communication Systems ◽  
High Speed ◽  
Channel Model ◽  
High Reliability ◽  
Rapid Development ◽  
Path Loss ◽  
Wireless Channel ◽  
Delay Spread ◽  
High Speed Railway

The rapid development of high-speed railway (HSR) and train-ground communications with high reliability, safety, and capacity promotes the evolution of railway dedicated mobile communication systems from Global System for Mobile Communications-Railway (GSM-R) to Long Term Evolution-Railway (LTE-R). The main challenges for LTE-R network planning are the rapidly time-varying channel and high mobility, because HSR lines consist of a variety of complex terrains, especially the composite scenarios where tunnels, cuttings, and viaducts are connected together within a short distance. Existing researches mainly focus on the path loss and delay spread for the individual HSR scenarios. In this paper, the broadband measurements are performed using a channel sounder at 950 MHz and 2150 MHz in a typical HSR composite scenario. Based on the measurements, the pivotal characteristics are analyzed for path loss exponent, power delay profile, and tap delay line model. Then, the deterministic channel model in which the 3D ray-tracing algorithm is applied in the composite scenario is presented and validated by the measurement data. Based on the ray-tracing simulations, statistical analysis of channel characteristics in delay and Doppler domain is carried out for the HSR composite scenario. The research results can be useful for radio interface design and optimization of LTE-R system.

scholarly journals Empirical Path Loss Channel Characterization Based on Air-to-Air Ground Reflection Channel Modeling for UAV-Enabled Wireless Communications

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jatuporn Supramongkonset ◽  
Sarun Duangsuwan ◽  
Myo Myint Maw ◽  
Sathaporn Promwong
Keyword(s):  
Wireless Communications ◽  
Wireless Communication ◽  
Channel Model ◽  
Measurement Data ◽  
Path Loss ◽  
Channel Modeling ◽  
Channel Characterization ◽  
Distance Model ◽  
Aerial Vehicle ◽  
The Impact

The purpose of this work was to investigate the air-to-air channel model (A2A-CM) for unmanned aerial vehicle- (UAV-) enabled wireless communications. Specifically, a low-altitude small UAV needs to characterize the propagation mechanisms from ground reflection. In this paper, the empirical path loss channel characterizations of A2A ground reflection CM based on different scenarios were presented by comparing the wireless communication modules for UAVs. Two types of wireless communication modules both WiFi 2.4 GHz and LoRa 868 MHz frequency were deployed to study the path loss channel characterization between Tx-UAV and Rx-UAV. To investigate the path loss, three types of experimental channel models, such as CM1 grass floor, CM2 soil floor, and CM3 rubber floor, were considered under the ground reflection condition. The analytical A2A Two-Ray (A2AT-R) model and the modified Log-Distance model were simulated to compare the correlation with the measurement data. The measurement results in the CM3 rubber floor scenario showed the impact from the ground reflection at 1 m to 3 m Rx-UAV altitudes both 2.4 GHz and 868 MHz which was converged to the A2AT-R model and related to the modified Log-Distance model above 3 m. It clear that there is no ground reflection effect from the CM1 grass floor and CM2 soil floor. This work showed that the analytical A2AT-R model and the modified Log-Distance model can deploy to model the path loss of A2A-CM by using WiFi and LoRa wireless modules.

scholarly journals Ray-Based Statistical Propagation Modeling for Indoor Corridor Scenarios at 15 GHz

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Qi Wang ◽  
Bo Ai ◽  
Ke Guan ◽  
David W. Matolak ◽  
Ruisi He ◽  
...  
Keyword(s):  
Communication Systems ◽  
Channel Model ◽  
Deterministic Model ◽  
Path Loss ◽  
Propagation Characteristic ◽  
Directional Antennas ◽  
Small Scale ◽  
Delay Spread ◽  
Channel Measurements ◽  
The Impact

According to the demands for fifth-generation (5G) communication systems, high frequency bands (above 6 GHz) need to be adopted to provide additional spectrum. This paper investigates the characteristics of indoor corridor channels at 15 GHz. Channel measurements with a vector network analyzer in two corridors were conducted. Based on a ray-optical approach, a deterministic channel model covering both antenna and propagation characteristic is presented. The channel model is evaluated by comparing simulated results of received power and root mean square delay spread with the corresponding measurements. By removing the impact of directional antennas from the transmitter and receiver, a path loss model as well as small-scale fading properties for typical corridors is presented based on the generated samples from the deterministic model. Results show that the standard deviation of path loss variation is related to the Tx height, and placing the Tx closer to the ceiling leads to a smaller fluctuation of path loss.

scholarly journals Wideband Channel Characterization for 6G Networks in Industrial Environments

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2015
Author(s):  
Ahmed Al-Saman ◽  
Marshed Mohamed ◽  
Michael Cheffena ◽  
Arild Moldsvor
Keyword(s):  
Radio Channel ◽  
Path Loss ◽  
Data Rate ◽  
Delay Spread ◽  
Channel Measurements ◽  
Data Traffic ◽  
Dispersion Parameters ◽  
Time Dispersion ◽  
K Factor ◽  
Industrial Environments

Wireless data traffic has increased significantly due to the rapid growth of smart terminals and evolving real-time technologies. With the dramatic growth of data traffic, the existing cellular networks including Fifth-Generation (5G) networks cannot fully meet the increasingly rising data rate requirements. The Sixth-Generation (6G) mobile network is expected to achieve the high data rate requirements of new transmission technologies and spectrum. This paper presents the radio channel measurements to study the channel characteristics of 6G networks in the 107–109 GHz band in three different industrial environments. The path loss, K-factor, and time dispersion parameters are investigated. Two popular path loss models for indoor environments, the close-in free space reference distance (CI) and floating intercept (FI), are used to examine the path loss. The mean excess delay (MED) and root mean squared delay spread (RMSDS) are used to investigate the time dispersion of the channel. The path loss results show that the CI and FI models fit the measured data well in all industrial settings with a path loss exponent (PLE) of 1.6–2. The results of the K-factor show that the high value in industrial environments at the sub-6 GHz band still holds well in our measured environments at a high frequency band above 100 GHz. For the time dispersion parameters, it is found that most of the received signal energy falls in the early delay bins. This work represents a first step to establish the feasibility of using 6G networks operating above 100 GHz for industrial applications.

scholarly journals Vehicular Channel in Urban Environments at 23 GHz for Flexible Access Common Spectrum Application

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Longhe Wang ◽  
Bo Ai ◽  
Jingya Yang ◽  
Hao Qiu ◽  
Wanqiao Wang ◽  
...  
Keyword(s):  
Mobile Networks ◽  
Dynamic Spectrum Access ◽  
Radio Channel ◽  
Path Loss ◽  
Radio Spectrum ◽  
Urban Environments ◽  
Delay Spread ◽  
Access Technology ◽  
Rms Delay Spread ◽  
New Radio

With the development of the vehicular network, new radio technologies have been in the spotlight for maximizing the utilization of the limited radio spectrum resource while accommodating the increasing amount of services and applications in the wireless mobile networks. New spectrum policies based on dynamic spectrum access technology such as flexible access common spectrum (FACS) have been adopted by the Korea Communications Commission (KCC). 23 GHz bands have been allocated to FACS bands by the KCC, which is expected extensively for vehicular communications. The comprehensive knowledge on the radio channel is essential to effectively support the design, simulation, and development of such radio technologies. In this paper, the characteristics of 23 GHz vehicle-to-infrastructure (V2I) channels are simulated and extracted for the urban environment in Seoul. The path loss, shadow factor, Ricean K-factor, root-mean-square (RMS) delay spread, and angular spreads are characterized from the calibrated ray-tracing simulation results, and it can help researchers have a better understanding of the propagation channel for designing vehicular radio technologies and a communication system in a similar environment.

scholarly journals Narrowband Characterization of Near-Ground Radio Channel for Wireless Sensors Networks at 5G-IoT Bands

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2428 ◽  
Author(s):  
Hicham Klaina ◽  
Ana Vazquez Alejos ◽  
Otman Aghzout ◽  
Francisco Falcone
Keyword(s):  
Channel Model ◽  
Fresnel Zone ◽  
Radio Channel ◽  
Path Loss ◽  
Link Quality ◽  
Sensor Nodes ◽  
Radio Link ◽  
Tall Grass ◽  
Received Power ◽  
Log Normal

In this contribution, a narrowband radio channel model is proposed for rural scenarios in which the radio link operates under near-ground conditions for application in wireless sensor networks dedicated to smart agriculture. The received power attenuation was measured for both transmitter and receiver antennas placed at two different heights above ground: 0.2 and 0.4 m. Three frequency ranges, proposed for future 5G-IoT use case in agriculture, were chosen: 868 MHz, 2.4 GHz and 5.8 GHz. Three ground coverings were tested in a rural scenario: soil, short and tall grass fields. The path loss was then estimated as dependent of the radio link range and a three-slope log-normal path loss model was tailored. Results are explained in terms of the first Fresnel zone obstruction. Commercial Zigbee sensor nodes operating at 2.4 GHz were used in a second experiment to estimate the link quality from the experimental Radio Signal Strength Indicator (RSSI) received values. Two sensor nodes were placed at the same elevation above ground as in the previous experiment, only for short grass field case. The Quality of Service performance was determined in terms of theoretical bit error rate achieved for different digital modulations—BPSK, 8PSK and 16QAM—concluding remarkable results for an obstructed radio link.

scholarly journals Channel Characteristics of Rail Traffic Tunnel Scenarios Based on Ray-Tracing Simulator

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Jinmeng Zhao ◽  
Lei Xiong ◽  
Danping He ◽  
Jiadong Du
Keyword(s):  
Ray Tracing ◽  
Cross Sections ◽  
Radio Channel ◽  
Path Loss ◽  
Vehicle Body ◽  
Delay Spread ◽  
Rms Delay Spread ◽  
Channel Characteristics ◽  
K Factor ◽  
Side Walls

The tunnel scenario is a major rail communication scenario. In this paper, the radio channel characteristics of tunnel scenarios with different carrier frequencies, different distances between the transmitter (Tx) and receiver (Rx), and cross sections are simulated with a ray-tracing tool. Key parameters such as path loss, Rician K-factor, root mean square (RMS) delay spread, and angular spread are studied. According to the results, higher frequencies introduce larger path loss and the presence of the vehicle body increases the path loss by about 35 dB in the scenario; at the same time it will also cause the fluctuation and instability of the path loss. Besides, the influence of reflections from the side walls is significant on radio propagation. The channel experiences more severe fading in a narrow tunnel compared with others.

Characterization of path loss model for wireless communication channel modelling

2020 ◽  
Vol 54 (3) ◽  
pp. 343-364
Author(s):  
Nandakishor Sirdeshpande ◽  
Vishwanath Udupi
Keyword(s):  
Wireless Communication ◽  
Communication Channel ◽  
Channel Model ◽  
Path Loss ◽  
Small Scale ◽  
Delay Spread ◽  
Loss Model ◽  
Content Type ◽  
Path Loss Model ◽  
Scale Parameters

PurposeWireless communication channel provides a wide area of applications in the field of communication, distributed sensor network and so on. The prominence of the wireless communication channel is because of its robust nature and the sustainability for the precise ranging and the localization. The precision and accuracy of the wireless communication channel largely depend on the localization. The development of the wireless communication channel with improved benefits needs the accurate channel model.Design/methodology/approachThis paper characterizes the tangential path loss model in the WINNER based wireless communication channel model. The measurements taken in the WINNER channel model are compared with the tangential path loss characterized WINNER Channel model.FindingsThe model operates well over the varying antenna orientations, measurement condition and the propagation condition. The proposed tangential path loss model is performing well over the various outdoor scenarios.Originality/valueThe proposed characterization shows change in the small-scale parameters (SSP), such as power, delay, angle of arrival and angle of departure as well as the large-scale parameters (LSP), such as RMS delay spread, shadowing, path loss and Ricean factor associated with the model.

Sign in / Sign up

Export Citation Format

Share Document