scholarly journals Silicon-Based Sensors for Biomedical Applications: A Review

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 2908 ◽  
Author(s):  
Yongzhao Xu ◽  
Xiduo Hu ◽  
Sudip Kundu ◽  
Anindya Nag ◽  
Nasrin Afsarimanesh ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Microelectromechanical Systems ◽  
Human Life ◽  
Market Survey ◽  
Biomedical Sensing ◽  
Silicon Sensors ◽  
Mems Technology ◽  
Current Scenario ◽  
Silicon Based

The paper highlights some of the significant works done in the field of medical and biomedical sensing using silicon-based technology. The use of silicon sensors is one of the pivotal and prolonged techniques employed in a range of healthcare, industrial and environmental applications by virtue of its distinct advantages over other counterparts in Microelectromechanical systems (MEMS) technology. Among them, the sensors for biomedical applications are one of the most significant ones, which not only assist in improving the quality of human life but also help in the field of microfabrication by imparting knowledge about how to develop enhanced multifunctional sensing prototypes. The paper emphasises the use of silicon, in different forms, to fabricate electrodes and substrates for the sensors that are to be used for biomedical sensing. The electrical conductivity and the mechanical flexibility of silicon vary to a large extent depending on its use in developing prototypes. The article also explains some of the bottlenecks that need to be dealt with in the current scenario, along with some possible remedies. Finally, a brief market survey is given to estimate a probable increase in the usage of silicon in developing a variety of biomedical prototypes in the upcoming years.

scholarly journals MEMS Technology Sensors as a More Advantageous Technique for Measuring Foot Plantar Pressure and Balance in Humans

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Clara Sanz Morère ◽  
Łukasz Surażyński ◽  
Ana Rodrigo Pérez-Tabernero ◽  
Erkki Vihriälä ◽  
Teemu Myllylä
Keyword(s):  
Plantar Pressure ◽  
Microelectromechanical Systems ◽  
Human Life ◽  
Pressure Sensors ◽  
High Mobility ◽  
Pressure Measurements ◽  
Mems Sensor ◽  
Research Problems ◽  
Mems Technology ◽  
Footwear Design

Locomotor activities are part and parcel of daily human life. During walking or running, feet are subjected to high plantar pressure, leading sometimes to limb problems, pain, or foot ulceration. A current objective in foot plantar pressure measurements is developing sensors that are small in size, lightweight, and energy efficient, while enabling high mobility, particularly for wearable applications. Moreover, improvements in spatial resolution, accuracy, and sensitivity are of interest. Sensors with improved sensing techniques can be applied to a variety of research problems: diagnosing limb problems, footwear design, or injury prevention. This paper reviews commercially available sensors used in foot plantar pressure measurements and proposes the utilization of pressure sensors based on the MEMS (microelectromechanical systems) technique. Pressure sensors based on this technique have the capacity to measure pressure with high accuracy and linearity up to high pressure levels. Moreover, being small in size, they are highly suitable for this type of measurement. We present two MEMS sensor models and study their suitability for the intended purpose by performing several experiments. Preliminary results indicate that the sensors are indeed suitable for measuring foot plantar pressure. Importantly, by measuring pressure continuously, they can also be utilized for body balance measurements.

scholarly journals Fabricating Silicon Resonators for Analysing Biological Samples

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1546
Author(s):  
Momoko Kumemura ◽  
Deniz Pekin ◽  
Vivek Anand Menon ◽  
Isabelle Van Van Seuningen ◽  
Dominique Collard ◽  
...  
Keyword(s):  
Double Layer ◽  
Biological Samples ◽  
Electrical Double Layer ◽  
Biomedical Applications ◽  
Microelectromechanical Systems ◽  
Layer Formation ◽  
Wide Range ◽  
Experimental Approaches ◽  
Silicon Based ◽  
Microelectromechanical Resonators

The adaptability of microscale devices allows microtechnologies to be used for a wide range of applications. Biology and medicine are among those fields that, in recent decades, have applied microtechnologies to achieve new and improved functionality. However, despite their ability to achieve assay sensitivities that rival or exceed conventional standards, silicon-based microelectromechanical systems remain underutilised for biological and biomedical applications. Although microelectromechanical resonators and actuators do not always exhibit optimal performance in liquid due to electrical double layer formation and high damping, these issues have been solved with some innovative fabrication processes or alternative experimental approaches. This paper focuses on several examples of silicon-based resonating devices with a brief look at their fundamental sensing elements and key fabrication steps, as well as current and potential biological/biomedical applications.

scholarly journals 3D Printed Sensors for Biomedical Applications: A Review

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1706 ◽  
Author(s):  
Tao Han ◽  
Sudip Kundu ◽  
Anindya Nag ◽  
Yongzhao Xu
Keyword(s):  
3D Printing ◽  
Biomedical Applications ◽  
Market Survey ◽  
Healthcare Applications ◽  
Biomedical Sensing ◽  
Printed Sensors ◽  
3D Printed ◽  
The Individual ◽  
Work Done ◽  
Printing Techniques

This paper showcases a substantial review on some of the significant work done on 3D printing of sensors for biomedical applications. The importance of 3D printing techniques has bloomed in the sensing world due to their essential advantages of quick fabrication, easy accessibility, processing of varied materials and sustainability. Along with the introduction of the necessity and influence of 3D printing techniques for the fabrication of sensors for different healthcare applications, the paper explains the individual methodologies used to develop sensing prototypes. Six different 3D printing techniques have been explained in the manuscript, followed by drawing a comparison between them in terms of their advantages, disadvantages, materials being processed, resolution, repeatability, accuracy and applications. Finally, a conclusion of the paper is provided with some of the challenges of the current 3D printing techniques about the developed sensing prototypes, their corresponding remedial solutions and a market survey determining the expenditure on 3D printing for biomedical sensing prototypes.

Management of Economics and State "Bottom"

2020 ◽  
Vol 17 (6) ◽  
pp. 76-91
Author(s):  
E. D. Solozhentsev
Keyword(s):  
Quality Of Life ◽  
Artificial Intelligence ◽  
Probabilistic Models ◽  
Human Life ◽  
Special Software ◽  
Human Quality ◽  
Relationship Of ◽  
The Relationship

The scientific problem of economics “Managing the quality of human life” is formulated on the basis of artificial intelligence, algebra of logic and logical-probabilistic calculus. Managing the quality of human life is represented by managing the processes of his treatment, training and decision making. Events in these processes and the corresponding logical variables relate to the behavior of a person, other persons and infrastructure. The processes of the quality of human life are modeled, analyzed and managed with the participation of the person himself. Scenarios and structural, logical and probabilistic models of managing the quality of human life are given. Special software for quality management is described. The relationship of human quality of life and the digital economy is examined. We consider the role of public opinion in the management of the “bottom” based on the synthesis of many studies on the management of the economics and the state. The bottom management is also feedback from the top management.

Charge Trapping and Degradation Properties of PZT Thin Films for MEMS

1996 ◽  
Vol 444 ◽  
Author(s):  
Hyeon-Seag Kim ◽  
D. L. Polla ◽  
S. A. Campbell
Keyword(s):  
Thin Films ◽  
Loss Factor ◽  
High Field ◽  
Microelectromechanical Systems ◽  
Charge Trapping ◽  
Metal Organic ◽  
Electrical Reliability ◽  
Silicon Based ◽  
Degradation Properties ◽  
Organic Decomposition

AbstractThe electrical reliability properties of PZT (54/46) thin films have been measured for the purpose of integrating this material with silicon-based microelectromechanical systems. Ferroelectric thin films of PZT were prepared by metal organic decomposition. The charge trapping and degradation properties of these thin films were studied through device characteristics such as hysteresis loop, leakage current, fatigue, dielectric constant, capacitancevoltage, and loss factor measurements. Several unique experimental results have been found. Different degradation processes were verified through fatigue (bipolar stress), low and high charge injection (unipolar stress), and high field stressing (unipolar stress).

Model Kajian Pesantren: Studi Kritis terhadap Buku Dinamika Sistem Pendidikan Pesantren karya Mastuhu

1970 ◽  
Vol 11 (3) ◽  
pp. 408-421
Author(s):  
Fauzi Fauzi
Keyword(s):  
Educational System ◽  
Education System ◽  
Human Life ◽  
Great Contribution ◽  
Basic Study ◽  
Work Content ◽  
Study Approach ◽  
Cultural Aspect ◽  
Religious Aspect

As typical Indonesian education institute, pesantren with all its component, tradition, culture, and uniqueness have drawn attention many expert and researchers. Pesantren existence has given great contribution to enhancement of the quality of human life. Many role have been played by pesantren; in social, political, economics, cultural aspect; and of course religious aspect which its basic study. These realities in turn have invited the attention of many circles to continuously examine, checking, or studying dynamics, growth, and also existence of pesantren. Among the study result is Mastuhu’s research: Dynamics of System of Education Pesantren, a Study about Element and Value of Pesantren Educational System. With this masterpiece, Mastuhu trying to promote the form of study pesantren which do not merely touching manifest (visible) aspect, but trying to find the values which is consisted inside that manifest; so can found positive, negative, and plus-minus items from pesantren’s education which need and needn’t to be developed in national’s education system. Through this article, the writer will express the work content from a perspective of its study approach.

Quality indicator of the smart city transportation and logistics system

2020 ◽  
Vol 19 (11) ◽  
pp. 2116-2135
Author(s):  
G.V. Savin
Keyword(s):  
Intelligent Transportation Systems ◽  
Smart City ◽  
Urban Areas ◽  
Human Life ◽  
Life Quality ◽  
Intelligent Transportation ◽  
Transportation Systems ◽  
Logistics System ◽  
Organization And Management

Subject. The article considers functioning and development of process flows of transportation and logistics system of a smart city. Objectives. The study identifies factors and dependencies of the quality of human life on the organization and management of stream processes. Methods. I perform a comparative analysis of previous studies, taking into account the uniquely designed results, and the econometric analysis. Results. The study builds multiple regression models that are associated with stream processes, highlights interdependent indicators of temporary traffic and pollution that affect the indicator of life quality. However, the identified congestion indicator enables to predict the time spent in traffic jams per year for all participants of stream processes. Conclusions. The introduction of modern intelligent transportation systems as a component of the transportation and logistics system of a smart city does not fully solve the problems of congestion in cities at the current rate of urbanization and motorization. A viable solution is to develop cooperative and autonomous intelligent transportation systems based on the logistics approach. This will ensure control over congestion, the reduction of which will contribute to improving the life quality of people in urban areas.

Arrangement of Archives of Cloud Computing Based and Utilization of Microsoft Access

2018 ◽  
Vol 1 ◽  
pp. 198
Author(s):  
Lusy Tunik Muharlisiani ◽  
Henny Sukrisno ◽  
Emmy Wahyuningtyas ◽  
Shofiya Syidada ◽  
Dina Chamidah
Keyword(s):  
Cloud Computing ◽  
Public Service ◽  
Human Life ◽  
Electronic System ◽  
Main Function ◽  
Scientific Publications ◽  
Data Manipulation ◽  
Administrative Management ◽  
Microsoft Access

Service at the “Kelurahan” is a very important part in determining the success of development, especially in public service. The problem faced is the lack of skill level of the “Kelurahan” apparatus with the more dynamic demands of the community and the archive management system is still conventional and manual that is writing the identity of the archive into the book agenda, expedition, control card, and borrowed archive card, so it takes a more practical electronic system, effective and efficient so required to develop themselves in order to improve public services. Conventional administration and archive management must be transformed into cloud-based computing (digital), for which archiving managers should always be responsive and follow these developments and wherever possible in order to utilize for archival activities, with greater access expected archives are evidence at once able to talk about historical facts and events and be able to give meaning and benefit to human life, so archives that were only visible and readable at archival centers can now be accessed online, and even their services have led to automated service systems. Using Microsoft Access which its main function is to handle the process of data manipulation and manufacture of a system, this system is built so that the bias runs on Cloud which means Cloud itself is a paradigm in which information is permanently stored on servers on the internet and stored. The purpose of this program is the implementation of administrative management that has been based cloud computing (digital) and is expected to be a solution in managing the archive so that if it has been designed and programmed, it can be stored in the computer and benefi- cial to the “Kelurahan” apparatus and add in the field of management archives in the form of improving the quality of service to the community, can facilitate and scientific publications.

ASSECSSING MOCA TEST IN SUBACUTE STROKE PATIENTS AND COMPARE MOCA VERSUS MMSE

2016 ◽  
pp. 120-127
Author(s):  
Dinh Toan Nguyen
Keyword(s):  
Human Life ◽  
Statistical Significance ◽  
High Sensitivity ◽  
Stroke Patients ◽  
Cross Sectional ◽  
Female Age ◽  
Subacute Stroke ◽  
Duration Of Illness ◽  
Dsm Iv

Background: Dementia after stroke, particularly subacute period is often overlooked. Today the quality of human life is increasingly high, finding scales that have high value for detection of dementia in patients with stroke is increasingly interested. MoCA test is high sensitivity with mild dementia and identify more abnormalities of awareness caused by vascular, but MoCA have not been studied much in Vietnam. Objective: Assessing MoCA test in subacute stroke patients and compare MoCA versus MMSE in these patients. Subjects: 90 patients with subacute stroke period, these people are being treated at Department of cardiovascular internal medicine at Hue Central Hospital, from 7/2014 - 7/2015. Methods: cross-sectional description and analysis. Results: The mean age is 65.57 ± 13.38, accounting for 54.4% male and 45.6% female. Age, duration of illness has weak correlation with MoCA. The risk factors: hypertension, stroke ischemic transient, alcoholism, smoking, heart disease, diabetes, dyslipidemia related no statistical significance with MoCA. The proportion of dementia in subacute stroke according MoCA is 82.2%. The concordance between MoCA and MMSE was good (kappa = 0.684). Using DSM-IV criteria as the gold standard we found MoCA more valuable in the dementia diagnosis than MMSE (AUC 0.864 versus 0.774, p <0.05). Conclusion: The rate of dementia in stroke subacute period according MoCA is quite high. MoCA is valuable than MMSE in detecting dementia in patients with stroke subacute period, this scale is short, easy to implement so should put into using widely in clinical practice. Key words: MoCA test, subacute stroke, dementia

Systematic approaches in water management: Aquatic outlook and decision support systems combining monitoring, research, policy analysis and information technology

1996 ◽  
Vol 34 (12) ◽  
pp. 9-16 ◽  
Author(s):  
J. de Jong ◽  
J. T. van Buuren ◽  
J. P. A. Luiten
Keyword(s):  
Water Management ◽  
Policy Analysis ◽  
Research Policy ◽  
Human Life ◽  
Management Policy ◽  
Ecological Aspects ◽  
Management Plans ◽  
Water Management Plans ◽  
Life On Earth

Sustained developments is the target of almost every modern water management policy. Sustainability is focused on human life and on the ecological quality of our environment. Both aspects are essential for life on earth. Within a river catchment area this means that well balanced relations have to be laid between human activities and ecological aspects in the involved areas. Policy analysis is especially looking for the most efficient way to analyse and to overcome bottlenecks. In The Netherlands project “The Aquatic Outlook” all these elements are worked out in a nationwide scale, providing the scientific base and policy analysis from which future water management plans can be derived.

Sign in / Sign up

Export Citation Format

Share Document