scholarly journals Denoising Algorithm for the FY-4A GIIRS Based on Principal Component Analysis

2019 ◽  
Vol 11 (22) ◽  
pp. 2710 ◽  
Author(s):  
Sihui Fan ◽  
Wei Han ◽  
Zhiqiu Gao ◽  
Ruoying Yin ◽  
Yu Zheng
Keyword(s):  
Principal Component Analysis ◽  
Spectral Resolution ◽  
Principal Component ◽  
Component Analysis ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Observation Data ◽  
Observation Error ◽  
Array Position

The Geostationary Interferometric Infrared Sounder (GIIRS) is the first high-spectral resolution advanced infrared (IR) sounder onboard the new-generation Chinese geostationary meteorological satellite FengYun-4A (FY-4A). The GIIRS has 1650 channels, and its spectrum ranges from 700 to 2250 cm−1 with an unapodized spectral resolution of 0.625 cm−1. It represents a significant breakthrough for measurements with high temporal, spatial and spectral resolutions worldwide. Many GIIRS channels have quite similar spectral signal characteristics that are highly correlated with each other in content and have a high degree of information redundancy. Therefore, this paper applies a principal component analysis (PCA)-based denoising algorithm (PDA) to study simulation data with different noise levels and observation data to reduce noise. The results show that the channel reconstruction using inter-channel spatial dependency and spectral similarity can reduce the noise in the observation brightness temperature (BT). A comparison of the BT observed by the GIIRS (O) with the BT simulated by the radiative transfer model (B) shows that a deviation occurs in the observation channel depending on the observation array. The results show that the array features of the reconstructed observation BT (rrO) depending on the observation array are weakened and the effect of the array position on the observations in the sub-center of the field of regard (FOR) are partially eliminated after the PDA procedure is applied. The high observation and simulation differences (O-B) in the sub-center of the FOR array notably reduced after the PDA procedure is implemented. The improvement of the high O-B is more distinct, and the low O-B becomes smoother. In each scan line, the standard deviation of the reconstructed background departures (rrO-B) is lower than that of the background departures (O-B). The observation error calculated by posterior estimation based on variational assimilation also verifies the efficiency of the PDA. The typhoon experiment also shows that among the 29 selected assimilation channels, the observation error of 65% of the channels was reduced as calculated by the triangle method.

Toward Ensemble Assimilation of Hyperspectral Satellite Observations with Data Compression and Dimension Reduction Using Principal Component Analysis

2019 ◽  
Vol 147 (10) ◽  
pp. 3505-3518 ◽  
Author(s):  
Yinghui Lu ◽  
Fuqing Zhang
Keyword(s):  
Principal Component Analysis ◽  
Principal Component ◽  
Data Retrieval ◽  
Component Analysis ◽  
Training Dataset ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Atmospheric Conditions ◽  
Brightness Temperatures ◽  
Atmospheric State

Abstract Satellite-based hyperspectral radiometers usually have thousands of infrared channels that contain atmospheric state information with higher vertical resolution compared to observations from traditional sensors. However, the large numbers of channels can lead to computational burden in satellite data retrieval and assimilation. Furthermore, most of the channels are highly correlated and the pieces of independent information contained in the hyperspectral observations are usually much smaller than the number of channels. Principal component analysis (PCA) was used in this research to compress the observational information content contained in the Atmospheric Infrared Sounder (AIRS) channels to a few leading principal components (PCs). The corresponding PC scores were then assimilated into a PCA-based ensemble Kalman filter (EnKF) system. In this proof-of-concept study based on simulated observations, hyperspectral brightness temperatures were simulated using the atmospheric state vectors from convection-permitting ensemble simulations of Hurricane Harvey (2017) as input to the Community Radiative Transfer Model (CRTM). The PCs were derived from a preexisting training dataset of brightness temperatures calculated from convection-permitting simulation over a large domain in the Indian Ocean representing generic atmospheric conditions over tropical oceans. The EnKF increments from assimilating many individual measurements in the brightness temperature space were compared to the EnKF increments from assimilating significantly fewer numbers of leading PCs. Results showed that assimilating about 10–20 leading PCs could yield increments that were nearly indistinguishable to that from assimilating hyperspectral measurements from orders of magnitude larger number of hyperspectral channels.

Dependence of Simulation Biases at AHI Surface-Sensitive Channels on Land Surface Emissivity over China

2018 ◽  
Vol 35 (6) ◽  
pp. 1283-1298 ◽  
Author(s):  
X. Zhuge ◽  
X. Zou ◽  
F. Weng ◽  
M. Sun
Keyword(s):  
Brightness Temperature ◽  
Spectral Resolution ◽  
Land Surface ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Surface Emissivity ◽  
Bare Rock ◽  
Land Surface Emissivity ◽  
M Channels

AbstractThis study compares the simulation biases of Advanced Himawari Imager (AHI) brightness temperature to observations made at night over China through the use of three land surface emissivity (LSE) datasets. The University of Wisconsin–Madison High Spectral Resolution Emissivity dataset, the Combined Advanced Spaceborne Thermal Emission and Reflection Radiometer and Moderate Resolution Imaging Spectroradiometer Emissivity database over Land High Spectral Resolution Emissivity dataset, and the International Geosphere–Biosphere Programme (IGBP) infrared LSE module, as well as land skin temperature observations from the National Basic Meteorological Observing stations in China are used as inputs to the Community Radiative Transfer Model. The results suggest that the standard deviations of AHI observations minus background simulations (OMBs) are largely consistent for the three LSE datasets. Also, negative biases of the OMBs of brightness temperature uniformly occur for each of the three datasets. There are no significant differences in OMB biases estimated with the three LSE datasets over cropland and forest surface types for all five AHI surface-sensitive channels. Over the grassland surface type, significant differences (~0.8 K) are found at the 10.4-, 11.2-, and 12.4-μm channels if using the IGBP dataset. Over nonvegetated surface types (e.g., sandy land, gobi, and bare rock), the lack of a monthly variation in IGBP LSE introduces large negative biases for the 3.9- and 8.6-μm channels, which are greater than those from the two other LSE datasets. Thus, improvements in simulating AHI infrared surface-sensitive channels can be made when using spatially and temporally varying LSE estimates.

scholarly journals Retrieval of Ice Cloud Properties from AIRS and MODIS Observations Based on a Fast High-Spectral-Resolution Radiative Transfer Model

2013 ◽  
Vol 52 (3) ◽  
pp. 710-726 ◽  
Author(s):  
Chenxi Wang ◽  
Ping Yang ◽  
Steven Platnick ◽  
Andrew K. Heidinger ◽  
Bryan A. Baum ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Spectral Resolution ◽  
Spectral Response ◽  
Thermal Infrared ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Retrieval Method ◽  
Ice Cloud ◽  
Cloud Properties

AbstractA computationally efficient high-spectral-resolution cloudy-sky radiative transfer model (HRTM) in the thermal infrared region (700–1300 cm−1, 0.1 cm−1 spectral resolution) is advanced for simulating the upwelling radiance at the top of atmosphere and for retrieving cloud properties. A precomputed transmittance database is generated for simulating the absorption contributed by up to seven major atmospheric absorptive gases (H2O, CO2, O3, O2, CH4, CO, and N2O) by using a rigorous line-by-line radiative transfer model (LBLRTM). Both the line absorption of individual gases and continuum absorption are included in the database. A high-spectral-resolution ice particle bulk scattering properties database is employed to simulate the radiation transfer within a vertically nonisothermal ice cloud layer. Inherent to HRTM are sensor spectral response functions that couple with high-spectral-resolution measurements in the thermal infrared regions from instruments such as the Atmospheric Infrared Sounder (AIRS) and Infrared Atmospheric Sounding Interferometer. When compared with the LBLRTM and the discrete ordinates radiative transfer model (DISORT), the root-mean-square error of HRTM-simulated single-layer cloud brightness temperatures in the thermal infrared window region is generally smaller than 0.2 K. An ice cloud optical property retrieval scheme is developed using collocated AIRS and Moderate Resolution Imaging Spectroradiometer (MODIS) data. A retrieval method is proposed to take advantage of the high-spectral-resolution instrument. On the basis of the forward model and retrieval method, a case study is presented for the simultaneous retrieval of ice cloud optical thickness τ and effective particle size Deff that includes a cloud-top-altitude self-adjustment approach to improve consistency with simulations.

scholarly journals A synthetic data set of high-spectral resolution infrared spectra for the Arctic atmosphere

2016 ◽  
Author(s):  
C. J. Cox ◽  
P. M. Rowe ◽  
S. P. Neshyba ◽  
V. P. Walden
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Infrared Spectra ◽  
Spectral Resolution ◽  
High Spectral Resolution ◽  
The Arctic ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Data Set ◽  
Atmospheric State

Abstract. Retrievals of cloud microphysical and macrophysical properties from ground-based and satellite-based infrared remote sensing instruments are critical for understanding clouds. However, retrieval uncertainties are difficult to quantify without a standard for comparison. This is particularly true over the polar regions where surface-based data for a cloud climatology are sparse, yet clouds represent a major source of uncertainty in weather and climate models. We describe a synthetic high-spectral resolution infrared data set that is designed to facilitate validation and development of cloud retrieval algorithms for surface- and satellite-based remote sensing instruments. Since the data set is calculated using pre-defined cloudy atmospheres, the properties of the cloud and atmospheric state are known a priori. The atmospheric state used for the simulations is drawn from radiosonde measurements made at the North Slope of Alaska (NSA) Atmospheric Radiation Measurement (ARM) site at Barrow, Alaska (71.325° N, 156.615° W), a location that is generally representative of the western Arctic. The cloud properties for each simulation are selected from statistical distributions derived from past field measurements. Upwelling (at 60 km) and downwelling (at the surface) infrared spectra are simulated for 222 cloudy cases from 50–3000 cm−1 (3.3 to 200 μm) at monochromatic (line-by-line) resolution at a spacing of ~ 0.01 cm−1 using the Line-by-line Radiative Transfer Model (LBLRTM) and the discrete-ordinate-method radiative transfer code (DISORT). These spectra are freely available for interested researchers from the ACADIS data repository (doi:10.5065/D61J97TT).

Sign in / Sign up

Export Citation Format

Share Document