scholarly journals Electrospun Carbon Nanofibers from Biomass and Biomass Blends—Current Trends

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1071
Author(s):  
Imane Moulefera ◽  
Marah Trabelsi ◽  
Al Mamun ◽  
Lilia Sabantina
Keyword(s):  
Carbon Nanofibers ◽  
Carbon Materials ◽  
Carbon Nanofiber ◽  
Low Cost ◽  
New Developments ◽  
Manufacturing Method ◽  
Microwave Assisted ◽  
Current Trends ◽  
Green Materials ◽  
Research Gap

In recent years, ecological issues have led to the search for new green materials from biomass as precursors for producing carbon materials (CNFs). Such green materials are more attractive than traditional petroleum-based materials, which are environmentally harmful and non-biodegradable. Biomass could be ideal precursors for nanofibers since they stem from renewable sources and are low-cost. Recently, many authors have focused intensively on nanofibers’ production from biomass using microwave-assisted pyrolysis, hydrothermal treatment, ultrasonication method, but only a few on electrospinning methods. Moreover, still few studies deal with the production of electrospun carbon nanofibers from biomass. This review focuses on the new developments and trends of electrospun carbon nanofibers from biomass and aims to fill this research gap. The review is focusing on recollecting the most recent investigations about the preparation of carbon nanofiber from biomass and biopolymers as precursors using electrospinning as the manufacturing method, and the most important applications, such as energy storage that include fuel cells, electrochemical batteries and supercapacitors, as well as wastewater treatment, CO2 capture, and medicine.

scholarly journals Nanostructured carbons containing FeNi/NiFe2O4 supported over N-doped carbon nanofibers for oxygen reduction and evolution reactions

RSC Advances ◽  
2019 ◽  
Vol 9 (63) ◽  
pp. 36586-36599 ◽  
Author(s):  
Iram Aziz ◽  
JinGoo Lee ◽  
Hatice Duran ◽  
Katrin Kirchhoff ◽  
Richard T. Baker ◽  
...  
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Oxygen Evolution ◽  
Carbon Nanofibers ◽  
Oxygen Evolution Reaction ◽  
Precious Metal ◽  
Carbon Materials ◽  
Low Cost ◽  
Reduction Reaction ◽  
High Durability

Non-precious metal-based electrocatalysts on carbon materials with high durability and low cost have been developed to ameliorate the oxygen-reduction reaction (ORR) and oxygen-evolution reaction (OER).

scholarly journals Stainless Steel Mesh Supported Carbon Nanofibers for Electrode in Bioelectrochemical System

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Jing Wang ◽  
Ming Li ◽  
Fangtai Liu ◽  
Shuiliang Chen
Keyword(s):  
Stainless Steel ◽  
Carbon Nanofibers ◽  
High Performance ◽  
Carbon Nanofiber ◽  
Low Cost ◽  
Chemical Vapor ◽  
Deposition Process ◽  
Bioelectrochemical System ◽  
Experimental Conditions ◽  
Direct Growth

We proposed a self-connected carbon nanofiber design for electrode in microbial bioelectrochemical system. This design was realized by direct growth of carbon nanofibers (CNFs) onto stainless steel (SSM) via a chemical vapor deposition process without addition of any external catalysts. In the CNFs-SSM composite electrode, the SSM acted as the conductive network and ensured efficient substrate and proton transfer, and the CNFs layer served as highly porous habitats for thick biofilm propagation. The current generated by the CNFs-SSM was 200 times higher than the bare SSM under the same experimental conditions. This provided a simple and promising method for preparation of electrode material with high performance and low-cost in bioelectrochemical system.

Carbon Nanofiber-Network Sensor Films for Strain Measurement in Composites

2008 ◽  
Vol 1129 ◽  
Author(s):  
Nguyen Q Nguyen ◽  
Sangyoon Lee ◽  
Nikhil Gupta
Keyword(s):  
Carbon Nanofibers ◽  
Strain Measurement ◽  
Carbon Nanofiber ◽  
Force Measurement ◽  
Low Cost ◽  
High Sensitivity ◽  
Adhesively Bonded ◽  
Sensor Film ◽  
Experimental Scheme ◽  
Efficient Alternative

AbstractA carbon nanofiber-based sensor film is designed and calibrated for force measurement. The sensor is designed for use in structural health monitoring of composite materials. The sensing scheme is based on creating a network of carbon nanofibers on the surface of the composite material. In the experimental scheme a patch of nanofiber reinforced epoxy resin film is developed and adhesively bonded to the laminate. The extension of the sensor film due to the applied force leads to a change in the connectivity of carbon nanofibers in the film, resulting in the change in the resistance of the network. Results show that such sensing schemes have high sensitivity and repeatability. Use of nanofibers can provide a low cost and more efficient alternative to other sensor films that rely on carbon nanotubes.

scholarly journals Rheological Issues in Carbon-Based Inks for Additive Manufacturing

Micromachines ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 99 ◽  
Author(s):  
Charlie O’Mahony ◽  
Ehtsham Ul Haq ◽  
Christophe Sillien ◽  
Syed A.M. Tofail
Keyword(s):  
Additive Manufacturing ◽  
Carbon Fibers ◽  
Carbon Materials ◽  
Low Cost ◽  
Complex Geometries ◽  
Flow Properties ◽  
Manufacturing Method ◽  
Commercial Market ◽  
Conductive Properties ◽  
Carbon Based

As the industry and commercial market move towards the optimization of printing and additive manufacturing, it becomes important to understand how to obtain the most from the materials while maintaining the ability to print complex geometries effectively. Combining such a manufacturing method with advanced carbon materials, such as Graphene, Carbon Nanotubes, and Carbon fibers, with their mechanical and conductive properties, delivers a cutting-edge combination of low-cost conductive products. Through the process of printing the effectiveness of these properties decreases. Thorough optimization is required to determine the idealized ink functional and flow properties to ensure maximum printability and functionalities offered by carbon nanoforms. The optimization of these properties then is limited by the printability. By determining the physical properties of printability and flow properties of the inks, calculated compromises can be made for the ink design. In this review we have discussed the connection between the rheology of carbon-based inks and the methodologies for maintaining the maximum pristine carbon material properties.

Cytocompatibility of Carbon Nanofiber Materials for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Carbon Fiber ◽  
Surface Energy ◽  
Carbon Nanofibers ◽  
Carbon Fibers ◽  
Carbon Nanofiber ◽  
Fiber Composite ◽  
Scar Tissue ◽  
Pc 12 Cells ◽  
Low Surface Energy ◽  
Poly Carbonate

AbstractSince the cytocompatibility of carbon nanofibers with respect to neural applications remains largely uninvestigated, the objective of the present in vitro study was to determine cytocompatibility properties of formulations containing carbon nanofibers. Carbon fiber substrates were prepared from four different types of carbon fibers, two with nanoscale diameters (nanophase, or less than or equal to 100 nm) and two with conventional diameters (or greater than 200 nm). Within these two categories, both a high and a low surface energy fiber were investigated and tested. Astrocytes (glial scar tissue-forming cells) and pheochromocytoma cells (PC-12; neuronal-like cells) were seeded separately onto the substrates. Results provided the first evidence that astrocytes preferentially adhered on the carbon fiber that had the largest diameter and the lowest surface energy. PC-12 cells exhibited the most neurites on the carbon fiber with nanodimensions and low surface energy. These results may indicate that PC-12 cells prefer nanoscale carbon fibers while astrocytes prefer conventional scale fibers. A composite was formed from poly-carbonate urethane and the 60 nm carbon fiber. Composite substrates were thus formed using different weight percentages of this fiber in the polymer matrix. Increased astrocyte adherence and PC-12 neurite density corresponded to decreasing amounts of the carbon nanofibers in the poly-carbonate urethane matrices. Controlling carbon fiber diameter may be an approach for increasing implant contact with neurons and decreasing scar tissue formation.

Cytocompatibility and Material Properties of Poly-carbonate Urethane/Carbon Nanofiber Composites for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanofibers ◽  
Material Properties ◽  
Carbon Nanofiber ◽  
Scar Tissue ◽  
Tissue Response ◽  
Positive Interactions ◽  
Weight Percentage ◽  
Poly Carbonate

AbstractCarbon nanofibers possess excellent conductivity properties, which may be beneficial in the design of more effective neural prostheses, however, limited evidence on their cytocompatibility properties exists. The objective of the present in vitro study was to determine cytocompatibility and material properties of formulations containing carbon nanofibers to predict the gliotic scar tissue response. Poly-carbonate urethane was combined with carbon nanofibers in varying weight percentages to provide a supportive matrix with beneficial bulk electrical and mechanical properties. The substrates were tested for mechanical properties and conductivity. Astrocytes (glial scar tissue-forming cells) were seeded onto the substrates for adhesion. Results provided the first evidence that astrocytes preferentially adhered to the composite material that contained the lowest weight percentage of carbon nanofibers. Positive interactions with neurons, and, at the same time, limited astrocyte functions leading to decreased gliotic scar tissue formation are essential for increased neuronal implant efficacy.

scholarly journals Preparation of Zn-MOFs by microwave-assisted ball milling for removal of tetracycline hydrochloride and Congo red from wastewater

2021 ◽  
Vol 10 (1) ◽  
pp. 125-133
Author(s):  
Qinhui Ren ◽  
Fuhua Wei ◽  
Hongliang Chen ◽  
Ding Chen ◽  
Bo Ding
Keyword(s):  
Ball Milling ◽  
Congo Red ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Tetracycline Hydrochloride ◽  
Infrared Spectrometry ◽  
X Ray Diffraction ◽  
Wastewater Purification ◽  
Microwave Assisted ◽  
Metal Organic

Abstract In this study, we prepared Zn-MOFs as an ordinary, low-cost, and efficiency method taking advantage of zinc(ii) acetate monohydrate and 1,3,5-benzenetricarboxylic acid in microwave-assisted ball milling. The Zn-MOFs were measured via scanning electron microscopy, infrared spectrometry, X-ray diffraction, and thermogravimetry. We explored its use as a photocatalyst for the degradation of tetracycline hydrochloride and Congo red from aqueous solutions. The results demonstrate that the kinetic model was appropriate for the removal of organic pollutants. In general, it is feasible, inexpensive, and effective to use metal organic framework (MOF) to treat waste liquid. Therefore, our findings indicate that Zn-MOFs have broad application vista in wastewater purification.

scholarly journals A flexible and highly sensitive pressure sensor based on three-dimensional electrospun carbon nanofibers

RSC Advances ◽  
2021 ◽  
Vol 11 (23) ◽  
pp. 13898-13905
Author(s):  
Chuan Cai ◽  
He Gong ◽  
Weiping Li ◽  
Feng Gao ◽  
Qiushi Jiang ◽  
...  
Keyword(s):  
Carbon Nanofibers ◽  
Pressure Sensor ◽  
Carbon Nanofiber ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Highly Sensitive ◽  
Sensitive Pressure

A three-dimensional electrospun carbon nanofiber network was used to measure press strains with high sensitivity.

scholarly journals Current Trends in Polymer Based Sensors

Chemosensors ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 108
Author(s):  
Giancarla Alberti ◽  
Camilla Zanoni ◽  
Vittorio Losi ◽  
Lisa Rita Magnaghi ◽  
Raffaela Biesuz
Keyword(s):  
Chemical Structure ◽  
Low Cost ◽  
Sensing Applications ◽  
Current Trends ◽  
Manufacturing Methods ◽  
New Devices

This review illustrates various types of polymer and nanocomposite polymeric based sensors used in a wide variety of devices. Moreover, it provides an overview of the trends and challenges in sensor research. As fundamental components of new devices, polymers play an important role in sensing applications. Indeed, polymers offer many advantages for sensor technologies: their manufacturing methods are pretty simple, they are relatively low-cost materials, and they can be functionalized and placed on different substrates. Polymers can participate in sensing mechanisms or act as supports for the sensing units. Another good quality of polymer-based materials is that their chemical structure can be modified to enhance their reactivity, biocompatibility, resistance to degradation, and flexibility.

Sign in / Sign up

Export Citation Format

Share Document