scholarly journals Factorial Design and Optimization of Landfill Leachate Treatment Using Tannin-Based Natural Coagulant

Polymers ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1349 ◽  
Author(s):  
Tawfiq J. H. Banch ◽  
Marlia M. Hanafiah ◽  
Abbas F. M. Alkarkhi ◽  
Salem S. Abu Amr
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Landfill Leachate ◽  
Treatment Process ◽  
Oxygen Demand ◽  
Treatment Efficiency ◽  
Leachate Treatment ◽  
Natural Coagulant ◽  
Design And Optimization ◽  
Central Composite

In this study, tannin-based natural coagulant was used to treat stabilized landfill leachate. Tannin modified with amino group was utilized for the treatment process. Central composite design (CCD) was used to investigate and optimize the effect of tannin dosage and pH on four responses. The treatment efficiency was evaluated based on the removal of four selected (responses) parameters; namely, chemical oxygen demand (COD), color, NH3–N and total suspended solids (TSS). The optimum removal efficiency for COD, TSS, NH3–N and color was obtained using a tannin dosage of 0.73 g at a pH of 6. Moreover, the removal efficiency for selected heavy metals from leachate; namely, iron (Fe2+), zinc (Zn2+), copper (Cu2+), chromium (Cr2+), cadmium (Cd2+), lead (Pb2+), arsenic (As3+), and cobalt (Co2+) was also investigated. The results for removal efficiency for COD, TSS, NH3–N, and color were 53.50%, 60.26%, and 91.39%, respectively. The removal of selected heavy metals from leachate for Fe2+, Zn2+, Cu2+, Cr2+, Cd2+, Pb2+, As3+ and cobalt Co2+ were 89.76%, 94.61%, 94.15%, 89.94%, 17.26%, 93.78%, 86.43% and 84.19%, respectively. The results demonstrate that tannin-based natural coagulant could effectively remove organic compounds and heavy metals from stabilized landfill leachate.

Raw landfill leachate treatment using an electrocoagulation process with a novel rotating electrode reactor

2019 ◽  
Vol 80 (3) ◽  
pp. 458-465 ◽  
Author(s):  
Ahmed Samir Naje ◽  
Mohammed A. Ajeel ◽  
Isam Mohamad Ali ◽  
Hussein A. M. Al-Zubaidi ◽  
Peter Adeniyi Alaba
Keyword(s):  
Landfill Leachate ◽  
Suspended Solids ◽  
Treatment Process ◽  
Oxygen Demand ◽  
Neutral Medium ◽  
Leachate Treatment ◽  
Rotating Speed ◽  
Electrode Distance ◽  
Treatment Performance ◽  
Electrocoagulation Process

Abstract In this work, landfill leachate treatment by electrocoagulation process with a novel rotating anode reactor was studied. The influence of rotating anode speed on the removal efficiency of chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS) of raw landfill leachate was investigated. The influence of operating parameters like leachate pH, leachate temperature, current, and inter-distance between the cathode rings and anode impellers on the electrocoagulation performance were also investigated. The results revealed the optimum rotating speed is 150 rpm and increasing the rotating speed above this value led to reducing process performance. The leachate electrocoagulation treatment process favors the neutral medium and the treatment performance increases with increasing current intensity. Furthermore, the electrocoagulation treatment performance improves with increasing leachate temperature. However, the performance reduces with increasing inter-electrode distance.

scholarly journals Potassium Ferrate (VI) as the Multifunctional Agent in the Treatment of Landfill Leachate

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5017
Author(s):  
Maciej Thomas ◽  
Violetta Kozik ◽  
Krzysztof Barbusiński ◽  
Aleksander Sochanik ◽  
Josef Jampilek ◽  
...  
Keyword(s):  
Landfill Leachate ◽  
Oxygen Demand ◽  
Most Probable Number ◽  
Potassium Ferrate ◽  
Leachate Treatment ◽  
Total N ◽  
Probable Number ◽  
Colony Forming Unit ◽  
Central Composite ◽  
Total P

Possible use of potassium ferrate (VI) (K2FeO4) for the treatment of landfill leachate (pH = 8.9, Chemical Oxygen Demand (COD) 770 mg O2/L, Total Organic Carbon (TOC) 230 mg/L, Total Nitrogen (Total N) 120 mg/L, Total Phosphorus (Total P) 12 mg/L, Total Coli Count (TCC) 6.8 log CFU/mL (Colony-Forming Unit/mL), Most Probable Number (MPN) of fecal enterococci 4.0 log/100 mL, Total Proteolytic Count (TPC) 4.4 log CFU/mL) to remove COD was investigated. Central Composite Design (CCD) and Response Surface Methodology (RSM) were applied for modelling and optimizing the purification process. Conformity of experimental and predicted data (R2 = 0.8477, Radj2 = 0.7462) were verified using Analysis of Variance (ANOVA). Application of K2FeO4 using CCD/RSM allowed to decrease COD, TOC, Total N, Total P, TCC, MPN of fecal enterococci and TPC by 76.2%, 82.6%, 68.3%, 91.6%, 99.0%, 95.8% and 99.3%, respectively, by using K2FeO4 0.390 g/L, at pH = 2.3 within 25 min. Application of equivalent amount of iron (as FeSO4 × 7H2O and FeCl3 × 6H2O) under the same conditions allowed to diminish COD, TOC, Total N, Total P, TCC, MPN of fecal enterococci and TPC only by 38.1%, 37.0%, 20.8%, 95.8%, 94.4%, 58.2%, 90.8% and 41.6%, 45.7%, 29.2%, 95.8%, 92.1%, 58.2%, 90.0%, respectively. Thus, K2FeO4 could be applied as an environmentally friendly reagent for landfill leachate treatment.

scholarly journals Potential of Duckweed (Lemna minor) for the Phytoremediation of Landfill Leachate

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
M. K. Daud ◽  
Shafaqat Ali ◽  
Zohaib Abbas ◽  
Ihsan Elahi Zaheer ◽  
Muhammad Ahsan Riaz ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Landfill Leachate ◽  
Suspended Solids ◽  
Bioconcentration Factor ◽  
Lemna Minor ◽  
Oxygen Demand ◽  
Water Contaminants ◽  
Physiochemical Parameters ◽  
Maximum Value

Phytoextraction of zinc, copper, lead, iron, and nickel from landfill leachate by duckweed (L. minor) was investigated every 3 days over a period of 2 weeks. Bioconcentration factor and removal efficiency were also calculated. Results of this study proved that L. minor significantly reduced the concentration of heavy metals in landfill leachate. Removal efficiency of L. minor, for all the metals, from landfill leachate was more than 70% with the maximum value for copper (91%). Reduction in chemical oxygen demand (COD) and biological oxygen demand (BOD) was observed by 39% and 47%, respectively. However, other physiochemical parameters like pH, total suspended solids, (TSS) and total dissolved solids (TDS) were reduced by 13%, 33%, and 41%, respectively. The value of bioconcentration factor (BCF) was less than 1 with the maximum figure for copper (0.84) and lead (0.81), showing that the plant is a moderate accumulator for these heavy metals. Duckweed (L. minor) appeared as a sustainable alternative candidate and is recommended for the treatment of landfill leachate waste water contaminants.

scholarly journals Application of Electrocoagulation with a New Steel-Swarf-Based Electrode for the Removal of Heavy Metals and Total Coliforms from Sanitary Landfill Leachate

2021 ◽  
Vol 11 (11) ◽  
pp. 5009
Author(s):  
Mayk Teles de Oliveira ◽  
Ieda Maria Sapateiro Torres ◽  
Humberto Ruggeri ◽  
Paulo Scalize ◽  
Antonio Albuquerque ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Landfill Leachate ◽  
Lower Cost ◽  
Sanitary Landfill ◽  
Leachate Treatment ◽  
Removal Of Heavy Metals ◽  
Waste Characteristics ◽  
Electrode Passivation ◽  
Steel Swarf ◽  
Sanitary Landfill Leachate

Sanitary landfill leachate (LL) composition varies according to climate variables variation, solid waste characteristics and composition, and landfill age. Leachate treatment is essentially carried out trough biological and physicochemical processes, which have showed variability in efficiency and appear a costly solution for the management authorities. Electrocoagulation (EC) seems a suitable solution for leachate treatment taking into account the characteristics of the liquor. One of the problems of EC is the electrode passivation, which affects the longevity of the process. One solution to this problem could be the replacement of the electrode by one made of recyclable material, which would make it possible to change it frequently and at a lower cost. The objective of the present work was to evaluate the removal of heavy metals (As, Ba, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Se and Zn) and coliforms from a LL by EC using electrodes made from steel swarf (SfE) up to 8 h. Removal efficiencies of detected heavy metals were 51%(Cr), 59%(As), 71%(Cd), 72%(Zn), 92%(Ba), 95%(Ni) and >99%(Pb). The microbial load of coliforms in leachate was reduced from 10.76 × 104 CFU/mL (raw leachate) to less than 1 CFU/mL (after treatment with SfE) (i.e., approximately 100% reduction). The use of SfE in EC of LL is very effective in removing heavy metals and coliforms and can be used as alternative treatment solution for such effluents.

scholarly journals Optimization of Coagulation-Flocculation Process of Landfill Leachate by Tin (IV) Chloride Using Response Surface Methodology

2019 ◽  
Vol 6 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Abdul Aziz Hamidi ◽  
Syed Zainal Sharifah Farah Fariza ◽  
Alazaiza Motasem Y.D
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Removal Efficiency ◽  
Landfill Leachate ◽  
Chemical Properties ◽  
Oxygen Demand ◽  
Statistical Design ◽  
Water Infiltration ◽  
Flocculation Process ◽  
Maximum Removal

Landfill leachate is highly polluted and generated as a result of water infiltration through solid waste produced domestically and industrially. This study investigated the applicability of the response surface methodology (RSM) to optimize the removal performances of chemical oxygen demand (COD), color, and suspended solids (SS) from landfill leachate by coagulation process using Tin tetrachloride pentahydrate. The leachate samples were collected from Alor Pongsu Landfill (APLS) in Perak, Malaysia. Before starting the experiments, general characterization was carried out for raw leachate samples to investigate their physical and chemical properties. The effects of the dosage and pH of SnCl4 on the removal performances were evaluated as well. An ideal experimental design was performed based on the central composite design (CCD) by RSM. In addition, this RSM was used to evaluate the effects of process variables and their interaction toward the attainment of their optimum conditions. The statistical design of the experiments and data analysis was resolved using the Design-Expert software. Further, the range of coagulant dosage and pH was selected based on a batch study which was conducted at 13000 mg/L to 17000 mg/L of SnCl4 and pH ranged from 6 to 10. The results showed that the optimum pH and dosage of SnCl4 were 7.17 and 15 g/L, respectively, where the maximum removal efficiency was 67.7% for COD and 100% for color and SS. The results were in agreement with the experimental data with a maximum removal efficiency of 67.84 %, 98.6 %, and 99.3%, for COD, color, and SS, respectively. Overall, this study verified that the RSM method was viable for optimizing the operational condition of the coagulation-flocculation process.

scholarly journals Anaerobic Digestion Process for the Treatment of Sisdole Landfill Leachate in Nepal

2020 ◽  
Vol 55 (4) ◽  
Author(s):  
Bikash Adhikari ◽  
Shilpa Koirala
Keyword(s):  
Anaerobic Digestion ◽  
Removal Efficiency ◽  
Landfill Leachate ◽  
Waste Treatment ◽  
Batch Reactor ◽  
Batch Reactors ◽  
Leachate Treatment ◽  
Anaerobic Digestion Process ◽  
Digestion Process ◽  
Solids Concentration

Along with the population, organic waste has been rising significantly in recent years. The resulting uncontrollable waste loads and conventional methods of waste treatment have begun to cause chaos at the landfill sites. This study evaluates the performance of an anaerobic digestion process using batch reactors for the treatment of landfill leachate collected from the Sisdole landfill site in Nuwakot, Nepal. A lab-scale anaerobic batch reactor was set up in Kathmandu University, Nepal. Using an anaerobic digestion process, COD values of the leachate decreased from 2230 mg/l to 1125 mg/l (removal efficiency of ~50%), whereas total solids concentration decreased from 1925 to 925 mg/L under a retention time of 10 days. In addition, Monod’s model was established to design an Anaerobic Sequential Batch Reactor to achieve better performance, resulting in 85% removal efficiency for the leachate treatment. Overall, this study analyzed the anaerobic digestion process on the landfill leachate of Sisdole, and modeled the process to identify the conditions required for increasing the efficiency of treatment of Sisdole landfill leachate.

Use of dairy reject and fermented Aleo sp. Leaf Gel mixture in the biological Pre-treatment of landfill leachate

2018 ◽  
Vol 13 (1) ◽  
pp. 219-228 ◽  
Author(s):  
Kasmi Mariam ◽  
Elleuch Lobna ◽  
Abidi Haifa ◽  
Cherni Yassmine ◽  
Hosni Cyrine ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Organic Matter ◽  
Size Effect ◽  
Landfill Leachate ◽  
Yeast Strain ◽  
Oxygen Demand ◽  
Treatment Efficiency ◽  
Chemical Oxygen Demand Removal ◽  
Pre Treatment ◽  
Aloe Gel

Abstract In this study the biotreatability of Jebel Chakir landfill leachate (Tunisia) using a mixture of dairy industry reject (bactofugate) and Aloe sp. leaf gel was evaluated. The effect of Aloe gel fermentation using Saccharomyces cerevisiae yeast strain was investigated against some selected bacterial and fungal strains. The inoculation size effect of the treatment mixtures (2, 6, 10 and 12%) in the treatment efficiency was also studied. The obtained results showed that when natural Aloe gel and bactofugate mixtures were used the recorded chemical oxygen demand removal rates exceeded 56% within 48 h of treatment. Whereas, the use of the fermented Aloe gel in the treatment mixtures has promoted the organic matter removal to reach 72%.

Ozonation With Catalyst in Landfill Leachate Treatment

2019 ◽  
pp. 324-354
Author(s):  
Siti Nor Farhana Zakaria
Keyword(s):  
Molecular Structure ◽  
Hydrogen Peroxide ◽  
Hydroxyl Radical ◽  
Chemical Oxygen Demand ◽  
Human Health ◽  
Chemical Reaction ◽  
Landfill Leachate ◽  
Treatment Cost ◽  
Oxygen Demand ◽  
Leachate Treatment

Landfill leachate is a hazardous pollutant generated from a landfill site. Discharge of landfill leachate has caused a major contamination to the environment and detrimental to human health. This chapter introduces an alternative method to treat recalcitrant pollutant in leachate by using ozonation with catalyst. The production of hydroxyl radical in ozonation was not enough to oxidize complex molecular structure in the leachate. Theoretically, the addition of catalyst enhances the capacity of radical and accelerates the chemical reaction. The effectiveness of ozonation with Fenton (O3/Fenton), hydrogen peroxide (O3/H2O2), and zirconium tetrachloride (O3/ZrCl4) in removing pollutant such as chemical oxygen demand (COD), color, and improvement of biodegradability by using this process were also discussed in this chapter. Comparison in term of treatment cost and benefits of the application of chemical as catalyst are briefly elaborated at the end of this chapter.

scholarly journals Application of Anaerobic and Ozonation Processes in the Landfill Leachate Treatment

2006 ◽  
Vol 1 (3) ◽  
Author(s):  
A. Vilar ◽  
S. Gil ◽  
M. A. Aparicio ◽  
C. Kennes ◽  
M. C. Veiga
Keyword(s):  
Organic Matter ◽  
Landfill Leachate ◽  
Biological System ◽  
Contact Time ◽  
Treatment Process ◽  
Tap Water ◽  
Leachate Treatment ◽  
Ozone Dose ◽  
Pre Treatment ◽  
Ozonation Process

The optimization of leachate treatment was investigated as well as the configuration of a biological-ozonation process. The leachate used for the experiments was diluted to 1/5 with tap water and treated anaerobically. The anaerobic effluent and the raw leachate were treated with ozone in order to increase their biodegradability getting the minimum organic matter removal. Both were submitted to the ozonation process, applying a constant ozone dose and varying the contact time. The ozonation of raw leachate produced a decrease of COD and BOD5 concentrations as well as BOD5/COD ratios, applying an ozone dose of 38.72 mg/L·min and contact times between 15 and 60 minutes. Ozonation as a pre-treatment process to the biological system did not improve the biodegradability of the raw leachate. The anaerobic effluent from the reactor fed with leachate diluted to 1/5, was subjected to an ozone dose of 34.99 mg/L·min and applying different contact times. BODf values increased from 74.75 up to 1220 mg/L and BODf/COD ratios reached values higher than 1. Then, the application of ozone to the anaerobic effluent led to the improvement of the biodegradability of the leachate as well as the BODf/COD ratio for all the contact times used.

Sign in / Sign up

Export Citation Format

Share Document