scholarly journals Terpyridine-Functionalized Calixarenes: Synthesis, Characterization and Anion Sensing Applications

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 87
Author(s):  
Nicola Y. Edwards ◽  
David M. Schnable ◽  
Ioana R. Gearba-Dolocan ◽  
Jenna L. Strubhar
Keyword(s):  
Photophysical Properties ◽  
Binding Constants ◽  
Molar Absorptivity ◽  
Quantum Yields ◽  
Anion Sensing ◽  
Fluorescence Studies ◽  
Sensing Applications ◽  
Amide Coupling ◽  
Vis Spectroscopy ◽  
Arene Ligand

Lanthanide complexes have been developed and are reported herein. These complexes were derived from a terpyridine-functionalized calix[4]arene ligand, chelated with Tb3+ and Eu3+. Synthesis of these complexes was achieved in two steps from a calix[4]arene derivative: (1) amide coupling of a calix[4]arene bearing carboxylic acid functionalities and (2) metallation with a lanthanide triflate salt. The ligand and its complexes were characterized by NMR (1H and 13C), fluorescence and UV-vis spectroscopy as well as MS. The photophysical properties of these complexes were studied; high molar absorptivity values, modest quantum yields and luminescence lifetimes on the ms timescale were obtained. Anion binding results in a change in the photophysical properties of the complexes. The anion sensing ability of the Tb(III) complex was evaluated via visual detection, UV-vis and fluorescence studies. The sensor was found to be responsive towards a variety of anions, and large binding constants were obtained for the coordination of anions to the sensor.

Synthesis and Photophysical Properties of 3-(Trifluoromethyl)-2H-imidazo[5,1-a]isoquinolinium Chloride Derivatives

Synlett ◽  
2017 ◽  
Vol 29 (03) ◽  
pp. 296-300 ◽  
Author(s):  
Ali Darehkordi ◽  
Fariba Rahmani ◽  
Mahin Ramezani ◽  
Alireza Bazmandegan-Shamili
Keyword(s):  
Blue Light ◽  
Uv Radiation ◽  
Photophysical Properties ◽  
Molecular Probes ◽  
Quantum Yields ◽  
Light Emitting ◽  
Fluorescence Studies ◽  
Fluorescence Quantum Yields ◽  
Fluorescent Molecular Probes ◽  
Stokes Shifts

A series of novel blue-light-emitting 2H-imidazo[5,1-a]isoquinolinium chloride derivatives were synthesized by the reaction of isoquinoline with trifluoroacetimidoyl chlorides and isocyanides in dry CH2Cl2 in excellent yields. Fluorescence studies showed that the compounds absorb UV radiation and then emit blue light at about 481 nm with moderate to good fluorescence quantum yields. These compounds also showed high Stokes shifts, and can be used to develop ­ultrasensitive fluorescent molecular probes to study a variety of biological events and processes.

Host-guest complexes of anionic porphyrin sensitizers with cyclodextrins

2002 ◽  
Vol 06 (08) ◽  
pp. 514-526 ◽  
Author(s):  
Jiří Mosinger ◽  
Viktor Kliment ◽  
Jan Sejbal ◽  
Pavel Kubát ◽  
Kamil Lang
Keyword(s):  
Singlet Oxygen ◽  
Specific Binding ◽  
Photophysical Properties ◽  
Bathochromic Shift ◽  
Fluorescence Emission ◽  
Binding Constants ◽  
Quantum Yields ◽  
Hydroxyl Groups ◽  
Triplet States ◽  
Binding Modes

The photodynamic sensitizers zinc(II)- and palladium(II)-5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrins and 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin form 1:1 and/or 1:2 supramolecular complexes with native cyclodextrins (CD) and 2-hydroxypropyl cyclodextrins (hpCD) in aqueous neutral solutions. The formation of these assemblies causes a bathochromic shift of the porphyrin Soret band in the UV-vis spectra and a red shift of the fluorescence emission bands. The binding constants span over three orders of magnitude, from 8.1 × 102 M −1 to 5.4 × 105 M −1 (or 1.1 × 106 M −2) depending on the size of the CD cavity and on the functionalization by adding 2-hydroxypropyl groups. The highest binding constants were obtained for hpβCD and hpγCD. The Nuclear Overhauser spectroscopy signals (ROESY) revealed three binding modes: i) inclusion of the porphyrin 4-sulfonatophenyl or 4-carboxyphenyl groups via the secondary face of βCD and hpβCD with sulfonic or carboxylic groups oriented towards the primary hydroxyl groups. ii) inclusion of the porphyrin groups via the primary face of γCD and hpγCD. iii) non-specific binding of the porphyrin monomers or aggregates on the cyclodextrin exterior. The inclusion host-guest complexation via i) or ii) does not influence the inherent photophysical properties of the monomeric porphyrins such as the quantum yields of fluorescence, the triplet states, and the singlet oxygen formation. Due to the deaggregation effect of cyclodextrins, the inclusion complexes remain efficient supramolecular sensitizers of singlet oxygen even under conditions of extensive aggregation in aqueous solutions.

scholarly journals Fluorescent Biaryl Uracils with C5-Dihydro- and Quinazolinone Heterocyclic Appendages in PNA

Molecules ◽  
2020 ◽  
Vol 25 (8) ◽  
pp. 1995 ◽  
Author(s):  
Ali Heidari ◽  
Arash Ghorbani-Choghamarani ◽  
Maryam Hajjami ◽  
Robert H. E. Hudson
Keyword(s):  
Nucleic Acids ◽  
Dna Sequences ◽  
Photophysical Properties ◽  
Molar Absorptivity ◽  
Transition Metal Catalysts ◽  
Quantum Yields ◽  
Molecular Rotor ◽  
Copper Salts ◽  
Complementary Dna ◽  
Modified Nucleobases

There has been much effort to exploit fluorescence techniques in the detection of nucleic acids. Canonical nucleic acids are essentially nonfluorescent; however, the modification of the nucleobase has proved to be a fruitful way to engender fluorescence. Much of the chemistry used to prepare modified nucleobases relies on expensive transition metal catalysts. In this work, we describe the synthesis of biaryl quinazolinone-uracil nucleobase analogs prepared by the condensation of anthranilamide derivatives and 5-formyluracil using inexpensive copper salts. A selection of modified nucleobases were prepared, and the effect of methoxy- or nitro- group substitution on the photophysical properties was examined. Both the dihydroquinazolinone and quinazolinone modified uracils have much larger molar absorptivity (~4–8×) than natural uracil and produce modest blue fluorescence. The quinazolinone-modified uracils display higher quantum yields than the corresponding dihydroquinazolinones and also show temperature and viscosity dependent emission consistent with molecular rotor behavior. Peptide nucleic acid (PNA) monomers possessing quinazolinone modified uracils were prepared and incorporated into oligomers. In the sequence context examined, the nitro-substituted, methoxy-substituted and unmodified quinazolinone inserts resulted in a stabilization (∆Tm = +4.0/insert; +2.0/insert; +1.0/insert, respectively) relative to control PNA sequence upon hybridization to complementary DNA. All three derivatives responded to hybridization by the “turn-on” of fluorescence intensity by ca. 3-to-4 fold and may find use as probes for complementary DNA sequences.

Importance of Bodipy-based Chemosensors for Cations and Anions in Bioimaging Applications

2020 ◽  
Vol 17 ◽  
Author(s):  
Ahmed Nuri Kursunlu ◽  
Elif Bastug ◽  
Ersin Guler
Keyword(s):  
Photophysical Properties ◽  
Direct Determination ◽  
Spectroscopic Properties ◽  
Selective Detection ◽  
Fluorescent Chemosensors ◽  
Design Strategies ◽  
Online Activity ◽  
Fluorescence Studies ◽  
Bio Imaging ◽  
Living Organisms

Background: Chemosensor compounds are useful for sensitive selective detection of cations and anions with fluorophore groups in an attempt to develop the effective selectivity of the sensors. Although familiar fluorescent sensors utilizing inter-molecular interactions with the cations and anions, an extraordinary endeavor was executed the preparation of fluorescent-based sensor compounds. 4,4-difluoro-4- bora-3a,4a-diaza-s-indacene (Bodipy) and its derivatives were firstly used as an agent in the imaging of biomolecules due to their interesting structures, complexation, and fluorogenic properties. Among the fluorescent chemosensors used for cations and anions, Bodipy-based probes stand out owing to the excellent properties such as sharp emission profile, high stability, etc. In this review, we emphasize the Bodipy-based chemosensor compounds, which have been used to image cations and anions in living cells, because of as well as the biocompatibility and spectroscopic properties. Methods: Research and online content related to chemosensor online activity is reviewed. The advances, sensing mechanisms and design strategies of the fluorophore exploiting selective detection of some cation and anions with Bodipy-based chemosensors are explained. It could be claimed that the using of Bodipy-based chemosensors is very important for cations and anions in bio-imaging applications. Results: Molecular sensors or chemosensors are molecules that show a change can be detected when affected by the analyte. They are capable of producing a measurable signal when they are selective for a particular molecule. Molecular and ion recognition that it is important in biological systems such as enzymes, genes, environment, and chemical fields. Due to the toxic properties of many heavy metal ions, it is of great importance to identify these metals due to their harmful effects on living metabolism and the pollution they create in the environment. This process can be performed with analytical methods based on atomic absorption and emission. The fluorescence methods among chemosensor systems have many advantages such as sensitivity, selectivity, low price, simplicity of using the instrument and direct determination in solutions. The fluorescence studies can be applied at nanomolar concentrations. Conclusion: During a few decades, a lot of Bodipy-based chemosensors for the detection of cations & anions have been investigated in bio-imaging applications. For the Bodipy-based fluorescent chemosensors, the Bodipy derivatives were prepared by different ligand groups for the illumination of the photophysical and photochemical properties. The synthesized Bodipy-based chemosensors have remarkable photophysical properties, such as a high quantum yield, strong molar absorption coefficient etc. Moreover, these chemosensors were successfully implemented on living organisms for the detection of analytes.

Regioselective Oxidative Cross-Coupling Reaction: Synthesis of Imidazo[1,2-a]pyridine Fluorophores

Synthesis ◽  
2021 ◽  
Author(s):  
Xianglong Chu ◽  
Yadi Niu ◽  
Chen Ma ◽  
Xiaodong Wang ◽  
Yunliang Lin ◽  
...  
Keyword(s):  
Photophysical Properties ◽  
Coupling Reaction ◽  
Cross Coupling ◽  
Quantum Yields ◽  
Fluorescence Quantum Yields ◽  
Cross Coupling Reaction ◽  
Color Tunable ◽  
Palladium Catalyzed ◽  
Structure Relationship ◽  
High Fluorescence

AbstractA rapid access to a series of N-heteroarene fluorophores has been developed on the basis of the palladium-catalyzed direct oxidative C–H/C–H coupling of imidazo[1,2-a]pyridines with thiophenes/furans. The photophysical properties–structure relationship was systematically investigated. The resulting N-heteroarene fluorophores present color-tunable emissions (λem: 431–507 nm in CH2Cl2) and high fluorescence quantum yields (up to 91% in CH2Cl2).

scholarly journals The Photostability of Novel Boron Hydride Blue Emitters in Solution and Polystyrene Matrix

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 589
Author(s):  
Jakub Ševčík ◽  
Pavel Urbánek ◽  
Barbora Hanulíková ◽  
Tereza Čapková ◽  
Michal Urbánek ◽  
...  
Keyword(s):  
Thin Films ◽  
Photophysical Properties ◽  
Inorganic Compounds ◽  
Solid Polymer ◽  
Organic Polymer ◽  
Quantum Yields ◽  
Boron Hydride ◽  
Polystyrene Matrix ◽  
Blue Emitters ◽  
Solvent Blends

In recent work, the boron hydride anti-B18H22 was announced in the literature as a new laser dye, and, along with several of its derivatives, its solutions are capable of delivering blue luminescence with quantum yields of unity. However, as a dopant in solid polymer films, its luminescent efficiencies reduce dramatically. Clarification of underlying detrimental effects is crucial for any application and, thus, this contribution makes the initial steps in the use of these inorganic compounds in electrooptical devices based on organic polymer thin films. The photoluminescence behavior of the highly luminescent boron hydrides, anti-B18H22 and 3,3′,4,4′-Et4-anti-B18H18, were therefore investigated. The quantum yields of luminescence and photostabilities of both compounds were studied in different solvents and as polymer-solvent blends. The photophysical properties of both boranes are evaluated and discussed in terms of their solvent-solute interactions using photoluminescence (PL) and NMR spectroscopies. The UV degradability of prepared thin films was studied by fluorimetric measurement. The effect of the surrounding atmosphere, dopant concentration and the molecular structure were assessed.

scholarly journals Photochemical Reactivity of Naphthol-Naphthalimide Conjugates and Their Biological Activity

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3355
Author(s):  
Matija Sambol ◽  
Patricia Benčić ◽  
Antonija Erben ◽  
Marija Matković ◽  
Branka Mihaljević ◽  
...  
Keyword(s):  
Biological Activity ◽  
Rational Design ◽  
Human Cancer ◽  
Photophysical Properties ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Quinone Methide ◽  
Quantum Yields ◽  
Photochemical Reactivity ◽  
Human Cancer Cell Lines

Quinone methide precursors 1a–e, with different alkyl linkers between the naphthol and the naphthalimide chromophore, were synthesized. Their photophysical properties and photochemical reactivity were investigated and connected with biological activity. Upon excitation of the naphthol, Förster resonance energy transfer (FRET) to the naphthalimide takes place and the quantum yields of fluorescence are low (ΦF ≈ 10−2). Due to FRET, photodehydration of naphthols to QMs takes place inefficiently (ΦR ≈ 10−5). However, the formation of QMs can also be initiated upon excitation of naphthalimide, the lower energy chromophore, in a process that involves photoinduced electron transfer (PET) from the naphthol to the naphthalimide. Fluorescence titrations revealed that 1a and 1e form complexes with ct-DNA with moderate association constants Ka ≈ 105–106 M−1, as well as with bovine serum albumin (BSA) Ka ≈ 105 M−1 (1:1 complex). The irradiation of the complex 1e@BSA resulted in the alkylation of the protein, probably via QM. The antiproliferative activity of 1a–e against two human cancer cell lines (H460 and MCF 7) was investigated with the cells kept in the dark or irradiated at 350 nm, whereupon cytotoxicity increased, particularly for 1e (>100 times). Although the enhancement of this activity upon UV irradiation has no imminent therapeutic application, the results presented have importance in the rational design of new generations of anticancer phototherapeutics that absorb visible light.

scholarly journals Binding Properties of a Dinuclear Zinc(II) Salen-Type Molecular Tweezer with a Flexible Spacer in the Formation of Lewis Acid-Base Adducts with Diamines

Inorganics ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 49
Author(s):  
Gabriella Munzi ◽  
Giuseppe Consiglio ◽  
Salvatore Failla ◽  
Santo Di Bella
Keyword(s):  
Lewis Acid ◽  
Degrees Of Freedom ◽  
Binding Constants ◽  
Molecular Structures ◽  
Acid Base ◽  
Binding Properties ◽  
Binding Characteristics ◽  
Fluorescence Studies ◽  
Flexible Spacer ◽  
Molecular Tweezer

In this paper we report the binding properties, by combined 1H NMR, optical absorption, and fluorescence studies, of a molecular tweezer composed of two Zn(salen)-type Schiff-base units connected by a flexible spacer, towards a series of ditopic diamines having a strong Lewis basicity, with different chain length and rigidity. Except for the 1,2-diaminoethane, in all other cases the formation of stable 1:1 Lewis acid-base adducts with large binding constants is demonstrated. For α,ω-aliphatic diamines, binding constants progressively increase with the increasing length of the alkyl chain, thanks to the flexible nature of the spacer and the parallel decreased conformational strain upon binding. Stable adducts are also found even for short diamines with rigid molecular structures. Given their preorganized structure, these latter species are not subjected to loss of degrees of freedom. The binding characteristics of the tweezer have been exploited for the colorimetric and fluorometric selective and sensitive detection of piperazine.

scholarly journals Investigating the Size-Dependent Binding of Pristine nC60 to Bovine Serum Albumin by Multi-Spectroscopic Techniques

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 298
Author(s):  
Shufang Liu ◽  
Shu’e Wang ◽  
Zhanzuo Liu
Keyword(s):  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Bovine Serum ◽  
Binding Constants ◽  
Inner Filter Effect ◽  
Spectroscopic Techniques ◽  
Size Distributions ◽  
Size Dependent ◽  
Filter Effect ◽  
Vis Spectroscopy

The morphology of nanomaterials may affect their interaction with biomacromolecules such as proteins. Previous work has studied the size-dependent binding of pristine nC60 to bovine/human serum albumin using the fluorometric method and found that the fluorescence inner filter effect might affect this interaction. However, if it is necessary to accurately calculate and obtain binding information, the fluorescence inner filter effect should not be ignored. This work aimed to further investigate the effect of the fluorescence inner filter on the interaction between pristine nC60 with different particle sizes (140–160, 120–140, 90–110, 50–70, and 30–50 nm) and bovine serum albumin for a more accurate comprehension of the binding of pristine nC60 to bovine serum albumin. The nC60 nanoparticles with different size distributions used in the experiments were obtained by the solvent displacement and centrifugation method. UV-Vis spectroscopy and fluorescence spectroscopy were used to study the binding of nC60 with different size distributions to bovine serum albumin (BSA) before and after eliminating the fluorescence inner filter effect. The results showed that the fluorescence inner filter effect had an influence on the interaction between nC60 and proteins to some extent, and still did not change the rule of the size-dependent binding of nC60 nanoparticles to BSA. Further studies on the binding parameters (binding constants and the number of binding sites) between them were performed, and the effect of the binding on BSA structures and conformation were also speculated.

scholarly journals Indenopyrans – synthesis and photoluminescence properties

2016 ◽  
Vol 12 ◽  
pp. 825-834 ◽  
Author(s):  
Andreea Petronela Diac ◽  
Ana-Maria Ţepeş ◽  
Albert Soran ◽  
Ion Grosu ◽  
Anamaria Terec ◽  
...  
Keyword(s):  
Solid State ◽  
Emission Band ◽  
Fluorescence Spectra ◽  
Photophysical Properties ◽  
Quantum Yields ◽  
Band Broadening ◽  
Photoluminescence Properties ◽  
Fluorescence Quantum Yields ◽  
Blue Emitters ◽  
Solid State Fluorescence

New indeno[1,2-c]pyran-3-ones bearing different substituents at the pyran moiety were synthesized and their photophysical properties were investigated. In solution all compounds were found to be blue emitters and the trans isomers exhibited significantly higher fluorescence quantum yields (relative to 9,10-diphenylanthracene) as compared to the corresponding cis isomers. The solid-state fluorescence spectra revealed an important red shift of λmax due to intermolecular interactions in the lattice, along with an emission-band broadening, as compared to the solution fluorescence spectra.

Sign in / Sign up

Export Citation Format

Share Document