scholarly journals Effects of the Sintering Process on Nacre-Derived Hydroxyapatite Scaffolds for Bone Engineering

Molecules ◽  
2020 ◽  
Vol 25 (14) ◽  
pp. 3129
Author(s):  
Rohaya Megat Abdul Wahab ◽  
Nurmimie Abdullah ◽  
Shahrul Hisham Zainal Ariffin ◽  
Che Azurahanim Che Abdullah ◽  
Farinawati Yazid
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Nacreous Layer ◽  
Sintering Process ◽  
Micro Computed Tomography ◽  
Native Bone ◽  
Porous Microstructure ◽  
Hydroxyapatite Scaffold ◽  
Osteoblast Markers

A hydroxyapatite scaffold is a suitable biomaterial for bone tissue engineering due to its chemical component which mimics native bone. Electronic states which present on the surface of hydroxyapatite have the potential to be used to promote the adsorption or transduction of biomolecules such as protein or DNA. This study aimed to compare the morphology and bioactivity of sinter and nonsinter marine-based hydroxyapatite scaffolds. Field emission scanning electron microscopy (FESEM) and micro-computed tomography (microCT) were used to characterize the morphology of both scaffolds. Scaffolds were co-cultured with 5 × 104/cm2 of MC3T3-E1 preosteoblast cells for 7, 14, and 21 days. FESEM was used to observe the cell morphology, and MTT and alkaline phosphatase (ALP) assays were conducted to determine the cell viability and differentiation capacity of cells on both scaffolds. Real-time polymerase chain reaction (rtPCR) was used to identify the expression of osteoblast markers. The sinter scaffold had a porous microstructure with the presence of interconnected pores as compared with the nonsinter scaffold. This sinter scaffold also significantly supported viability and differentiation of the MC3T3-E1 preosteoblast cells (p < 0.05). The marked expression of Col1α1 and osteocalcin (OCN) osteoblast markers were also observed after 14 days of incubation (p < 0.05). The sinter scaffold supported attachment, viability, and differentiation of preosteoblast cells. Hence, sinter hydroxyapatite scaffold from nacreous layer is a promising biomaterial for bone tissue engineering.

scholarly journals Heidelberg-mCT-Analyzer: a novel method for standardized microcomputed-tomography-guided evaluation of scaffold properties in bone and tissue research

2015 ◽  
Vol 2 (11) ◽  
pp. 150496 ◽  
Author(s):  
Fabian Westhauser ◽  
Christian Weis ◽  
Melanie Hoellig ◽  
Tyler Swing ◽  
Gerhard Schmidmaier ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Characteristic Parameter ◽  
Micro Computed Tomography ◽  
Mineral Density ◽  
Independent Analysis ◽  
Scaffold Properties

Bone tissue engineering and bone scaffold development represent two challenging fields in orthopaedic research. Micro-computed tomography (mCT) allows non-invasive measurement of these scaffolds’ properties in vivo . However, the lack of standardized mCT analysis protocols and, therefore, the protocols’ user-dependency make interpretation of the reported results difficult. To overcome these issues in scaffold research, we introduce the Heidelberg-mCT-Analyzer. For evaluation of our technique, we built 10 bone-inducing scaffolds, which underwent mCT acquisition before ectopic implantation (T0) in mice, and at explantation eight weeks thereafter (T1). The scaffolds’ three-dimensional reconstructions were automatically segmented using fuzzy clustering with fully automatic level-setting. The scaffold itself and its pores were then evaluated for T0 and T1. Analysing the scaffolds’ characteristic parameter set with our quantification method showed bone formation over time. We were able to demonstrate that our algorithm obtained the same results for basic scaffold parameters (e.g. scaffold volume, pore number and pore volume) as other established analysis methods. Furthermore, our algorithm was able to analyse more complex parameters, such as pore size range, tissue mineral density and scaffold surface. Our imaging and post-processing strategy enables standardized and user-independent analysis of scaffold properties, and therefore is able to improve the quantitative evaluations of scaffold-associated bone tissue-engineering projects.

scholarly journals Assessment of the Mechanical and Thermal Properties of Injection-Molded Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/Hydroxyapatite Nanoparticles Parts for Use in Bone Tissue Engineering

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1389 ◽  
Author(s):  
Juan Ivorra-Martinez ◽  
Luis Quiles-Carrillo ◽  
Teodomiro Boronat ◽  
Sergio Torres-Giner ◽  
José A. Covas
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Mechanical And Thermal Properties ◽  
Bone Reconstruction ◽  
Hydroxyapatite Nanoparticles ◽  
Native Bone ◽  
Melt Compounding ◽  
Injection Molded ◽  
Thermal Stability Of

In the present study, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] was reinforced with hydroxyapatite nanoparticles (nHA) to produce novel nanocomposites for potential uses in bone reconstruction. Contents of nHA in the 2.5–20 wt % range were incorporated into P(3HB-co-3HHx) by melt compounding and the resulting pellets were shaped into parts by injection molding. The addition of nHA improved the mechanical strength and the thermomechanical resistance of the microbial copolyester parts. In particular, the addition of 20 wt % of nHA increased the tensile (Et) and flexural (Ef) moduli by approximately 64% and 61%, respectively. At the highest contents, however, the nanoparticles tended to agglomerate, and the ductility, toughness, and thermal stability of the parts also declined. The P(3HB-co-3HHx) parts filled with nHA contents of up to 10 wt % matched more closely the mechanical properties of the native bone in terms of strength and ductility when compared with metal alloys and other biopolymers used in bone tissue engineering. This fact, in combination with their biocompatibility, enables the development of nanocomposite parts to be applied as low-stress implantable devices that can promote bone reconstruction and be reabsorbed into the human body.

Laser Surface Engineering of Hierarchy Hydroxyapatite Aerogel for Bone Tissue Engineering

2017 ◽  
Author(s):  
Pedram Parandoush ◽  
Hanxiong Fan ◽  
Xiaolei Song ◽  
Dong Lin
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Laser Processing ◽  
Laser Energy ◽  
Tissue Growth ◽  
Human Bone ◽  
Dense Layer ◽  
Freeze Casting ◽  
Porous Microstructure

Bioceramics with porous microstructure has attracted intense attention in tissue engineering due to tissue growth facilitation in the human body. In the present work, a novel manufacturing process for producing hydroxyapatite (HA) aerogels with a high density shell inspired by human bone microstructure is proposed for bone tissue engineering applications. This method combines laser processing and traditional freeze casting in which HA aerogel is prepared by freeze casting and aqueous suspension prior to laser processing of the aerogel surface with a focused CO2 laser beam that forms a dense layer on top of the porous microstructure. Using the proposed method, HA aerogel with dense shell was successfully prepared with a microstructure similar to human bone. The effect of laser process parameters on surface and cross-sectional morphology and microstructure was investigated in order to obtain optimum parameters and have a better understanding of the process. Low laser energy resulted in fragile surface with defects and cracks due to low temperature and inability of laser to fully melt the surface while high laser energy caused thermal damage both to surface and microstructure. The range of 40–45 W laser power, 5 mm/s scanning speed, spot size of 1 mmm and 50 % overlap in laser scanning the surface yielded the best surface morphology and micro structure in our experiments.

Development of Novel Biodegradable Amino Acid Ester Based Polyphosphazene– Hydroxyapatite Composites for Bone Tissue Engineering

2004 ◽  
Vol 845 ◽  
Author(s):  
Swaminathan Sethuraman ◽  
Lakshmi S. Nair ◽  
Anurima Singh ◽  
Jared D Bender ◽  
Yaser E. Greish ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Amino Acid Ester ◽  
Toxic Chemicals ◽  
Mineral Component ◽  
Physiological Temperature ◽  
Calcium Phosphate Cements ◽  
Porous Microstructure

ASTRACT:Hydroxyapatite formed from low temperature setting calcium phosphate cements (CPC) are currently been used for various orthopaedic applications. CPCs are attractive candidates for the development of scaffolds for bone tissue engineering, since they are moldable, resorbable, set at physiological temperature without the use of toxic chemicals, and can be processed in an operating room setting. However they may have mechanical disadvantages which seriously limit them to non-load bearing orthopaedic applications. The aim of the present study was to develop composites from polyphosphazenes and calcium deficient hydroxyapatite precursors to form poorly crystalline hydroxyapatite-polymer composites. Composites were formed from calcium deficient hydroxyapatite precursors (Ca/P – 1.5, 1.6) and biodegradable polyphosphazenes, poly[bis(ethyl alanato)phosphazene] (PNEA) and poly[(50%ethyl alanato) (50%methyl phenoxy)phosphazene] (PNEA50mPh50) at physiological temperature. The results demonstrated that poorly crystalline hydroxyapatite that resembled the mineral component of bone was formed in the presence of biodegradable polyphosphazenes. The surface morphology of all the four composites was identical with a porous microstructure. The composites supported the adhesion and proliferation of osteoblast like MC3T3-E1 cells making them potential candidates for bone tissue engineering.

The efficacy of polycaprolactone/hydroxyapatite scaffold in combination with mesenchymal stem cells for bone tissue engineering

2015 ◽  
Vol 104 (1) ◽  
pp. 264-271 ◽  
Author(s):  
Boontharika Chuenjitkuntaworn ◽  
Thanaphum Osathanon ◽  
Nunthawan Nowwarote ◽  
Pitt Supaphol ◽  
Prasit Pavasant
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Hydroxyapatite Scaffold

Development of a biomimetic collagen-hydroxyapatite scaffold for bone tissue engineering using a SBF immersion technique

2009 ◽  
Vol 90B (2) ◽  
pp. 584-591 ◽  
Author(s):  
Amir A. Al-Munajjed ◽  
Niamh A. Plunkett ◽  
John P. Gleeson ◽  
Tim Weber ◽  
Christian Jungreuthmayer ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Immersion Technique ◽  
Hydroxyapatite Scaffold

Fish scale derived hydroxyapatite scaffold for bone tissue engineering

2016 ◽  
Vol 121 ◽  
pp. 112-124 ◽  
Author(s):  
B Mondal ◽  
S. Mondal ◽  
A. Mondal ◽  
N. Mandal
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Fish Scale ◽  
Hydroxyapatite Scaffold
Sign in / Sign up

Export Citation Format

Share Document