scholarly journals Anodized Biomedical Stainless-Steel Mini-Implant for Rapid Recovery in a Rabbit Model

Metals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1575
Author(s):  
Yung-Chieh Cho ◽  
Wei-Chiang Hung ◽  
Wen-Chien Lan ◽  
Takashi Saito ◽  
Bai-Hung Huang ◽  
...  
Keyword(s):  
Cell Culture ◽  
Stainless Steel ◽  
Photoelectron Spectroscopy ◽  
Recovery Period ◽  
Rabbit Model ◽  
Control Sample ◽  
Electrochemical Anodization ◽  
X Ray ◽  
Cell Culture Assay

The study aimed to analyze the recovery period of the anodized 316L biomedical stainless steel (BSS) mini-implant through its implantation on femur of rabbit model. The 316L BSS mini-implant was modified by an electrochemical anodization approach with different voltages. The anodized samples were characterized via field-emission scanning electron microscopy, X-ray diffractometry, and X-ray photoelectron spectroscopy. The biocompatibility was assessed by cell culture assay. The anodized mini-implant was implanted on rabbit’s femur then evaluated histologically after 4 and 8 weeks. Analytical results indicated that the topography of the anodized mini-implant at 5 V for 5 min consisted of a dual (micro/nano) porous structure. Oxide film of Cr2O3 was formed on the surface of anodized mini-implant after anodizing with 5 V for 5 min. In vitro cell culture assay revealed that fibroblast cells (NIH-3T3) on the anodized samples were more firmly attached as compared with the control sample. Moreover, histological analysis demonstrated that the anodized mini-implant improved bone recovering at 4 weeks after implantation. Thus, this study suggests that the anodized 316L BSS mini-implant could be a potential choice as anchorage device for effective and efficient orthodontic treatment.

scholarly journals Surface Characteristics and Cell Adhesion Behaviors of the Anodized Biomedical Stainless Steel

2020 ◽  
Vol 10 (18) ◽  
pp. 6275
Author(s):  
Heng-Jui Hsu ◽  
Chia-Yu Wu ◽  
Bai-Hung Huang ◽  
Chi-Hsun Tsai ◽  
Takashi Saito ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cell Culture ◽  
Stainless Steel ◽  
Cell Adhesion ◽  
Oxide Layer ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
In Vitro Cell Culture ◽  
Cell Culture Assay

In this study, an electrochemical anodizing method was applied as surface modification of the 316L biomedical stainless steel (BSS). The surface properties, microstructural characteristics, and biocompatibility responses of the anodized 316L BSS specimens were elucidated through scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, and in vitro cell culture assay. Analytical results revealed that the oxide layer of dichromium trioxide (Cr2O3) was formed on the modified 316L BSS specimens after the different anodization modifications. Moreover, a dual porous (micro/nanoporous) topography can also be discovered on the surface of the modified 316L BSS specimens. The microstructure of the anodized oxide layer was composed of amorphous austenite phase and nano-Cr2O3. Furthermore, in vitro cell culture assay also demonstrated that the osteoblast-like cells (MG-63) on the anodized 316L BSS specimens were completely adhered and covered as compared with the unmodified 316L BSS specimen. As a result, the anodized 316L BSS with a dual porous (micro/nanoporous) oxide layer has great potential to induce cell adhesion and promote bone formation.

scholarly journals Characterization and In Vitro Studies of Low Reflective Magnetite (Fe3O4) Thin Film on Stainless Steel 420A Developed by Chemical Method

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1145
Author(s):  
Reghuraj Aruvathottil Rajan ◽  
Kaiprappady Kunchu Saju ◽  
Ritwik Aravindakshan
Keyword(s):  
Thin Film ◽  
Stainless Steel ◽  
Photoelectron Spectroscopy ◽  
Optimization Techniques ◽  
Surgical Instruments ◽  
Taguchi Optimization ◽  
X Ray ◽  
Average Percentage ◽  
Morphological Studies

Stainless steel has been the most demanded material for surgical utensil manufacture due to superior mechanical properties, sufficient wear, and corrosion resistance. Surgical grade 420A stainless steel is extensively used for producing sophisticated surgical instruments. Since these instruments are used under bright light conditions prevalent in operation theatres, the reflection from the material is significant which causes considerable strain to the eye of the surgeon. Surgical instruments with lower reflectance will be more efficient under these conditions. A low reflective thin -film coating has often been suggested to alleviate this inadmissible difficulty. This paper reports the development of an optimum parametric low reflective magnetite coating on the surface of SS 420A with a black color using chemical hot alkaline conversion coating technique and its bioactivity studies. Coating process parameters such as coating time, bath temperature, and chemical composition of bath are optimized using Taguchi optimization techniques. X-ray photoelectron spectroscopy (XPS) analysis was used to identify the composition of elements and the chemical condition of the developed coating. Surface morphological studies were accomplished with a scanning electron microscope (SEM). When coupled with an energy-dispersive X-ray analysis (EDAX), compositional information can also be collected simultaneously. Invitro cytotoxicity tests, corrosion behavior, the effect of sterilization temperature on adhesion property, and average percentage reflectance (R) of the developed coating have also been evaluated. These results suggest adopting the procedure for producing low reflective conversion coatings on minimally invasive surgical instruments produced from medical grade 420A stainless steel.

scholarly journals Synthesis, characterization and in vitro cytotoxicity study of Co and Ni ferrite nanoparticles prepared by sol-gel method

2021 ◽  
Vol 3 (7) ◽  
Author(s):  
Alexandre Pancotti ◽  
Dener Pereira Santos ◽  
Dielly Oliveira Morais ◽  
Mauro Vinícius de Barros Souza ◽  
Débora R. Lima ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Test Sample ◽  
In Vitro Cytotoxicity ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Crystallite Sizes

AbstractIn this study, we report the synthesis and characterization of NiFe2O4 and CoFe2O4 nanoparticles (NPs) which are widely used in the biomedical area. There is still limited knowledge how the properties of these materials are influenced by different chemical routes. In this work, we investigated the effect of heat treatment over cytotoxicity of cobalt and niquel ferrites NPs synthesized by sol-gel method. Then the samples were studied using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), Fourier Transform Infrared Spectroscopy Analysis (FTIR), and X-ray fluorescence (XRF). The average crystallite sizes of the particles were found to be in the range of 20–35 nm. The hemocompatibility (erythrocytes and leukocytes) was checked. Cytotoxicity results were similar to those of the control test sample, therefore suggesting hemocompatibility of the tested materials.

Interaction of Bovine Serum Albumin and Lysozyme with Stainless Steel Studied by Time-of-Flight Secondary Ion Mass Spectrometry and X-ray Photoelectron Spectroscopy

Langmuir ◽  
2012 ◽  
Vol 28 (47) ◽  
pp. 16306-16317 ◽  
Author(s):  
Yolanda S. Hedberg ◽  
Manuela S. Killian ◽  
Eva Blomberg ◽  
Sannakaisa Virtanen ◽  
Patrik Schmuki ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Stainless Steel ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Photoelectron Spectroscopy ◽  
Bovine Serum ◽  
Secondary Ion Mass Spectrometry ◽  
Time Of Flight ◽  
X Ray ◽  
Secondary Ion

scholarly journals Lactoferrin/Calcium Phosphate-Modified Porous Ti by Biomimetic Mineralization: Effective Infection Prevention and Excellent Osteoinduction

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 992
Author(s):  
Song Chen ◽  
Yuanli He ◽  
Linna Zhong ◽  
Wenjia Xie ◽  
Yiyuan Xue ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Biomimetic Mineralization ◽  
Matrix Mineralization ◽  
X Ray ◽  
Porous Ti ◽  
Potential Applications ◽  
Modification Of Titanium

The surface modification of titanium (Ti) can enhance the osseointegration and antibacterial properties of implants. In this study, we modified porous Ti discs with calcium phosphate (CaP) and different concentrations of Lactoferrin (LF) by biomimetic mineralization and examined their antibacterial effects and osteogenic bioactivity. Firstly, scanning electron microscopy (SEM), the fluorescent tracing method, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and the releasing kinetics of LF were utilized to characterize the modified Ti surface. Then, the antibacterial properties against S. sanguis and S. aureus were investigated. Finally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell differentiation, extracellular matrix mineralization, and cytotoxicity. The results showed that the porous Ti discs were successfully modified with CaP and LF, and that the LF-M group (200 μg/mL LF in simulated body fluid) could mildly release LF under control. Further, the LF-M group could effectively inhibit the adhesion and proliferation of S. sanguis and S. aureus and enhance the osteogenic differentiation in vitro with a good biocompatibility. Consequently, LF-M-modified Ti may have potential applications in the field of dental implants to promote osseointegration and prevent the occurrence of peri-implantitis.

scholarly journals Gradient Chitosan Hydrogels Modified with Graphene Derivatives and Hydroxyapatite: Physiochemical Properties and Initial Cytocompatibility Evaluation

2020 ◽  
Vol 21 (14) ◽  
pp. 4888
Author(s):  
Karolina Kosowska ◽  
Patrycja Domalik-Pyzik ◽  
Małgorzata Sekuła-Stryjewska ◽  
Sylwia Noga ◽  
Joanna Jagiełło ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Mechanical Analysis ◽  
Biological Properties ◽  
Human Umbilical Cord ◽  
Tissue Engineering Scaffolds ◽  
X Ray ◽  
Chitosan Matrix ◽  
Graphene Derivatives

In this study, we investigated preparation of gradient chitosan-matrix hydrogels through a novel freezing–gelling–thawing method. The influence of three types of graphene family materials (GFM), i.e., graphene oxide (GO), reduced graphene oxide (rGO), and poly(ethylene glycol) grafted graphene oxide (GO-PEG), as well as hydroxyapatite (HAp) on the physicochemical and biological properties of the composite hydrogels was examined in view of their potential applicability as tissue engineering scaffolds. The substrates and the hydrogel samples were thoroughly characterized by X-ray photoelectron spectroscopy, X-ray diffractometry, infrared spectroscopy, digital and scanning electron microscopy, rheological and mechanical analysis, in vitro chemical stability and bioactivity assays, as well as initial cytocompatibility evaluation with human umbilical cord Wharton’s jelly mesenchymal stem cells (hUC-MSCs). We followed the green-chemistry approach and avoided toxic cross-linking agents, using instead specific interactions of our polymer matrix with tannic acid, non-toxic physical cross-linker, and graphene derivatives. It was shown that the most promising are the gradient hydrogels modified with GO-PEG and HAp.

scholarly journals Silica-Copper Oxide Composite Thin Films as Solar Selective Coatings Prepared by Dipping Sol Gel

2008 ◽  
Vol 2008 ◽  
pp. 1-5 ◽  
Author(s):  
E. Barrera-Calva ◽  
J. Méndez-Vivar ◽  
M. Ortega-López ◽  
L. Huerta-Arcos ◽  
J. Morales-Corona ◽  
...  
Keyword(s):  
Thin Films ◽  
Stainless Steel ◽  
Copper Oxide ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Silica Matrix ◽  
Composite Thin Films ◽  
X Ray ◽  
Molar Ratios ◽  
Steel Substrates

Silica-copper oxide (silica-CuO) composite thin films were prepared by a dipping sol-gel route using ethanolic solutions comprised TEOS and a copper-propionate complex. Sols with different TEOS/Cu-propionate (Si/Cu) molar ratios were prepared and applied on stainless steel substrates using dipping process. During the annealing process, copper-propionate complexes developed into particulate polycrystalline CuO dispersed in a partially crystallized silica matrix, as indicated by the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. The gel thermal analysis revealed that the prepared material might be stable up to400°C. The silica-CuO/stainless steel system was characterized as a selective absorber surface and its solar selectivity parameters, absorptance (α), and emittance (ε) were evaluated from UV-NIR reflectance data. The solar parameters of such a system were mostly affected by the thickness and phase composition of theSiO2-CuO film. Interestingly, the best solar parameters (α= 0.92 andε= 0.2) were associated to the thinnest films, which comprised a CuO-Cu2Omixture immersed in the silica matrix, as indicated by XPS.

211 LACTOFERRIN INHIBITS BOVINE HERPESVIRUS-1 IN CELL CULTURE AND ALLOWS NORMAL DEVELOPMENT OF IN VITRO-PRODUCED EMBRYOS

2006 ◽  
Vol 18 (2) ◽  
pp. 213 ◽  
Author(s):  
M. Givens ◽  
M. Marley ◽  
P. Galik ◽  
K. Riddell ◽  
D. Stringfellow
Keyword(s):  
Cell Culture ◽  
Cell Count ◽  
Bovine Milk ◽  
Control Sample ◽  
Bovine Herpesvirus ◽  
Blastocyst Development ◽  
Bovine Herpesvirus 1 ◽  
Herpesvirus 1 ◽  
In Vitro Embryo Production

Lactoferrin is an iron-binding glycoprotein found in milk, saliva, tears, and other exocrine secretions. It is known to have in vitro antiviral effects against human, feline, and canine herpesviruses. In addition, lactoferrin is known to be safe in cell culture. Bovine herpesvirus-1 (BHV-1) is a likely contaminant of in vitro embryo production. Further, trypsin treatment is not completely effective in removing the virus from these embryos. We hypothesized that a nontoxic concentration of lactoferrin might prevent replication of BHV-1 within in vitro embryo production systems. Thus, the specific objectives of this research were to determine if lactoferrin from bovine milk would inhibit BHV-1 in cell culture and to determine if in vitro-produced embryos could develop normally when cultured in lactoferrin. Two-fold dilutions of lactoferrin (from 10 to 0.625 mg/mL) were added to Madin Darby bovine kidney cells, followed in 15 min by the addition 104 PFU/mL of BHV-1 (Colorado strain). Samples of cell lysate were taken at Day 2 and virus was quantified by plaque assay. The percent of virus inhibited by the antiviral agent at each concentration was determined by comparison to equivalent samples from temporal control cultures in which no compound was added before or after inoculation (Percentage of virus inhibited = [Quantity of virus in the control sample - Quantity of virus in the compound sample]/Quantity of virus in the control sample � 100). Next, the effect of lactoferrin was determined on in vitro-produced embryos. Cumulus oocyte complexes were received from an abattoir, matured in transit, placed in fertilization drops for 6 h, and then placed in culture drops containing lactoferrin (10, 5, and 2.5 mg/mL). At Day 3.5, embryos > 4 cell stage were placed into fresh culture drops containing lactoferrin. On Day 7.5, blastocyst development was noted and the developed embryos were stained to count viable cells. Blastocyst development rate and nucleated cell count of the treated embryos were compared to those of the controls using Chi square test, and ANOVA and Tukey-Kramer HSD, respectively. Lactoferrin (10 mg/mL) inhibited 2 to 5 logs of virus. At concentrations of 5 and 2.5 mg/mL, 1 to 3 logs of virus were inhibited, and concentrations of 1.25 and 0.625 mg/mL inhibited 0 to 2 logs of virus. Lactoferrin did not affect the nucleated cell count of the treated embryos. In addition, unlike 10 and 5 mg/mL, 2.5 mg/mL of lactoferrin did not affect blastocyst development. These preliminary results indicate that lactoferrin from bovine milk can significantly inhibit BHV-1 in cell culture. Furthermore, supplementation of in vitro culture with 2.5 mg/mL of lactoferrin does not affect blastocyst development or cell count of in vitro-produced embryos.

Electropolishing of 316L Stainless Steel Using Sulfuric Acid-Free Electrolyte

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Wei Han ◽  
Fengzhou Fang
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Phosphoric Acid ◽  
Photoelectron Spectroscopy ◽  
316L Stainless Steel ◽  
Electrochemical Analysis ◽  
Limiting Current ◽  
Plateau Region ◽  
X Ray

Abstract The study is to investigate the electropolishing characteristics of 316L stainless steel in a sulfuric acid-free electrolyte of phosphoric acid and glycerol and to explore the possibility of using this eco-friendly electrolyte instead of the widely used sulfuric acid-based electrolyte. The influences of process parameters on polishing effects and the corrosion resistance of electropolished samples are investigated. The experimental results show that the electropolishing temperature and acid concentration are directly related to the mass transport mechanism in the limiting current plateau region. The grain boundaries of workpiece were electrochemically dissolved faster than the grain themselves at the beginning of the electropolishing process because they are more reactive than grains. Moreover, the conventional sulfuric—phosphoric acid electrolyte was also used to electropolish the 316L stainless steel, and the electropolished surfaces were compared with the sulfuric acid-free electrolyte proposed in this study. When the sulfuric acid-free electrolyte was used to electropolish the 316L stainless steel, the X-ray photoelectron spectroscopy (XPS) analysis shows that atomic Cr/Fe ratio of 316L stainless steel was increased from 0.802 to 1.909 after electropolishing process in the sulfuric acid-free electrolyte of phosphoric acid and glycerol. The corrosion resistance of the electropolished 316L stainless steel is studied using electrochemical analysis, and the results are verified experimentally.

scholarly journals The Effects of Ti Additions and Deposition Parameters on the Structural and Mechanical Properties of Stainless Steel-Nitride Thin Films

Coatings ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 329
Author(s):  
Faisal I. Alresheedi ◽  
James E. Krzanowski
Keyword(s):  
Stainless Steel ◽  
Photoelectron Spectroscopy ◽  
Lower Surface ◽  
Grain Structure ◽  
Composition Analysis ◽  
Transition Metal Nitrides ◽  
N Content ◽  
X Ray ◽  
Deposition Parameters ◽  
Stainless Steel Coatings

This study examines the structure and properties of stainless steel coatings deposited to incorporate large concentrations of nitrogen along with varying amounts of titanium. Deposition was carried out using magnetron co-sputtering of stainless steel and titanium from separate targets in a mixed Ar/N2 gas atmosphere. Composition analysis by X-ray photoelectron spectroscopy showed that while films with up to 4 at.% Ti exhibited little change in nitrogen content (compared to films deposited without Ti) and remained sub-stoichiometric with respect to N content. Films with 7–8 at.% Ti had a higher N level and further increasing the Ti level to 11–12 at.% resulted in stoichiometric N levels. X-ray diffraction showed that the films all had a nominally FCC structure with no additional phases. However, the peak locations for the (111) and (200) reflections indicated a distorted lattice characteristic of the S-phase, with calculated c/a values ranging from 1.007 to 1.033. The Ti additions, along with the corresponding increase in N content, helped reduce the extent of lattice distortion. The film microstructure of the higher (11–12 at.%) Ti films also showed higher density, lower surface roughness, and a finer grain structure. As a result, these films had a higher hardness compared to the sub-stoichiometric films, with hardness levels in the range of 18–23 GPa, typical of transition metal nitrides coatings.

Sign in / Sign up

Export Citation Format

Share Document