scholarly journals Lactoferrin/Calcium Phosphate-Modified Porous Ti by Biomimetic Mineralization: Effective Infection Prevention and Excellent Osteoinduction

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 992
Author(s):  
Song Chen ◽  
Yuanli He ◽  
Linna Zhong ◽  
Wenjia Xie ◽  
Yiyuan Xue ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Biomimetic Mineralization ◽  
Matrix Mineralization ◽  
X Ray ◽  
Porous Ti ◽  
Potential Applications ◽  
Modification Of Titanium

The surface modification of titanium (Ti) can enhance the osseointegration and antibacterial properties of implants. In this study, we modified porous Ti discs with calcium phosphate (CaP) and different concentrations of Lactoferrin (LF) by biomimetic mineralization and examined their antibacterial effects and osteogenic bioactivity. Firstly, scanning electron microscopy (SEM), the fluorescent tracing method, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and the releasing kinetics of LF were utilized to characterize the modified Ti surface. Then, the antibacterial properties against S. sanguis and S. aureus were investigated. Finally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell differentiation, extracellular matrix mineralization, and cytotoxicity. The results showed that the porous Ti discs were successfully modified with CaP and LF, and that the LF-M group (200 μg/mL LF in simulated body fluid) could mildly release LF under control. Further, the LF-M group could effectively inhibit the adhesion and proliferation of S. sanguis and S. aureus and enhance the osteogenic differentiation in vitro with a good biocompatibility. Consequently, LF-M-modified Ti may have potential applications in the field of dental implants to promote osseointegration and prevent the occurrence of peri-implantitis.

Growth of Calcium Phosphate on Poled Piezoelectric Poly-L-lactic Acid Membrane by a Biomimetic Method

2007 ◽  
Vol 330-332 ◽  
pp. 703-706
Author(s):  
Chun Peng Huang ◽  
Dong Hua Guan ◽  
Kun Tian ◽  
Xin Min Chen ◽  
Lin Niu ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Electric Field ◽  
Photoelectron Spectroscopy ◽  
Charged Surface ◽  
X Ray ◽  
Charged Surfaces ◽  
Before And After ◽  
Dc Electric Field ◽  
Biomimetic Method

The bioactivity of poled piezoelectric PLLA membrane was investigated by studying the calcium phosphate formation in vitro using a biomimetic method. Samples (φ10mm) were poled under DC electric field of 8~l0kV/cm at 70°C for 30 min followed by cooling under the electric field. Surface chemistry of the samples before and after poling treatment was studied by X-ray photoelectron spectroscopy (XPS). Poled/unpoled samples were immersed in supersaturated calcification solution (SCS) for periods up to 24 h (36.5°C). The surface morphology and composition of the soaked samples were evaluated by using scanning electron microscope (SEM) and X-ray diffraction analysis (XRD). Poled samples showed two different charged surfaces, negatively-charged surface (N-PLLA) and positively-charged surface (P-PLLA). On the N-PLLA surfaces, SEM together with XRD showed a gradually formed calcium phosphate (Ca-P), while no obvious Ca-P on either P-PLLA or unpoled samples was observed. This study demonstrated that poled piezoelectric PLLA substrates induce substantially higher level of Ca-P formation than electrically neutral substrates and only N-PLLA, however, can improve Ca-P formation after immersion in SCS.

scholarly journals Synthesis, characterization and in vitro cytotoxicity study of Co and Ni ferrite nanoparticles prepared by sol-gel method

2021 ◽  
Vol 3 (7) ◽  
Author(s):  
Alexandre Pancotti ◽  
Dener Pereira Santos ◽  
Dielly Oliveira Morais ◽  
Mauro Vinícius de Barros Souza ◽  
Débora R. Lima ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Test Sample ◽  
In Vitro Cytotoxicity ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Crystallite Sizes

AbstractIn this study, we report the synthesis and characterization of NiFe2O4 and CoFe2O4 nanoparticles (NPs) which are widely used in the biomedical area. There is still limited knowledge how the properties of these materials are influenced by different chemical routes. In this work, we investigated the effect of heat treatment over cytotoxicity of cobalt and niquel ferrites NPs synthesized by sol-gel method. Then the samples were studied using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), Fourier Transform Infrared Spectroscopy Analysis (FTIR), and X-ray fluorescence (XRF). The average crystallite sizes of the particles were found to be in the range of 20–35 nm. The hemocompatibility (erythrocytes and leukocytes) was checked. Cytotoxicity results were similar to those of the control test sample, therefore suggesting hemocompatibility of the tested materials.

Fabrication and evaluation of calcium phosphate cement scaffold with controlled internal channel architecture and complex shape

2007 ◽  
Vol 221 (8) ◽  
pp. 951-958 ◽  
Author(s):  
X Li ◽  
D Li ◽  
B Lu ◽  
L Wang ◽  
Z Wang
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Calcium Phosphate Cement ◽  
Complex Shape ◽  
X Ray Diffraction ◽  
X Ray ◽  
Precise Control ◽  
Internal Channel ◽  
Channel Architecture

The ability to have precise control over internal channel architecture, porosity, and external shape is essential for tissue engineering. The feasibility of using indirect stereo-lithography (SL) to produce scaffolds from calcium phosphate cement materials for bone tissue engineering has been investigated. The internal channel architecture of the scaffolds was created by removal of the negative resin moulds made with SL. Scanning electron microscopy (SEM) showed highly open, well-interconnected channel architecture. The X-ray diffraction examination revealed that the hydroxyapatite phase formed at room temperature in the cement was basically stable up to 850 °C. There was no phase decomposition of hydroxyapatite, although the crystallinity and grain size were different. The ability of resulting structure to support osteoblastic cells culture was tested in vitro. Cells were evenly distributed on exterior surfaces and grew into the internal channels of scaffolds. To exploit the ability of this technique, anatomically shaped femoral supracondylar scaffolds with 300-800 μm interconnected channels were produced and characterized.

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Mesenchymal Stem Cell Response to Surface Altered Porous Ti

2015 ◽  
Vol 638 ◽  
pp. 67-72
Author(s):  
Ana Maria Salantiu ◽  
Florin Popa ◽  
Petru Pascuta ◽  
Olga Soritau ◽  
Noemi Dirzu ◽  
...  
Keyword(s):  
Stem Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemically Modified ◽  
Porous Ti ◽  
Average Porosity ◽  
Ft Ir ◽  
Cell Testing ◽  
Scanning Electron

This work aims to investigate the influence of surface conditioning of porous Ti for enhancing its biological activity, as assessed by in vitro stem cell testing. Porous Ti samples with an average porosity of 32% were processed by Powder Metallurgy with dextrin as a space holder. The samples were subjected to H2O2 treatment to form an enhanced TiO2 film, followed by a heat treatment at 400°C and 600°C aiming to the crystallization of the as-formed amorphous titanium oxide. Samples characterization was performed by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and X-Ray Diffraction (XRD). The treated surfaces revealed to be made of both anatase and rutile TiO2, with groove–shaped structure and cracks on the surface of the TiO2 film. The intrinsic biocompatibility of the chemically modified porous Ti surfaces was assessed in vitro. In our cell culture tests, stem cells were found to attach and proliferate better on the chemically treated Ti surfaces compared to the control untreated Ti surfaces.

Evidence of calcium phosphate supersaturation in the loop of Henle

1996 ◽  
Vol 270 (4) ◽  
pp. F604-F613 ◽  
Author(s):  
J. R. Asplin ◽  
N. S. Mandel ◽  
F. L. Coe
Keyword(s):  
Calcium Phosphate ◽  
Calcium Concentration ◽  
Loop Of Henle ◽  
X Ray ◽  
Ion Interactions ◽  
Collecting Ducts ◽  
Phosphate Phase ◽  
Dietary Phosphate ◽  
Calcium Phosphate Phase

We have used published rat micropuncture data to construct a matrix of ion concentrations along the rat nephron. With an iterative computer model of known ion interactions, we calculated relative supersaturation ratios in all nephron segments. The collecting ducts and urine showed expected supersaturation with stone-forming salts. Fluid in the thin segment of the loop of Henle may be supersaturated with calcium carbonate and calcium phosphate under certain conditions. Because calculations cannot predict the actual course of crystallization, we made solutions to mimic, in vitro, presumed conditions in the loop of Henle. The solid phases that formed were analyzed by X-ray powder diffraction, electron microprobe, and infrared spectroscopy. All samples were identified as poorly crystallized or immature apatite. The descending limb of Henle's loop creates a unique condition as it extracts water but not sodium, bicarbonate, calcium, or phosphate, giving a calcium concentration at the bend of 3 mM, pH 7.4, and a phosphate concentration that varies from 0.8 to 48 mM, depending on parathyroid hormone and dietary phosphate. We conclude that conditions in the thin segment potentially could create a solid calcium phosphate phase, which may initiate nucleation of calcium oxalate salts in the collecting ducts, potentiating nephrolithiasis and nephrocalcinosis.

scholarly journals Fabrication of Flexible, Lightweight, Magnetic Mushroom Gills and Coral-Like MXene–Carbon Nanotube Nanocomposites for EMI Shielding Application

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 519 ◽  
Author(s):  
Kanthasamy Raagulan ◽  
Ramanaskanda Braveenth ◽  
Lee Ro Lee ◽  
Joonsik Lee ◽  
Bo Kim ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Photoelectron Spectroscopy ◽  
Electromagnetic Interference ◽  
Sodium Dodecyl ◽  
Spray Coating ◽  
Emi Shielding ◽  
X Ray ◽  
Good Thermal Stability ◽  
Potential Applications ◽  
Oxidized Carbon

MXenes, carbon nanotubes, and nanoparticles are attractive candidates for electromagnetic interference (EMI) shielding. The composites were prepared through a filtration technique and spray coating process. The functionalization of non-woven carbon fabric is an attractive strategy. The prepared composite was characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and Raman spectroscopy. The MXene-oxidized carbon nanotube-sodium dodecyl sulfate composite (MXCS) exhibited 50.5 dB (99.999%), and the whole nanoparticle-based composite blocked 99.99% of the electromagnetic radiation. The functionalization increased the shielding by 15.4%. The composite possessed good thermal stability, and the maximum electric conductivity achieved was 12.5 S·cm−1. Thus, the composite shows excellent potential applications towards the areas such as aeronautics, mobile phones, radars, and military.

scholarly journals Graphene Family Nanomaterials: Properties and Potential Applications in Dentistry

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Ziyu Ge ◽  
Luming Yang ◽  
Fang Xiao ◽  
Yani Wu ◽  
Tingting Yu ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Current Knowledge ◽  
Antibacterial Properties ◽  
Biological Properties ◽  
New Materials ◽  
Clinical Reality ◽  
Comprehensive Literature Review ◽  
Potential Applications

Graphene family nanomaterials, with superior mechanical, chemical, and biological properties, have grabbed appreciable attention on the path of researches seeking new materials for future biomedical applications. Although potential applications of graphene had been highly reviewed in other fields of medicine, especially for their antibacterial properties and tissue regenerative capacities, in vivo and in vitro studies related to dentistry are very limited. Therefore, based on current knowledge and latest progress, this article aimed to present the recent achievements and provide a comprehensive literature review on potential applications of graphene that could be translated into clinical reality in dentistry.

scholarly journals Surface Characteristics and Cell Adhesion Behaviors of the Anodized Biomedical Stainless Steel

2020 ◽  
Vol 10 (18) ◽  
pp. 6275
Author(s):  
Heng-Jui Hsu ◽  
Chia-Yu Wu ◽  
Bai-Hung Huang ◽  
Chi-Hsun Tsai ◽  
Takashi Saito ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cell Culture ◽  
Stainless Steel ◽  
Cell Adhesion ◽  
Oxide Layer ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
In Vitro Cell Culture ◽  
Cell Culture Assay

In this study, an electrochemical anodizing method was applied as surface modification of the 316L biomedical stainless steel (BSS). The surface properties, microstructural characteristics, and biocompatibility responses of the anodized 316L BSS specimens were elucidated through scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, and in vitro cell culture assay. Analytical results revealed that the oxide layer of dichromium trioxide (Cr2O3) was formed on the modified 316L BSS specimens after the different anodization modifications. Moreover, a dual porous (micro/nanoporous) topography can also be discovered on the surface of the modified 316L BSS specimens. The microstructure of the anodized oxide layer was composed of amorphous austenite phase and nano-Cr2O3. Furthermore, in vitro cell culture assay also demonstrated that the osteoblast-like cells (MG-63) on the anodized 316L BSS specimens were completely adhered and covered as compared with the unmodified 316L BSS specimen. As a result, the anodized 316L BSS with a dual porous (micro/nanoporous) oxide layer has great potential to induce cell adhesion and promote bone formation.

scholarly journals Gradient Chitosan Hydrogels Modified with Graphene Derivatives and Hydroxyapatite: Physiochemical Properties and Initial Cytocompatibility Evaluation

2020 ◽  
Vol 21 (14) ◽  
pp. 4888
Author(s):  
Karolina Kosowska ◽  
Patrycja Domalik-Pyzik ◽  
Małgorzata Sekuła-Stryjewska ◽  
Sylwia Noga ◽  
Joanna Jagiełło ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Mechanical Analysis ◽  
Biological Properties ◽  
Human Umbilical Cord ◽  
Tissue Engineering Scaffolds ◽  
X Ray ◽  
Chitosan Matrix ◽  
Graphene Derivatives

In this study, we investigated preparation of gradient chitosan-matrix hydrogels through a novel freezing–gelling–thawing method. The influence of three types of graphene family materials (GFM), i.e., graphene oxide (GO), reduced graphene oxide (rGO), and poly(ethylene glycol) grafted graphene oxide (GO-PEG), as well as hydroxyapatite (HAp) on the physicochemical and biological properties of the composite hydrogels was examined in view of their potential applicability as tissue engineering scaffolds. The substrates and the hydrogel samples were thoroughly characterized by X-ray photoelectron spectroscopy, X-ray diffractometry, infrared spectroscopy, digital and scanning electron microscopy, rheological and mechanical analysis, in vitro chemical stability and bioactivity assays, as well as initial cytocompatibility evaluation with human umbilical cord Wharton’s jelly mesenchymal stem cells (hUC-MSCs). We followed the green-chemistry approach and avoided toxic cross-linking agents, using instead specific interactions of our polymer matrix with tannic acid, non-toxic physical cross-linker, and graphene derivatives. It was shown that the most promising are the gradient hydrogels modified with GO-PEG and HAp.

Sign in / Sign up

Export Citation Format

Share Document