scholarly journals Mechanisms of in Vivo Degradation and Resorption of Calcium Phosphate Based Biomaterials

Materials ◽  
2015 ◽  
Vol 8 (11) ◽  
pp. 7913-7925 ◽  
Author(s):  
Zeeshan Sheikh ◽  
Mohamed-Nur Abdallah ◽  
Ahmed Hanafi ◽  
Syed Misbahuddin ◽  
Haroon Rashid ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
In Vivo Degradation

scholarly journals In vitro and in vivo degradation of poly(D, L-lactide-co-glycolide)/amorphous calcium phosphate copolymer coated on metal stents

2011 ◽  
Vol 96A (4) ◽  
pp. 632-638 ◽  
Author(s):  
Xiaodong Ma ◽  
Shizu Oyamada ◽  
Tim Wu ◽  
Michael P. Robich ◽  
Hao Wu ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Metal Stents ◽  
In Vivo Degradation

In vivo degradation of calcium phosphate cement incorporated into biodegradable microspheres

2010 ◽  
Vol 6 (6) ◽  
pp. 2200-2211 ◽  
Author(s):  
W.J.E.M. Habraken ◽  
H.B. Liao ◽  
Z. Zhang ◽  
J.G.C. Wolke ◽  
D.W. Grijpma ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Calcium Phosphate Cement ◽  
Biodegradable Microspheres ◽  
In Vivo Degradation

scholarly journals In Vitro and In Vivo Biosafety Analysis of Resorbable Polyglycolic Acid-Polylactic Acid Block Copolymer Composites for Spinal Fixation

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 29
Author(s):  
Seung Kyun Yoon ◽  
Jin Ho Yang ◽  
Hyun Tae Lim ◽  
Young-Wook Chang ◽  
Muhammad Ayyoob ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Animal Experiments ◽  
Polymeric Materials ◽  
Polyglycolic Acid ◽  
Poly Lactic Acid ◽  
Skin Sensitization ◽  
Spinal Fixation ◽  
In Vivo Degradation

Herein, spinal fixation implants were constructed using degradable polymeric materials such as PGA–PLA block copolymers (poly(glycolic acid-b-lactic acid)). These materials were reinforced by blending with HA-g-PLA (hydroxyapatite-graft-poly lactic acid) and PGA fiber before being tested to confirm its biocompatibility via in vitro (MTT assay) and in vivo animal experiments (i.e., skin sensitization, intradermal intracutaneous reaction, and in vivo degradation tests). Every specimen exhibited suitable biocompatibility and biodegradability for use as resorbable spinal fixation materials.

scholarly journals Biphasic Calcium Phosphate Biomaterials: Stem Cell-Derived Osteoinduction or In Vivo Osteoconduction? Novel Insights in Maxillary Sinus Augmentation by Advanced Imaging

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2159
Author(s):  
Giovanna Iezzi ◽  
Antonio Scarano ◽  
Luca Valbonetti ◽  
Serena Mazzoni ◽  
Michele Furlani ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Maxillary Sinus ◽  
Biphasic Calcium Phosphate ◽  
Calcium Phosphates ◽  
Three Dimensional ◽  
Sinus Augmentation ◽  
Native Bone ◽  
Maxillary Sinus Augmentation ◽  
Posterior Maxilla

Maxillary sinus augmentation is often necessary prior to implantology procedure, in particular in cases of atrophic posterior maxilla. In this context, bone substitute biomaterials made of biphasic calcium phosphates, produced by three-dimensional additive manufacturing were shown to be highly biocompatible with an efficient osteoconductivity, especially when combined with cell-based tissue engineering. Thus, in the present research, osteoinduction and osteoconduction properties of biphasic calcium-phosphate constructs made by direct rapid prototyping and engineered with ovine-derived amniotic epithelial cells or amniotic fluid cells were evaluated. More in details, this preclinical study was performed using adult sheep targeted to receive scaffold alone (CTR), oAFSMC, or oAEC engineered constructs. The grafted sinuses were explanted at 90 days and a cross-linked experimental approach based on Synchrotron Radiation microCT and histology analysis was performed on the complete set of samples. The study, performed taking into account the distance from native surrounding bone, demonstrated that no significant differences occurred in bone regeneration between oAEC-, oAFMSC-cultured, and Ctr samples and that there was a predominant action of the osteoconduction versus the stem cells osteo-induction. Indeed, it was proven that the newly formed bone amount and distribution decreased from the side of contact scaffold/native bone toward the bulk of the scaffold itself, with almost constant values of morphometric descriptors in volumes more than 1 mm from the border.

Calcium Phosphate-Coated Titanium Implants in the Mandible: Limitations of the in vivo Minipig Model

2020 ◽  
Vol 61 (6) ◽  
pp. 177-187
Author(s):  
Till Kämmerer ◽  
Tony Lesmeister ◽  
Victor Palarie ◽  
Eik Schiegnitz ◽  
Andrea Schröter ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Statistical Difference ◽  
Surface Modifications ◽  
Titanium Implants ◽  
In Vivo Model ◽  
Implant Surface ◽  
Press Fit ◽  
Endosseous Implant ◽  
Bone To Implant Contact

Introduction: We aimed to compare implant osseointegration with calcium phosphate (CaP) surfaces and rough subtractive-treated sandblasted/acid etched surfaces (SA) in an in vivo minipig mandible model. Materials and Methods: A total of 36 cylindrical press-fit implants with two different surfaces (CaP, n = 18; SA, n = 18) were inserted bilaterally into the mandible of 9 adult female minipigs. After 2, 4, and 8 weeks, we analyzed the cortical bone-to-implant contact (cBIC; %) and area coverage of bone-to-implant contact within representative bone chambers (aBIC; %). Results: After 2 weeks, CaP implants showed no significant increase in cBIC and aBIC compared to SA (cBIC: mean 38 ± 5 vs. 16 ± 11%; aBIC: mean 21 ± 1 vs. 6 ± 9%). Two CaP implants failed to achieve osseointegration. After 4 weeks, no statistical difference between CaP and SA was seen for cBIC (mean 54 ± 15 vs. 43 ± 16%) and aBIC (mean 43 ± 28 vs. 32 ± 6). However, we excluded two implants in each group due to failure of osseointegration. After 8 weeks, we observed no significant intergroup differences (cBIC: 18 ± 9 vs. 18 ± 20%; aBIC: 13 ± 8 vs. 16 ± 9%). Again, three CaP implants and two SA implants had to be excluded due to failure of osseointegration. Conclusion: Due to multiple implant losses, we cannot recommend the oral mandibular minipig in vivo model for future endosseous implant research. Considering the higher rate of osseointegration failure, CaP coatings may provide an alternative to common subtractive implant surface modifications in the early phase post-insertion.

scholarly journals In-Vivo Degradation Behavior and Osseointegration of 3D Powder-Printed Calcium Magnesium Phosphate Cement Scaffolds

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 946
Author(s):  
Katharina Kowalewicz ◽  
Elke Vorndran ◽  
Franziska Feichtner ◽  
Anja-Christina Waselau ◽  
Manuel Brueckner ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Bone Substitutes ◽  
Magnesium Phosphate ◽  
Degradation Behavior ◽  
Micro Computed Tomography ◽  
Calcium Magnesium ◽  
Interest In Research ◽  
In Vivo Degradation ◽  
Volume Decrease

Calcium magnesium phosphate cements (CMPCs) are promising bone substitutes and experience great interest in research. Therefore, in-vivo degradation behavior, osseointegration and biocompatibility of three-dimensional (3D) powder-printed CMPC scaffolds were investigated in the present study. The materials Mg225 (Ca0.75Mg2.25(PO4)2) and Mg225d (Mg225 treated with diammonium hydrogen phosphate (DAHP)) were implanted as cylindrical scaffolds (h = 5 mm, Ø = 3.8 mm) in both lateral femoral condyles in rabbits and compared with tricalcium phosphate (TCP). Treatment with DAHP results in the precipitation of struvite, thus reducing pore size and overall porosity and increasing pressure stability. Over 6 weeks, the scaffolds were evaluated clinically, radiologically, with Micro-Computed Tomography (µCT) and histological examinations. All scaffolds showed excellent biocompatibility. X-ray and in-vivo µCT examinations showed a volume decrease and increasing osseointegration over time. Structure loss and volume decrease were most evident in Mg225. Histologically, all scaffolds degraded centripetally and were completely traversed by new bone, in which the remaining scaffold material was embedded. While after 6 weeks, Mg225d and TCP were still visible as a network, only individual particles of Mg225 were present. Based on these results, Mg225 and Mg225d appear to be promising bone substitutes for various loading situations that should be investigated further.

In vitro and in vivo degradation of silk fibers degummed with various sodium carbonate concentrations

2021 ◽  
Vol 27 ◽  
pp. 102369
Author(s):  
Shijun Lu ◽  
Xiaochen Tang ◽  
Qingqing Lu ◽  
Jiwei Huang ◽  
Xinran You ◽  
...  
Keyword(s):  
Sodium Carbonate ◽  
Silk Fibers ◽  
In Vivo Degradation

scholarly journals A bone replacement-type calcium phosphate cement that becomes more porous in vivo by incorporating a degradable polymer

2021 ◽  
Vol 32 (7) ◽  
Author(s):  
Akiyoshi Shimatani ◽  
Hiromitsu Toyoda ◽  
Kumi Orita ◽  
Yuta Ibara ◽  
Yoshiyuki Yokogawa ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Calcium Phosphate Cement ◽  
Alginic Acid ◽  
Setting Time ◽  
Zealand White Rabbit ◽  
Control Group ◽  
Degradable Polymer ◽  
Low Viscosity ◽  
Bone Replacement

AbstractThis study investigated whether mixing low viscosity alginic acid with calcium phosphate cement (CPC) causes interconnected porosity in the CPC and enhances bone replacement by improving the biological interactions. Furthermore, we hypothesized that low viscosity alginic acid would shorten the setting time of CPC and improve its strength. CPC samples were prepared with 0, 5, 10, and 20% low viscosity alginic acid. After immersion in acetate buffer, possible porosification in CPC was monitored in vitro using scanning electron microscopy (SEM), and the setting times and compressive strengths were measured. In vivo study was conducted by placing CPC in a hole created on the femur of New Zealand white rabbit. Microcomputed tomography and histological examination were performed 6 weeks after implantation. SEM images confirmed that alginic acid enhanced the porosity of CPC compared to the control, and the setting time and compressive strength also improved. When incorporating a maximum amount of alginic acid, the new bone mass was significantly higher than the control group (P = 0.0153). These biological responses are promising for the translation of these biomaterials and their commercialization for clinic applications.

Sign in / Sign up

Export Citation Format

Share Document