scholarly journals Evaluation of New Hollow Sleeve Composites for Direct Post-Core Construction

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7397
Author(s):  
Shinji Yoshii ◽  
Sufyan Garoushi ◽  
Chiaki Kitamura ◽  
Pekka K. Vallittu ◽  
Lippo V. Lassila
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Resin Composite ◽  
Flexural Modulus ◽  
Accelerated Aging ◽  
Fracture Analysis ◽  
Bending Test ◽  
Outer Diameter ◽  
Fiber Post ◽  
Three Point Bending

The preset shape and diameter of a prefabricated FRC post rarely follows the anatomy of the root canal. To solve this problem, a new hollow sleeve composite (HSC) system for post-core construction was developed and characterized. A woven fiber was impregnated with two types of resins: Bis-GMA or PMMA, and rolled into cylinders with outer diameter of 2 mm and two different inner diameters, namely 1.2 or 1.5 mm. The commercial i-TFC system was used as a control. Dual-cure resin composite was injected into these sleeves. Additionally, conventional solid fiber post was used as the inner part of the sleeve. The three-point bending test was used to measure the mechanical properties of the specimens and the fracture surface was examined using an electron microscope (SEM). The HSC (1.5 mm, Bis-GMA) revealed a statistically similar flexural modulus but higher flexural strength (437 MPa) compared to i-TFC (239 MPa; ANOVA, p < 0.05). When a fiber post was added inside, all values had a tendency to increase. After hydrothermal accelerated aging, the majority of specimens showed a significant (p < 0.05) decrease in flexural strength and modulus. SEM fracture analysis confirmed that the delamination occurred at the interface between the outer and inner materials. The HSC system provided flexibility but still high mechanical values compared to the commercial system. Thus, this system might offer an alternative practical option for direct post-core construction.

scholarly journals Resin Composite Materials for Chairside CAD/CAM Restorations: A Comparison of Selected Mechanical Properties

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Wojciech Grzebieluch ◽  
Marcin Mikulewicz ◽  
Urszula Kaczmarek
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Weibull Modulus ◽  
Resin Composite ◽  
Flexural Modulus ◽  
Bending Test ◽  
Weibull Analysis ◽  
Three Point Bending ◽  
Characteristic Strength ◽  
Cad Cam

Objective. The aim was to evaluate the flexural strength, flexural modulus, microhardness, Weibull modulus, and characteristic strength of six resin composite blocks (Grandio Blocs-GR, Tetric CAD-TE, Brilliant Crios-CR, Katana Avencia-AV, Cerasmart-CS, and Shofu Block HC-HC). Methods. Flexural strength and flexural modulus were measured using a three-point bending test and microhardness using the Vickers method. Weibull analysis was also performed. Results. The materials showed flexural strength ranging from 120.38 (HC) to 186.02 MPa (GR), flexural modulus from 8.26 (HC) to 16.95 GPa (GR), and microhardness from 70.85 (AV) to 140.43 (GR). Weibull modulus and characteristic strength ranged from 16.35 (CS) to 34.98 (TE) and from 123.45 MPa (HC) to 190.3 MPa (GR), respectively. Conclusions. GR, TE, and CR presented significantly higher flexural strength, modulus, Weibull modulus, and characteristic strength than the others.

THE INFLUENCE OF SiC COATING PROCESS ON THE PROPERTIES OF C/C COMPOSITES

2007 ◽  
Vol 14 (04) ◽  
pp. 817-820
Author(s):  
MIN HUANG ◽  
KE-ZHI LI ◽  
HE-JUN LI ◽  
QIAN-GANG FU ◽  
GUO-DONG SUN
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Failure Mode ◽  
Flexural Modulus ◽  
Pack Cementation ◽  
Bending Test ◽  
Carbon Composites ◽  
Coating Process ◽  
Three Point Bending ◽  
Coated Carbon

SiC coating for carbon/carbon composites was prepared by pack cementation method. The effects of coating process on the microstructure and the mechanical properties of C / C composites were analyzed by SEM and three-point bending test, respectively. As the infiltrated Si improved the interfaces bonding during the coating process, the flexural strength and flexural modulus of SiC -coated carbon/carbon composites were both increased by about 10% than the naked C / C composites. In addition, the mechanism of the change of failure mode of SiC coated C / C composites and naked C / C composites was addressed.

scholarly journals Influence of a Repeated Preheating Procedure on Mechanical Properties of Three Resin Composites

2015 ◽  
Vol 40 (2) ◽  
pp. 181-189 ◽  
Author(s):  
M D'Amario ◽  
F De Angelis ◽  
M Vadini ◽  
N Marchili ◽  
S Mummolo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Vickers Microhardness ◽  
Flexural Modulus ◽  
Bending Test ◽  
Resin Composites ◽  
Three Point Bending ◽  
Main Effect ◽  
Dependent Variables ◽  
Marginal Means

SUMMARY The aim of this study was to assess the flexural strength, flexural elastic modulus and Vickers microhardness of three resin composites prepared at room temperature or cured after one or repeated preheating cycles to a temperature of 39°C. Three resin composites were evaluated: Enamel Plus HFO (Micerium), Opallis (FGM), and Ceram X Duo (Dentsply DeTrey). For each trial, one group of specimens of each material was fabricated under ambient laboratory conditions, whereas in the other groups, the composites were cured after 1, 10, 20, 30, or 40 preheating cycles to a temperature of 39°C in a preheating device. Ten rectangular prismatic specimens (25 × 2 × 2 mm) were prepared for each group (N=180; n=10) and subjected to a three-point bending test for flexural strength and flexural modulus evaluation. Vickers microhardness was assessed on 10 cylindrical specimens from each group (N=180; n=10). Statistical analysis showed that, regardless of the material, the number of heating cycles was not a significant factor and was unable to influence the three mechanical properties tested. However, a significant main effect of the employed material on the marginal means of the three dependent variables was detected.

Effect of Filler Content and Waiting time Before Light-Curing on Mechanical Properties of Dual-Cured Cement

2020 ◽  
Vol 2 (1) ◽  
pp. 45-52
Author(s):  
Ana C. de Assunção Oliveira ◽  
Sandro Griza ◽  
Rafael R. de Moraes ◽  
André L. Faria-e-Silva
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Flexural Strength ◽  
Waiting Time ◽  
Filler Content ◽  
Bending Test ◽  
Resin Cements ◽  
Three Point Bending ◽  
Light Curing ◽  
Curing Procedure

Objective:: To investigate the effect of filler content and the time spent before light-curing on mechanical properties of dual-cured cement. Methods:: Experimental dual-cured resin cements were formulated with 60, 65 or 68wt% of filler. The viscosity of experimental cement was measured using a digital viscometer. Bar-shaped specimens (25 x 2 x 2 mm) were fabricated, while the light-curing was started immediately or 5 minutes after the insertion of cement into the mold (n = 7). A three-point bending test was performed and the values of flexural strength and elastic modulus were measured. The Vickers hardness of fractured specimens was measured on the surface of the cement. Data from viscosity were submitted to oneway ANOVA, while the data from mechanical properties were analyzed by two-way ANOVA. All pair-wise comparisons were performed using Tukey’s test (α = 0.05). Results:: The experimental cement with 68wt% of filler showed the highest viscosity and those with 60wt% showed the the lowest viscosity. Irrespective of the time spent before light-curing, the cement with 65wt% of filler presented the highest values of flexural strength and elastic modulus. The addition of 60wt% of filler resulted in the lowest elastic modulus, while 68wt% of filler resulted in lowest flexural strength. Regarding the hardness, the cement with 68wt% of filler showed the highest values, while there was no difference between 60 and 65wt% of filler. Conclusion:: Filler content affected the mechanical properties of the experimental cement and this effect did not depend on the waiting time before the light-curing procedure.

The Thermal Shock Resistance of Mg-PSZ/LaPO4 Ceramics

2013 ◽  
Vol 785-786 ◽  
pp. 187-190
Author(s):  
Zhong Qiu Li ◽  
Li Jie Ci ◽  
Tie Cheng Feng ◽  
Shao Yan Zhang
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Thermal Shock ◽  
Thermal Shock Resistance ◽  
Strength Degradation ◽  
Water Quenching ◽  
Bending Test ◽  
Three Point Bending ◽  
Shock Resistance ◽  
Thermal Shock Behavior

The mechanical properties and thermal shock behavior of Mg-PSZ/LaPO4 ceramics was investigated. The thermal shock resistance of the materials was evaluated by water quenching and a subsequent three-point bending test to determine the flexural strength degradation. Mg-PSZ/15LaPO4 composite showed a higher thermal shock resistance and behaved as a typical refractory. The calculation of thermal shock resistance parameters for the composites and the monolith had indicated possible explanations for the differences in thermal shock behavior.

The Effects of MgO Addtion on the Mechanical Properties and the Phase Composition of Al2O3-TiC-TiN Ceramic Materials

2012 ◽  
Vol 457-458 ◽  
pp. 3-6
Author(s):  
Yu Huan Fei ◽  
Chuan Zhen Huang ◽  
Han Lian Liu ◽  
Bin Zou
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Phase Composition ◽  
Flexural Strength ◽  
Ceramic Materials ◽  
Bending Test ◽  
Vickers Indentation ◽  
Volume Percent ◽  
Sintered Ceramic ◽  
Three Point Bending

Al2O3-TiN-TiC ceramic materials with different MgO content were fabricated by hot-pressing technique. The MgO volume percent was varied from 0vol% to 5vol%. Three point bending test was applied to get the flexural strength and the Vickers indentation was applied to get the Vickers hardness and the fracture toughness. The phase composition of the ceramics was analyzed by XRD. The effects of the content of MgO on the mechanical properties and the phase composition of Al2O3-TiN-TiC were investigated. The results shows that the addition of MgO can change the phase composition of the sintered ceramic materials which displayed with diverse solid solutions and intermetallic compounds. The convertion of the mechanical properties can also be explained by the XRD results.

scholarly journals Investigating the Mechanical Properties of ZrO2-Impregnated PMMA Nanocomposite for Denture-Based Applications

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1344 ◽  
Author(s):  
Saleh Zidan ◽  
Nikolaos Silikas ◽  
Abdulaziz Alhotan ◽  
Julfikar Haider ◽  
Julian Yates
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Impact Strength ◽  
Flexural Strength ◽  
Flexural Modulus ◽  
Surface Hardness ◽  
Bending Test ◽  
Zro2 Nanoparticles ◽  
Control Group ◽  
The Mean

Acrylic resin PMMA (poly-methyl methacrylate) is used in the manufacture of denture bases but its mechanical properties can be deficient in this role. This study investigated the mechanical properties (flexural strength, fracture toughness, impact strength, and hardness) and fracture behavior of a commercial, high impact (HI), heat-cured denture base acrylic resin impregnated with different concentrations of yttria-stabilized zirconia (ZrO2) nanoparticles. Six groups were prepared having different wt% concentrations of ZrO2 nanoparticles: 0% (control), 1.5%, 3%, 5%, 7%, and 10%, respectively. Flexural strength and flexural modulus were measured using a three-point bending test and surface hardness was evaluated using the Vickers hardness test. Fracture toughness and impact strength were evaluated using a single edge bending test and Charpy impact instrument. The fractured surfaces of impact test specimens were also observed using a scanning electron microscope (SEM). Statistical analyses were conducted on the data obtained from the experiments. The mean flexural strength of ZrO2/PMMA nanocomposites (84 ± 6 MPa) at 3 wt% zirconia was significantly greater than that of the control group (72 ± 9 MPa) (p < 0.05). The mean flexural modulus was also significantly improved with different concentrations of zirconia when compared to the control group, with 5 wt% zirconia demonstrating the largest (23%) improvement. The mean fracture toughness increased in the group containing 5 wt% zirconia compared to the control group, but it was not significant. However, the median impact strength for all groups containing zirconia generally decreased when compared to the control group. Vickers hardness (HV) values significantly increased with an increase in ZrO2 content, with the highest values obtained at 10 wt%, at 0 day (22.9 HV0.05) in dry conditions when compared to the values obtained after immersing the specimens for seven days (18.4 HV0.05) and 45 days (16.3 HV0.05) in distilled water. Incorporation of ZrO2 nanoparticles into high impact PMMA resin significantly improved flexural strength, flexural modulus, fracture toughness and surface hardness, with an optimum concentration of 3–5 wt% zirconia. However, the impact strength of the nanocomposites decreased, apart from the 5 wt% zirconia group.

scholarly journals Rapid 3 s Curing: What Happens in Deep Layers of New Bulk-Fill Composites?

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 515
Author(s):  
Danijela Marovic ◽  
Matej Par ◽  
Ana Crnadak ◽  
Andjelina Sekelja ◽  
Visnja Negovetic Mandic ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Raman Spectroscopy ◽  
Flexural Strength ◽  
Flexural Modulus ◽  
Degree Of Conversion ◽  
Resin Composites ◽  
Three Point Bending ◽  
Deep Layers ◽  
Light Curing ◽  
New Generation

This study assessed the influence of rapid 3 s light curing on the new generation of bulk-fill resin composites under the simulated aging challenge and depths up to 4 mm. Four bulk-fill materials were tested: two materials designed for rapid curing (Tetric PowerFill—PFILL; Tetric PowerFlow—PFLW) and two regular materials (Filtek One Bulk Fill Restorative—FIL; SDR Plus Bulk Fill Flowable—SDR). Three-point bending (n = 10) was used to measure flexural strength (FS) and flexural modulus (FM). In the 3 s group, two 2 mm thick specimens were stacked to obtain 4 mm thickness, while 2 mm-thick specimens were used for ISO group. Specimens were aged for 1, 30, or 30 + 3 days in ethanol. The degree of conversion (DC) up to 4 mm was measured by Raman spectroscopy. There was no difference between curing protocols in FS after 1 day for all materials except PFLW. FM was higher for all materials for ISO curing protocol. Mechanical properties deteriorated by increasing depth (2–4 mm) and aging. ISO curing induced higher DC for PFLW and FIL, while 3 s curing was sufficient for PFILL and SDR. The 3 s curing negatively affected FM of all tested materials, whereas its influence on FS and DC was highly material-specific.

scholarly journals Correlation between the Mechanical Properties and Structural Characteristics of Different Fiber Posts Systems

2016 ◽  
Vol 27 (1) ◽  
pp. 46-51 ◽  
Author(s):  
Veridiana Resende Novais ◽  
Renata Borges Rodrigues ◽  
Paulo Cezar Simamoto Júnior ◽  
Correr-Sobrinho Lourenço ◽  
Carlos José Soares
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Cross Sections ◽  
Structural Characteristics ◽  
Flexural Modulus ◽  
Testing Machine ◽  
Correlation Coefficients ◽  
Bending Test ◽  
Fiber Posts ◽  
Fiber Matrix

Abstract The aim of this study was to evaluate the flexural strength and flexural modulus of different fiber-reinforcement composite (FRC) posts and determine the correlation between mechanical properties and structural characteristics. Eleven brands of fiber posts were analyzed (n=10): Exacto Cônico (Angelus), DT Light SL (VDW), RelyX Fiber Post (3M-Espe), Glassix Radiopaque (Nordim), Para Post Fiber White (Coltène), FRC Postec Plus (Ivoclar), Aestheti-Plus Post (Bisco), Superpost Cônico Estriado (Superdont), Superpost Ultrafine (Superdont), Reforpost (Angelus), and White Post DC (FGM). The posts were loaded in three-point bending test to calculate the flexural strength and flexural modulus using a mechanical testing machine (EMIC 2000 DL) at 0.5 mm/min. Data were submitted to one-way ANOVA and Scott-Knot test (p<0.05). The cross-sections of the posts were examined by scanning electron microscopy (SEM). Correlation between the mechanical properties and each of the structural variables was calculated by Pearson's correlation coefficients (p<0.05). The flexural strength values ranged from 493 to 835 MPa and were directly correlated with the fiber/matrix ratio (p=0.011). The flexural modulus ranged from 4500 to 8824 MPa and was inversely correlated with the number of fibers per mm2 of post (p<0.001). It was concluded that the structural characteristics significantly affected the properties of the FRC posts. The structural characteristic and mechanical properties of fiber glass posts are manufacture-dependent. A linear correlation between flexural strength and fiber/matrix ratio, as well as the flexural modulus and the amount of fiber was found.

scholarly journals Mechanical Properties, Structure and Fracture Behavior of Additive Manufactured FFF-ABS Specimens

2020 ◽  
Vol 31 ◽  
pp. 71-78
Author(s):  
O. Gewelber ◽  
Y. Rosenthal ◽  
D. Ashkenazi ◽  
A. Stern
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Bending Test ◽  
Fused Filament Fabrication ◽  
Surface Appearance ◽  
Three Point Bending ◽  
Cad Modelling ◽  
Strength Difference ◽  
The One ◽  
Visual Testing

The Fused Filament Fabrication (FFF) method is one of the most important additive manufacturing (AM) technologies. This technology is used today with various kinds of thermoplastic materials, including ABS. The present study deals with the flexural strength and axial deflection of ABS specimens versus relative density, to observe the influence of build-orientations, build model and microscopic level defects of these properties. In this study, the mechanical and structural characterization of AM-FFF ABS material was studied by CAD modelling of different orientations, three point bending mechanical testing, visual testing, and multifocal light microscopy observation, including fractography analysis. To that end, three different standard building orientations (Flat, On Edge and Upright) were printed, and each was built in two different angle orientations (-45o/+45o and 0°/90o). Based on the three point bending testing results, it was found that the specimen with the highest flexural strength was not necessarily the one with the highest deflection. It was also observed that On Edge 0/+90o orientations showed a relatively larger flexural strength difference in comparison to other building orientations (Flat and Upright). When the mechanical properties achieved from a bending test next to the building platform were compared to the properties far from the building platform, only a slight difference was found, which means that the flexural strength difference results from the building strategy and it is not related to the specific bending surface. Based on fractography observation, there is a major difference in the mechanical properties and fracture surface appearance, when the samples are bent between the layers (Upright orientation) or when the samples are bent through the layers (Flat and On Edge orientation).

Sign in / Sign up

Export Citation Format

Share Document