scholarly journals Torsional Crack Localization in Palm Oil Clinker Concrete Using Acoustic Emission Method

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5446
Author(s):  
Safdar Khan ◽  
Soon Poh Yap ◽  
Chee Ghuan Tan ◽  
Reventheran Ganasan ◽  
Muhammad M. Sherif ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Palm Oil ◽  
Mechanical Response ◽  
Acoustic Emissions ◽  
Torsional Response ◽  
Naturally Occurring ◽  
Sudden Rise ◽  
Torsional Loads ◽  
Selection For ◽  
Sand And Gravel

Palm oil clinker (POC) aggregates is a viable alternative to the naturally occurring sand and gravel in the manufacturing of concrete. The usage of POC aggregates assists in the reduction of solid waste and preserves the consumption of natural resources. Although researchers investigated the mechanical response of POC-containing concrete, limited research is available for its torsional behavior. In general, the torsional strength depends on the tensile strength of concrete. This research investigates the compressive, tensile, and torsional response of concrete with various ratios of POC-aggregates. Five batches of concrete were casted with POC-aggregate replacing granite at ratios of 0, 20, 40, 60, and 100%. The selection for the mixture proportions for the various batches was based on the design of experiments (DOE) methodology. The hard density, compressive strength, splitting tensile strength, and flexural strength of concrete with a 100% replacement of granite with POC-aggregates reduced by 8.80, 37.25, 30.94, and 14.31%, respectively. Furthermore, a reduction in initial and ultimate torque was observed. While cracks increased with the increase in POC-aggregates. Finally, the cracking of concrete subjected to torsional loads was monitored and characterized by acoustic emissions (AE). The results illustrate a sudden rise in AE activities during the initiation of cracks and as the ultimate cracks were developed. This was accompanied by a sudden drop in the torque/twist curve.

Molecular dynamics study on the mechanical response and failure behaviour of graphene: performance enhancement via 5–7–7–5 defects

RSC Advances ◽  
2016 ◽  
Vol 6 (31) ◽  
pp. 26361-26373 ◽  
Author(s):  
G. Rajasekaran ◽  
Avinash Parashar
Keyword(s):  
Molecular Dynamics ◽  
Tensile Strength ◽  
Structural Properties ◽  
Elastic Moduli ◽  
Mechanical Response ◽  
Performance Enhancement ◽  
Structural Defects ◽  
Thick Sheet ◽  
Failure Behaviour ◽  
Production Techniques

A one atom-thick sheet of carbon exhibits outstanding elastic moduli and tensile strength in its pristine form but structural defects which are inevitable in graphene due to its production techniques can alter its structural properties.

scholarly journals Mechanical Response of Al-1.09Mg2Si Alloy under Varying Mould and Thermal Ageing Conditions

2012 ◽  
Vol 2012 ◽  
pp. 1-7
Author(s):  
O. I. Sekunowo ◽  
G. I. Lawal ◽  
S. O. Adeosun
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Ambient Temperature ◽  
Mechanical Response ◽  
Ageing Time ◽  
Thermal Ageing ◽  
Alloy Ingot ◽  
Solution Treated ◽  
Crucible Furnace

Samples of the 6063 (Al-1.09Mg2Si) alloy ingot were melted in a crucible furnace and cast in metal and sand moulds, respectively. Standard tensile, hardness, and microstructural test specimens were prepared from cast samples, solution treated at 520∘C, soaked for 6 hrs, and immediately quenched at ambient temperature in a trough containing water to assume a supersaturated structure. The quenched specimens were then thermally aged at 175∘C for 3–7 hrs. Results show that at different ageing time, varied fractions of precipitates and intermetallics evolved in the specimens’ matrices which affect the resulting mechanical properties. The metal mould specimens aged for four hours (MTA-4) exhibited superior ultimate tensile strength of 247.8 MPa; microhardness, 68.5 HV; elongation, 28.2% . It is concluded that the extent of improvement in mechanical properties depends on the fractions, coherence, and distribution of precipitates along with the type of intermetallics developed in the alloy during ageing process.

scholarly journals Preliminary Study of Oil Palm Decanter Cake Natural Polymer Composite (OPDC-NPC)

2014 ◽  
Vol 911 ◽  
pp. 40-44 ◽  
Author(s):  
Muhammad Aqif Adam ◽  
Alawi Sulaiman ◽  
Che Mohd Som Said ◽  
Ayub M. Som ◽  
Azhari Samsu Bahruddin ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Water Absorption ◽  
Polymer Composite ◽  
Palm Oil ◽  
Oil Palm ◽  
Absorption Rate ◽  
Natural Fiber ◽  
Natural Polymer ◽  
Water Absorption Rate ◽  
Decanter Cake

Palm oil industry produces huge amount of oil palm decanter cake (OPDC). Currently it is not yet commercialized however due to its characteristics, it can be used to produce oil palm decanter cake natural polymer composite (OPDC-NPC). NPC is a type of material made by combining natural fiber with polymer. Therefore the objective of this paper is to produce NPC from OPDC and then determine its mechanical and physical properties such as elasticity, stiffness, tensile strength and water absorption rate. The OPDC samples were collected from Felda Trolak Palm Oil Mill. Prior to NPC development, the oil was removed from OPDC using hexane soxhlet extraction method. OPDC-NPC was fabricated using molding method where the mixture of 95% polypropylene (PP) and 5% OPDC were mixed using twin-screw extruder. The results showed that OPDC-NPC has an elasticity of 2231 MPa, stiffness of 30 MPa, tensile strength of 32 MPa and water absorption rate of 0.16 % which was slightly better with the other types of fibers.

Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks

2022 ◽  
Author(s):  
Mazhar Hussain ◽  
Daniel Levacher ◽  
Nathalie Leblanc ◽  
Hafida Zmamou ◽  
Irini Djeran Maigre ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Composite Materials ◽  
Physical Properties ◽  
Palm Oil ◽  
Mechanical Characteristics ◽  
Natural Fibers ◽  
Indirect Tensile

Crude bricks are composite materials manufactured with sediments and natural fibers. Natural fibers are waste materials and used in construction materials for reinforcement. Their reuse in manufacturing reinforced crude bricks is eco-friendly and improves mechanical and thermal characteristics of crude bricks. Factors such as type of fibers, percentage of fibers, length of fibers and distribution of fibers inside the bricks have significant effect on mechanical, physical and thermal properties of biobased composite materials. It can be observed by tests such as indirect tensile strength, compressive strength for mechanical characteristics, density, shrinkage, color for physical properties, thermal conductivity and resistivity for thermal properties, and inundation test for durability of crude bricks. In this study, mechanical and physical characteristics of crude bricks reinforced with palm oil fibers are investigated and effect of change in percentage and length of fibers is observed. Crude bricks of size 4*4*16 cm3 are manufactured with dredged sediments from Usumacinta River, Mexico and reinforced with palm oil fibers at laboratory scale. For this purpose, sediments and palm oil fibers characteristics were studied. Length of fibers used is 2cm and 3cm. Bricks manufacturing steps such as sediments fibers mixing, moulding, compaction and drying are elaborated. Dynamic compaction is opted for compaction of crude bricks due to energy control. Indirect tensile strength and compressive strength tests are conducted to identify the mechanical characteristics of crude bricks. Physical properties of bricks are studied through density and shrinkage. Durability of crude bricks is observed with inundation test. Thermal properties are studied with thermal conductivity and resistivity test. Distribution and orientation of fibers and fibers counting are done to observe the homogeneity of fibers inside the crude bricks. Finally, comparison between the mechanical characteristics of crude bricks manufactured with 2cm and 3cm length with control specimen was made.

scholarly journals The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer

2020 ◽  
Vol 111 (3-4) ◽  
pp. 695-709
Author(s):  
H. Gonabadi ◽  
A. Yadav ◽  
S. J. Bull
Keyword(s):  
Tensile Strength ◽  
Young’S Modulus ◽  
Process Parameters ◽  
Mechanical Response ◽  
Complex Geometry ◽  
Young's Modulus ◽  
Laminate Plate ◽  
Surface Strain ◽  
Image Correlation ◽  
Build Orientation

Abstract 3D printing by fused filament fabrication (FFF) provides an innovative manufacturing method for complex geometry components. Since FFF is a layered manufacturing process, effects of process parameters are of concern when plastic materials such as polylactic acid (PLA), polystyrene and nylon are used. This study explores how the process parameters, e.g. build orientation and infill pattern/density, affect the mechanical response of PLA samples produced using FFF. Digital image correlation (DIC) was employed to get full-field surface-strain measurements. The results show the influence of build orientation and infill density is significant. For on-edge orientation, the tensile strength and Young’s modulus were 55 MPa and 3.5 GPa respectively, which were about 91% and 40% less for the upright orientation, demonstrating a significant anisotropy. The tensile strength and Young’s modulus increased with increasing infill density. In contrast, different infill patterns have no significant effect. Considering the influence of build orientation, based on the experimental results, a constitutive model derived from the laminate plate theory was employed. The material parameters were determined by tensile tests. Results demonstrated a reasonable agreement between the experimental data and the predictive model. Similar anisotropy to tension was observed in shear tests; shear modulus and shear strength for 45° flat orientation were about 1.55 GPa and 36 MPa, whereas for upright specimens they were about 0.95 GPa and 18 MPa, respectively. The findings provide a framework for systematic mechanical characterisation of 3D-printed polymers and potential ways of choosing process parameters to maximise performance for a given design.

Properties of Highly Filled, Highly Plasticized, Semicrystalline Polymer Networks

1991 ◽  
Vol 64 (2) ◽  
pp. 181-201 ◽  
Author(s):  
Richard D. Vargo ◽  
Frank N. Kelley
Keyword(s):  
Tensile Strength ◽  
Mechanical Response ◽  
Polymer Networks ◽  
Three Dimensional ◽  
Important Variable ◽  
Failure Behavior ◽  
Energy Data ◽  
Viscoelastic Effects ◽  
Tearing Energy ◽  
Increasing Temperature

Abstract 1. Component reactivity of ingredients such as fillers and plasticizers is significant and is measurable by a technique developed during this work. 2. The undesirable syneresis problem common to these highly plasticized materials can be controlled through adjusting equivalence ratios. Syneresis can be controlled primarily by decreasing the crystallinity of the material. 3. Changing percent crystallinity with temperature is a very important variable controlling the physical properties, i.e., ultimate properties, tearing energy, and dynamic-mechanical response. 4. The tearing energy data did not display simple amorphous behavior, and, as such, could not be shifted using a reduced variables technique such as WLF shifting. All variables were needed to represent the data. Three dimensional plotting developed previously by von Merrwall et al. was utilized to represent the data. The resulting tear-energy data exhibit the normal viscoelastic effects of rate and temperature as well as the superposition of the effects of crystallinity on the tearing energy. A decrease in tearing energy with increasing temperature is primarily due to increasing crystallinity in the samples. Plasticizer decreased the tearing energy, while filler increased the tearing energy. Filler lessened the effects of temperature and plasticizer on tearing energy. 5. Ultimate property measurements using ring samples for these model propellants revealed that these materials did not behave in a simple thermo-rheological manner, since crystallinity effects are predominant in the tensile mode. Because of crystallinity and strain-induced crystallinity, the data could not be represented by a failure envelope as proposed by Smith. The presence of plasticizer has the effect of decreasing the tensile strength, while filler tends to increase the tensile strength for the plasticized systems. 6. A model is presented to explain the high strain-to-failure behavior of these systems. Further details of this work can be found in Reference 22.

Effect of Epoxidized Palm Oil Loading on the Swelling and Mechanical Properties of SBR Vulcanizates

2013 ◽  
Vol 812 ◽  
pp. 236-240
Author(s):  
Mohd Zaki Nurul Ayunie ◽  
Ahmad Zafir Romli ◽  
M.A. Wahab ◽  
Mohd Hanafiah Abidin
Keyword(s):  
Tensile Strength ◽  
Carbon Black ◽  
Palm Oil ◽  
Crosslink Density ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Elongation At Break ◽  
Epoxidized Palm Oil ◽  
Opposite Trend ◽  
Styrene Butadiene

The effects of epoxidized palm oil (EPO) content in carbon black filled styrene butadiene rubber (SBR) on tensile strength, elongation at break and crosslink density were investigated. Five different loadings of EPO in parts per hundred rubbers (phr) were used to test the tensile strength of the carbon black filled SBR which showed a decreasing trend as the content of EPO in the vulcanizates increased. In contrast, elongation at break showed the opposite trend where the elongation at break increased as the content of the EPO increased. The SBR vulcanizates with the highest content of EPO gave the highest value of elongation at break which is 2393.56%. In the case of swelling index, it was found to increase as the amount of EPO increased.

scholarly journals TRANSITORY DEREPRESSION AND THE MAINTENANCE OF CONJUGATIVE PLASMIDS

Genetics ◽  
1986 ◽  
Vol 113 (3) ◽  
pp. 483-497
Author(s):  
Peter D Lundquist ◽  
Bruce R Levin
Keyword(s):  
Population Dynamics ◽  
Positive Selection ◽  
Low Frequencies ◽  
E Coli ◽  
Conjugative Plasmids ◽  
Bacterial Plasmids ◽  
Naturally Occurring ◽  
Chemostat Cultures ◽  
Selection For ◽  
K 12

ABSTRACT It has been proposed that bacterial plasmids cannot be maintained by infectious transfer alone and that their persistence requires positive selection for plasmid-borne genes. To test this hypothesis, the population dynamics of two laboratory and five naturally occurring conjugative plasmids were examined in chemostat cultures of E. coli K-12. Both laboratory plasmids and three of the five wild plasmids failed to increase in frequency when introduced at low frequencies. However, two of the naturally occurring plasmids rapidly increased in frequency, and bacteria carrying them achieved dominance in the absence of selection for known plasmid-borne genes. Three hypotheses for the invasion and persistence of these two plasmids were examined. It is concluded that although these two extrachromsomal genetic elements are repressed for conjugative pili synthesis, as a consequence of high rates of transfer during periods of transitory derepression in newly formed transconjugants, they become established and are maintained by infectious transfer alone. The implications of these observations to the theory of plasmid maintenance and the evolution of repressible conjugative pili synthesis are discussed.

scholarly journals Effects of Local Cooling Media on the Mechanical Properties of Heat Treated Mild Steel

2018 ◽  
Vol 3 (4) ◽  
pp. 27
Author(s):  
Adeyinka Adebayo ◽  
Joseph Temitope Stephen ◽  
Gbenga Joshua Adeyemi
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Yield Strength ◽  
Palm Oil ◽  
Microstructural Analysis ◽  
Shea Butter ◽  
Groundnut Oil ◽  
Local Cooling ◽  
Heat Treated ◽  
Cooling Media

This paper reports the effects of local cooling media (groundnut oil, palm oil, shea butter and air) on the mechanical properties of heat treated mild steel. Tensile test, hardness test and microstructural analysis were carried out on the heat treated and as-purchased specimens. The results show significant differences in the mechanical properties of the heat treated specimens. The hardness profile showed higher values for palm oil-cooled, shea butter-cooled, and the groundnut oil-cooled specimens in an increasing of order respectively when compared with as-purchased specimen with 194.9 VHN, while a decrease in hardness was recorded for the air-cooled specimen. Furthermore, the yield strength and ultimate tensile strength of the heat treated specimens obtained through the tensile test analysis showed an increase in yield strength for the groundnut oil-cooled (464.4 MPa) and the shea butter-cooled (412.9 MPa) specimens, and a decrease in yield strength for the air-cooled (358.3 MPa) and palm oil-cooled (307.7 MPa) specimens when compared with the as-purchased specimens (376.9 MPa). Also, the same trend was observed in the ultimate tensile strength (UTS) of the specimens. In contrast, the ductility improved in air-cooled specimen (40.28) while decreased in the specimen cooled in the media when compared with as-purchased specimens (34.22). Furthermore, microstructural analysis revealed that the groundnut oil-cooled specimens gave a microstructural quality than the other heat treated specimens.

scholarly journals Thermal and Mechanical Properties of Biocomposites Made of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Potato Pulp Powder

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 308 ◽  
Author(s):  
Maria Cristina Righetti ◽  
Patrizia Cinelli ◽  
Norma Mallegni ◽  
Andreas Stäbler ◽  
Andrea Lazzeri
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Circular Economy ◽  
Organic Waste ◽  
Mechanical Response ◽  
Thermal And Mechanical Properties ◽  
Biomass Valorization ◽  
Elongation At Break ◽  
Potato Pulp ◽  
Technical Requirements

The thermal and mechanical properties of biocomposites of poly(3-hydroxybutyrate-co- 3-hydroxyvalerate) (PHBV) containing 5 wt % of valerate units, with 20 wt % of potato pulp powder were investigated in order (i) to obtain information on possible miscibility/compatibility between the biopolymers and the potato pulp, and (ii) to quantify how the addition of this filler modifies the properties of the polymeric material. The potato pulp powder utilized is a residue of processing for the production and extraction of starch. The final aim of this study is the preparation of PHBV based materials with reduced cost, thanks to biomass valorization, in agreement with the circular economy policy, as result of the incorporation of agricultural organic waste. The results showed that the potato pulp powder does not act as reinforcement, but rather as filler for the PHBV polymeric matrix. A moderate loss in mechanical properties is detected (decrease in elastic modulus, tensile strength and elongation at break), which regardless still meets the technical requirements indicated for rigid packaging production. In order to improve the mechanical response of the PHBV/potato pulp powder biocomposites, surface treatment of the potato pulp powder with bio-based and petroleum-based waxes was investigated. Good enhancement of the mechanical properties was achieved with the natural carnauba and bee waxes.

Sign in / Sign up

Export Citation Format

Share Document