scholarly journals Variation of Durability and Strength Parameters of Pumice Based Mixtures

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3674
Author(s):  
Petr Lehner ◽  
Petr Konečný ◽  
Pratanu Ghosh
Keyword(s):  
Diffusion Coefficient ◽  
Portland Cement ◽  
Mean Squared Error ◽  
High Performance Concrete ◽  
Limit State ◽  
Cementitious Materials ◽  
Time Dependent ◽  
Supplementary Cementitious Materials ◽  
Ultimate Limit State ◽  
Concrete Mixtures

The numerical modelling of chloride penetration into concrete is very sensitive to the correct description of the input data. In the recent era, high-performance concrete (HPC), which combines Portland cement and other supplementary cementitious materials, has been gaining attraction due to their desirable material properties and durability. The presented results show the application of the modified approach for the evaluation of the suitability of the time-dependent model for the variation of the diffusion coefficient. The 26 various binary and ternary-based concrete mixtures blended with volcanic pumice pozzolan (VPP) as a major supplementary cementitious material (SCM) are compared with the reference Ordinary Portland Cement mixture. Other SCMs namely fly ash, slag, silica fume, and metakaolin were also utilized in ternary-based concrete mixtures. In-depth statistical analysis was carried out to show the variability and effects of the amount of the volcanic pumice as an SCM on the diffusion coefficient. The mean value and regression via linear approximation of the time-dependent coefficient of variation of the diffusion coefficients were used as well as the Root of Mean Squared Error approach. The presented results are suitable as the component of the input parameters for the durability-related probabilistic assessment of the reinforced concrete structures exposed to chlorides. In addition, the time-dependent ultimate limit state-related data was presented.

scholarly journals Long-term performance of sustainable pavements using ternary blended concrete with recycled aggregates

2021 ◽  
Author(s):  
Gilson Lomboy ◽  
Douglas Cleary ◽  
Seth Wagner ◽  
Yusef Mehta ◽  
Danielle Kennedy ◽  
...  
Keyword(s):  
Portland Cement ◽  
Cementitious Materials ◽  
Recycled Concrete ◽  
Supplementary Cementitious Materials ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Concrete Aggregates ◽  
Concrete Mixtures

Dwindling supplies of natural concrete aggregates, the cost of landfilling construction waste, and interest in sustainable design have increased the demand for recycled concrete aggregates (RCA) in new portland cement concrete mixtures. RCA repurposes waste material to provide useful ingredients for new construction applications. However, RCA can reduce the performance of the concrete. This study investigated the effectiveness of ternary blended binders, mixtures containing portland cement and two different supplementary cementitious materials, at mitigating performance losses of concrete mixtures with RCA materials. Concrete mixtures with different ternary binder combinations were batched with four recycled concrete aggregate materials. For the materials used, the study found that a blend of portland cement, Class C fly ash, and blast furnace slag produced the highest strength of ternary binder. At 50% replacement of virgin aggregates and ternary blended binder, some specimens showed comparable mechanical performance to a control mix of only portland cement as a binder and no RCA substitution. This study demonstrates that even at 50% RCA replacement, using the appropriate ternary binder can create a concrete mixture that performs similarly to a plain portland cement concrete without RCA, with the added benefit of being environmentally beneficial.

Homogenization Procedure Effect on Microscopical Performance of Concrete Containing Supplementary Cementitious Materials

2020 ◽  
Vol 995 ◽  
pp. 168-173
Author(s):  
Zdeněk Prošek ◽  
Vladimír Hrbek ◽  
Petr Bílý ◽  
Lukáš Vráblík
Keyword(s):  
High Performance ◽  
Chemical Resistance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Macro Level ◽  
Homogenization Procedure ◽  
Homogenization Process ◽  
Concrete Mixtures ◽  
Major Factors

The advantages of supplementary cementitious materials (SCM) use in concrete, such as reduced cement consumption and overall material improvement (durability, chemical resistance, etc.), are widely known. Our research focuses on two major factors connected to high performance concrete (HPC) containing SCM, the content of selected SCM and the homogenization process used for concrete mixture. Both of these aspects of this research were addressed by the authors from macro-level of the material. In this contribution, the focus is directed on microscopical performance of concrete mixtures with highest macro-mechanical features with respect to both homogenization procedure and SCM containment.

Carbonation Resistance of Sustainable Concrete Using Recycled Aggregate and Supplementary Cementitious Materials

2019 ◽  
Vol 803 ◽  
pp. 246-252 ◽  
Author(s):  
Ahmad Khartabil ◽  
Samer Al Martini
Keyword(s):  
Portland Cement ◽  
Construction Industry ◽  
Cementitious Materials ◽  
Chloride Penetration ◽  
Supplementary Cementitious Materials ◽  
Recycled Aggregate ◽  
Concrete Mixture ◽  
Sustainable Concrete ◽  
Concrete Mixtures ◽  
Carbonation Resistance

Green concrete is a recent sustainable practice in UAE that was enforced by Dubai Municipality in construction field within the emirate of Dubai to reduce the carbon foot print in construction industry and to increase the durability of the structures. This led the construction industry to reduce the usage of ordinary portland cement by replacing it with supplementary cementitious materials (SCMs) such as Grand Granulated Blast Furnace Slag (GGBS) and flyash (FA). Incorporating GGBS or FA in concrete mixtures can improve durability parameters of hardened concrete, such as resistance to water permeability, reduced water absorption and chloride penetration. This ultimately increases the structure’s service life by increasing the threshold of concrete mixture for chloride induced corrosion. On the other hand, carbonation induced corrosion to concrete is usually being ignored or forgotten generally, due its usual slow rate ingression in plain portland cement concrete mixtures. Several studies showed that incorporating some types of SCM – especially at high percentage - can reduce the concrete resistance to carbonation. Additionally and for concrete with recycled aggregate, carbonation investigation should be taken into consideration. This is since recycled aggregates are reused aggregates that are extracted from demolished structures and buildings which were already subjected to different environmental exposures and deteriorations. Unlike chloride penetration, there is no direct ASTM standard test to anticipate the concrete mixture resistance to carbonation at early ages. In this study, concrete mixtures with flyash and different recycled aggregate replacement percentages are investigated for carbonation resistance in accelerated proposed method, considering concrete mixtures’ key parameters like water-cement ratio, and total cement content. The results are analyzed to arrive to pertinent conclusions for the best utilization of sustainable concrete for carbonation resistance.

Flexural design of precast, prestressed ultra-high-performance concrete members

PCI Journal ◽  
2020 ◽  
Vol 65 (6) ◽  
pp. 35-61
Author(s):  
Chungwook Sim ◽  
Maher Tadros ◽  
David Gee ◽  
Micheal Asaad
Keyword(s):  
Prestressed Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Limit State ◽  
Design Guidelines ◽  
Design Tool ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Concrete Members ◽  
Cylinder Strength

Ultra-high-performance concrete (UHPC) is a special concrete mixture with outstanding mechanical and durability characteristics. It is a mixture of portland cement, supplementary cementitious materials, sand, and high-strength, high-aspect-ratio microfibers. In this paper, the authors propose flexural design guidelines for precast, prestressed concrete members made with concrete mixtures developed by precasters to meet minimum specific characteristics qualifying it to be called PCI-UHPC. Minimum specified cylinder strength is 10 ksi (69 MPa) at prestress release and 18 ksi (124 MPa) at the time the member is placed in service, typically 28 days. Minimum flexural cracking and tensile strengths of 1.5 and 2 ksi (10 and 14 MPa), respectively, according to ASTM C1609 testing specifications are required. In addition, strain-hardening and ductility requirements are specified. Tensile properties are shown to be more important for structural optimization than cylinder strength. Both building and bridge products are considered because the paper is focused on capacity rather than demand. Both service limit state and strength limit state are covered. When the contribution of fibers to capacity should be included and when they may be ignored is shown. It is further shown that the traditional equivalent rectangular stress block in compression can still be used to produce satisfactory results in prestressed concrete members. A spreadsheet workbook is offered online as a design tool. It is valid for multilayers of concrete of different strengths, rows of reinforcing bars of different grades, and prestressing strands. It produces moment-curvature diagrams and flexural capacity at ultimate strain. A fully worked-out example of a 250 ft (76.2 m) span decked I-beam of optimized shape is given.

Evaluation of strength of concrete on different initial exposure condition

2020 ◽  
Vol 13 ◽  
Author(s):  
Sri Ram Krishna Mishra ◽  
Pradeep Kumar Ghosh ◽  
Manoj Kulshreshtha
Keyword(s):  
Portland Cement ◽  
High Strength ◽  
Cementitious Materials ◽  
General Purpose ◽  
Supplementary Cementitious Materials ◽  
Exposure Condition ◽  
Portland Cement Concrete ◽  
Initial Exposure ◽  
Skilled Manpower ◽  
Standard Practices

Background: The previous studies have focused curing effect of mainly on high strength concrete, where strict supervision is maintained. This study is based upon general purpose concreting work for commercial and residential construction in absence of skilled manpower and supervision. Objective: The objective of this study is to establish a thumb rule to provide 7 days initial curing for maintaining quality for unsupervised concreting irrelevant to type of cement and grading. Methods: In this study concrete samples made with locally available commercial cements were cured for various initial exposure. Results: The results shows that concrete cured after a gap of 4 days from the time of de-moulding have given lowest strength as compared to concrete cured in standard practices i.e. where proper curing protocol had been followed. Conclusion: Initial curing is most important aspect of gaining desired strength. The findings after this study shows that curing affects the strength of concrete in variable grading. Initial curing has great importance for concrete with all types of Portland cement. Concrete with supplementary cementitious materials gives lowest strength initially but results higher strength after 28 days as compared to Portland cement.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

scholarly journals A Review of the Mechanical Properties and Durability of Ecological Concretes in a Cold Climate in Comparison to Standard Ordinary Portland Cement-Based Concrete

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3467
Author(s):  
Ankit Kothari ◽  
Karin Habermehl-Cwirzen ◽  
Hans Hedlund ◽  
Andrzej Cwirzen
Keyword(s):  
Carbon Dioxide ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Cementitious Materials ◽  
Cold Climate ◽  
Supplementary Cementitious Materials ◽  
Short Exposure ◽  
Chemical Admixtures ◽  
Composite Cements ◽  
Alkali Activated

Most of the currently used concretes are based on ordinary Portland cement (OPC) which results in a high carbon dioxide footprint and thus has a negative environmental impact. Replacing OPCs, partially or fully by ecological binders, i.e., supplementary cementitious materials (SCMs) or alternative binders, aims to decrease the carbon dioxide footprint. Both solutions introduced a number of technological problems, including their performance, when exposed to low, subfreezing temperatures during casting operations and the hardening stage. This review indicates that the present knowledge enables the production of OPC-based concretes at temperatures as low as −10 °C, without the need of any additional measures such as, e.g., heating. Conversely, composite cements containing SCMs or alkali-activated binders (AACs) showed mixed performances, ranging from inferior to superior in comparison with OPC. Most concretes based on composite cements require pre/post heat curing or only a short exposure to sub-zero temperatures. At the same time, certain alkali-activated systems performed very well even at −20 °C without the need for additional curing. Chemical admixtures developed for OPC do not always perform well in other binder systems. This review showed that there is only a limited knowledge on how chemical admixtures work in ecological concretes at low temperatures and how to accelerate the hydration rate of composite cements containing high amounts of SCMs or AACs, when these are cured at subfreezing temperatures.

scholarly journals Effects after 1500 Hardening Days on the Microstructure and Durability-Related Parameters of Mortars Produced by the Incorporation of Waste Glass Powder as a Clinker Replacement

2021 ◽  
Vol 13 (7) ◽  
pp. 3979
Author(s):  
Rosa María Tremiño ◽  
Teresa Real-Herraiz ◽  
Viviana Letelier ◽  
Fernando G. Branco ◽  
José Marcos Ortega
Keyword(s):  
Diffusion Coefficient ◽  
Water Absorption ◽  
Glass Powder ◽  
Cementitious Materials ◽  
Cement Industry ◽  
Waste Glass ◽  
Supplementary Cementitious Materials ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Waste Glass Powder

One of the ways of lessening the CO2 emissions of cement industry consists of replacing clinkers with supplementary cementitious materials. The required service life of real construction elements is long, so it is useful to characterize the performance of these materials in the very long term. Here, the influence of incorporating waste glass powder as a supplementary cementitious material, regarding the microstructure and durability of mortars after 1500 hardening days (approximately 4 years), compared with reference mortars without additions, was studied. The percentages of clinker replacement by glass powder were 10% and 20%. The microstructure was studied using impedance spectroscopy and mercury intrusion porosimetry. Differential thermal and X-ray diffraction analyses were performed for assessing the pozzolanic activity of glass powder at the end of the time period studied. Water absorption after immersion, the steady-state diffusion coefficient, and length change were also determined. In view of the results obtained, the microstructure of mortars that incorporated waste glass powder was more refined compared with the reference specimens. The global solid fraction and pores volume were very similar for all of the studied series. The addition of waste glass powder reduced the chloride diffusion coefficient of the mortars, without worsening their behaviour regarding water absorption after immersion.

Research Progress on the Hydration of Portland Cement with Calcined Clay and Limestone

2021 ◽  
Vol 1036 ◽  
pp. 240-246
Author(s):  
Jin Tang ◽  
Su Hua Ma ◽  
Wei Feng Li ◽  
Hui Yang ◽  
Xiao Dong Shen
Keyword(s):  
Mechanical Properties ◽  
Portland Cement ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Research Progress ◽  
Hydration Reaction ◽  
Hydration Products ◽  
Early Hydration ◽  
Calcined Clay ◽  
Dense Microstructure

The use of calcined clay and limestone as supplementary cementitious materials, can have a certain influence on the hydration of Portland cement. This paper reviewed the influence of limestone and calcined clay and the mixture of limestone and calcined clay on the hydration of cement. Both limestone and calcined clay accelerate the hydration reaction in the early hydration age and enhance the properties of cement. Limestone reacts with C3A to form carboaluminate, which indirectly stabilized the presence of ettringite, while calcined clay consumed portlandite to form C-(A)-S-H gel, additional hydration products promote the densification of pore structure and increase the mechanical properties. The synergistic effect of calcined clay and limestone stabilize the existence of ettringite and stimulate the further formation of carboaluminate, as well as the C-(A)-S-H gel, contributed to a dense microstructure.

Sign in / Sign up

Export Citation Format

Share Document