scholarly journals Incorporation of Waste Glass as an Activator in Class-C Fly Ash/GGBS Based Alkali Activated Material

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3906
Author(s):  
Sasui Sasui ◽  
Gyuyong Kim ◽  
Jeongsoo Nam ◽  
Arie van Riessen ◽  
Hamin Eu ◽  
...  
Keyword(s):  
Fly Ash ◽  
Strength Loss ◽  
Waste Glass ◽  
Main Reaction ◽  
Main Reaction Product ◽  
X Ray ◽  
Granulated Blast Furnace Slag ◽  
Alkali Solutions ◽  
Class C ◽  
Alkali Activated

In this study, an alkaline activator was synthesized by dissolving waste glass powder (WGP) in NaOH-4M solution to explore its effects on the formation of alkali-activated material (AAM) generated by Class-C fly ash (FA) and ground granulated blast furnace slag (GGBS). The compressive strength, flexure strength, porosity and water absorption were measured, and X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray (SEM-EDX) were used to study the crystalline phases, hydration mechanism and microstructure of the resulting composites. Results indicated that the composition of alkali solutions and the ratios of FA/GGBS were significant in enhancing the properties of the obtained AAM. As the amount of dissolved WGP increased in alkaline solution, the silicon concentration increased, causing the accelerated reactivity of FA/GGBS to develop Ca-based hydrate gel as the main reaction product in the system, thereby increasing the strength and lowering the porosity. Further increase in WGP dissolution led to strength loss and increased porosity, which were believed to be due to the excessive water demand of FA/GGBS composites to achieve optimum mixing consistency. Increasing the GGBS proportion in a composite appeared to improve the strength and lower the porosity owing to the reactivity of GGBS being higher than that of FA, which contributed to develop C-S-H-type hydration.

scholarly journals Strength and Microstructure of Class-C Fly Ash and GGBS Blend Geopolymer Activated in NaOH & NaOH + Na2SiO3

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 59 ◽  
Author(s):  
Sasui Sasui ◽  
Gyuyong Kim ◽  
Jeongsoo Nam ◽  
Tomoyuki Koyama ◽  
Sant Chansomsak
Keyword(s):  
Fly Ash ◽  
Setting Time ◽  
Strength Loss ◽  
Ash Content ◽  
Compact Structure ◽  
Granulated Blast Furnace Slag ◽  
Silica Source ◽  
Class C ◽  
Xrd Patterns ◽  
Furnace Slag

In this paper, class-C fly ash (FA) and ground granulated blast-furnace slag (GGBS)-based geopolymer activated in NaOH and NaOH + Na2SiO3 was studied regarding setting time, compressive strength, porosity, microstructure, and formation of crystalline phases. When comparing the effects of alkali type on the FA and GGBS geopolymer composites, results revealed that NaOH has a lesser effect in developing strength and denser microstructure than does NaOH + Na2SiO3, since the addition of Na2SiO3 provides the silica source to develop more compact structure. Incorporation of Na2SiO3 reduced the crystallinity and the paste was more amorphous compared to NaOH activated pastes. The class-C FA and GGBS blends resulted in prolonged setting time, reduced strength, and loose matrix with the increase in fly ash content. The un-reactivity of calcium in blends was observed with increasing fly ash content, leading to strength loss. It is evident from XRD patterns that calcium in fly ash did not contribute in forming C-S-H bond, but formation of crystalline calcite was observed. Furthermore, XRD analyses revealed that the reduction in fly ash leads to the reduction in crystallinity, and SEM micrographs showed the unreactive fly ash particles, which hinder the formation of a denser matrix.

scholarly journals Influence of calcium and alumina-based pozzolanas on the strength properties of low calcium fly ash geopolymer concrete

2021 ◽  
Vol 309 ◽  
pp. 01104
Author(s):  
K Saiteja Chary ◽  
S Shrihari ◽  
V Siva Prasad Raju ◽  
V Srinivasa Reddy
Keyword(s):  
Fly Ash ◽  
Strength Properties ◽  
Main Reaction ◽  
Geopolymer Concrete ◽  
Main Reaction Product ◽  
Strength Performance ◽  
Sodium Aluminosilicate ◽  
Granulated Blast Furnace Slag ◽  
Calcium Aluminosilicate ◽  
Sodium Aluminosilicate Hydrate

This work presents the effect of Ground granulated blast furnace slag (GGBS), fly ash (FA) and metakaolin (MK) on the strength properties of geopolymer concrete (GPC). Geopolymer concrete made with FA produces calcium aluminosilicate hydrate (C-A-S-H) product due to presence of alumina and sodium aluminosilicate hydrate (N-A-S-H) gel as main reaction product of polymerization. Geopolymer concrete made with FA and GGBS, calcium silicate hydrate (C-S-H) also gets produced additionally with calcium aluminosilicate hydrate (C-A-S-H) gel and sodium aluminosilicate hydrate (N-A-S-H) gel due to presence of high content of CaO in GGBS. This additional product imparts more strength performance in GPC. In geopolymer concrete made with FA and MK, the more amount of calcium aluminosilicate hydrate (C-A-S-H) is produced due to presence of high amount of alumina in metakaolin along with sodium aluminosilicate hydrates (N-A-S-H) giving more strength to GPC. Metakaolin is recommended to be used for the development of GPC because it has high amount of alumina.

Effects of waste glass as a sand replacement on the strength and durability of fly ash/GGBS based alkali activated mortar

2021 ◽  
Author(s):  
Sasui Sasui ◽  
Gyuyong Kim ◽  
Jeongsoo Nam ◽  
Arie van Riessen ◽  
Marijana Hadzima-Nyarko
Keyword(s):  
Fly Ash ◽  
Waste Glass ◽  
Strength And Durability ◽  
Alkali Activated

Mechanical Properties of Mortars Prepared by Alkali Activated Fly Ash Coming from Different Production Batches

2015 ◽  
Vol 244 ◽  
pp. 140-145 ◽  
Author(s):  
Matej Špak ◽  
Pavel Raschman
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Construction Materials ◽  
Chemical Properties ◽  
Raw Material ◽  
Fly Ashes ◽  
Coal Burning ◽  
Alkali Solutions ◽  
One Year ◽  
Alkali Activated

Fly ash is a well utilizable secondary raw material for the production of alkali activated construction materials. It is a significant alumina-silicates source suitable for the chemical reaction resulting in hardened composites. Physical and chemical properties of fly ashes as a co-product of coal burning mainly depend on characteristics of coal, burning temperature and combustion conditions. High variability of the properties of fly ash causes an uncertainty in the properties of alkali activated mortars. Time behaviour of the composition of the fly ash produced in a heating plant located in Košice, Slovakia as well as leaching behaviour of both alumina and silica from particular batches during one-year period was documented. Leaching tests were carried out using the distilled water and alkali solutions with three different concentrations. Both compressive and tensile strengths of alkali activated mortars were measured, and the correlation between the mechanical properties of hardened mortars and the chemical composition of fly ashes as well as their leaching characteristics was investigated.

Solid-state reaction of Pt thin film with single-crystal (001) β–SiC

1994 ◽  
Vol 9 (3) ◽  
pp. 648-657 ◽  
Author(s):  
J.S. Chen ◽  
E. Kolawa ◽  
M-A. Nicolet ◽  
R.P. Ruiz ◽  
L. Baud ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Solid State ◽  
Single Crystal ◽  
Atomic Scale ◽  
Solid State Reactions ◽  
Main Reaction ◽  
Main Reaction Product ◽  
X Ray Diffraction ◽  
X Ray ◽  
Amorphous Interlayer

Thermally induced solid-state reactions between a 70 nm Pt film and a single-crystal (001) β-SiC substrate at temperatures from 300 °C to 1000 °C for various time durations are investigated by 2 MeV He backscattering spectrometry, x-ray diffraction, secondary ion mass spectrometry, scanning electron microscopy, and cross-sectional transmission electron microscopy. Backscattering spectrometry shows that Pt reacts with SiC at 500 °C. The product phase identified by x-ray diffraction is Pt3Si. At 600–900 °C, the main reaction product is Pt2Si, but the depth distribution of the Pt atoms changes with annealing temperature. When the sample is annealed at 1000 °C, the surface morphology deteriorates with the formation of some dendrite-like hillocks; both Pt2Si and PtSi are detected by x-ray diffraction. Samples annealed at 500–900 °C have a double-layer structure with a silicide surface layer and a carbon-silicide mixed layer below in contact with the substrate. The SiC—Pt interaction is resolved at an atomic scale with high-resolution electron microscopy. It is found that the grains of the sputtered Pt film first align themselves preferentially along an orientation of {111}Pt//{001}SiC without reaction between Pt and SiC. A thin amorphous interlayer then forms at 400 °C. At 450 °C, a new crystalline phase nucleates discretely at the Pt-interlayer interface and projects into or across the amorphous interlayer toward the SiC, while the undisturbed amorphous interlayer between the newly formed crystallites maintains its thickness. These nuclei grow extensively down into the substrate region at 500 °C, and the rest of the Pt film is converted to Pt3Si. Comparison between the thermal reaction of SiC-Pt and that of Si–Pt is discussed.

scholarly journals Effects of Composition Type and Activator on Fly Ash-Based Alkali Activated Materials

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 63
Author(s):  
Chan-Yi Lin ◽  
Tai-An Chen
Keyword(s):  
Fly Ash ◽  
Sodium Hydroxide ◽  
Blast Furnace Slag ◽  
Raw Material ◽  
Granulated Blast Furnace Slag ◽  
Different Types ◽  
Short And Long Term ◽  
Furnace Slag ◽  
Alkali Activated

The compressive strengths of fly ash-based alkali-activated materials (AAM), produced using various activators of only sodium hydroxide, were measured. Fly ash-based AAM specimens, produced by mixing different kinds of fly ash and ground granulated blast-furnace slag (GGBFs) with an activator containing only sodium hydroxide, were cured at ambient temperature, and then placed in air for different numbers of days. The short- and long-term compressive strengths and shrinkage of fly ash-based AAM were measured and compared to one another. The effects of type of fly ash, alkali-equivalent content, GGBFs replace percentage, and ages on the compressive strengths and shrinkage of fly ash-based AAM were investigated. Even when different fly ash was used as the raw material for AAM, a similar compressive strength can be achieved by alkali-equivalent content, GGBFs replaces percentage. However, the performance of shrinkage due to different types of fly ash differed significantly.

Sign in / Sign up

Export Citation Format

Share Document