scholarly journals Effects of Composition Type and Activator on Fly Ash-Based Alkali Activated Materials

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 63
Author(s):  
Chan-Yi Lin ◽  
Tai-An Chen
Keyword(s):  
Fly Ash ◽  
Sodium Hydroxide ◽  
Blast Furnace Slag ◽  
Raw Material ◽  
Granulated Blast Furnace Slag ◽  
Different Types ◽  
Short And Long Term ◽  
Furnace Slag ◽  
Alkali Activated

The compressive strengths of fly ash-based alkali-activated materials (AAM), produced using various activators of only sodium hydroxide, were measured. Fly ash-based AAM specimens, produced by mixing different kinds of fly ash and ground granulated blast-furnace slag (GGBFs) with an activator containing only sodium hydroxide, were cured at ambient temperature, and then placed in air for different numbers of days. The short- and long-term compressive strengths and shrinkage of fly ash-based AAM were measured and compared to one another. The effects of type of fly ash, alkali-equivalent content, GGBFs replace percentage, and ages on the compressive strengths and shrinkage of fly ash-based AAM were investigated. Even when different fly ash was used as the raw material for AAM, a similar compressive strength can be achieved by alkali-equivalent content, GGBFs replaces percentage. However, the performance of shrinkage due to different types of fly ash differed significantly.

scholarly journals Characteristics of Blended Geopolymer Concrete Using Ultrafine Ground Granulated Blast Furnace Slag and Copper Slag

2020 ◽  
Vol 44 (6) ◽  
pp. 433-439
Author(s):  
Vijayasarathy Rathanasalam ◽  
Jayabalan Perumalsami ◽  
Karthikeyan Jayakumar
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Blast Furnace Slag ◽  
Copper Slag ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Strength Performance ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

This paper presents the properties of blended geopolymer concrete manufactured using fly ash and ultrafine Ground Granulated Blast Furnace Slag (UFGGBFS), along with the copper slag (CPS) as replacement of fine aggregate (crushed stone sand). Various parameters considered in this study include different sodium hydroxide concentrations (10M, 12M and 14M); 0.35 as alkaline liquid to binder ratio; 2.5 as sodium silicate to sodium hydroxide ratio and cured in ambient curing condition. Further, geopolymer concrete was manufactured using fly ash as the prime source material which is replaced with UFGGBFS (0%, 5%, 10% and 15%). Copper slag has been used as replacement of fine aggregate in this study. Properties of the fresh manufactured geopolymer concrete were studied by slump test. Compressive strength of the manufactured geopolymer concrete was tested and recorded after curing for 3, 7 and 28 days. Microstructure Characterization of Geopolymer concrete specimens was done by Scanning Electron Microscope (SEM) analysis. Experimental results revealed that the addition of UFGGBFS resulted in an increased strength performance of geopolymer concrete. Also, this study demonstrated that the strength of geopolymer concrete increased with an increase in sodium hydroxide concentration. SEM results revealed that the addition of UFGGBFS resulted in a dense structure.

scholarly journals The Effects of Aluminium Sulphate on Slag Paste Activated with Sodium Hydroxide and Sodium Silicate

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2286
Author(s):  
Taewan Kim ◽  
Sungnam Hong ◽  
Choonghyun Kang
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Sodium Hydroxide ◽  
Blast Furnace Slag ◽  
Aluminium Sulphate ◽  
The Third ◽  
Granulated Blast Furnace Slag ◽  
Activated Slag ◽  
Furnace Slag ◽  
Alkali Activated

This study investigates the characteristics of alkali-activated slag cement using aluminium sulphate (ALS) as an activator. The alkalis NaOH and Na2SiO3 were used as additional activators (denoted by alkali) at 5% and 10% of the weight of the ground granulated blast furnace slag (GGBFS). Three types of activators were considered. The first was when ALS was used alone. For the second, ALS and 5% alkali were used together. The third was when ALS and 10% alkali were used. ALS was used at concentrations of 2%, 4%, 6%, 8%, and 10% based on binder weight. Experimental results show that when ALS was used as a sole activator, the activity of GGBFS was low and its strength was below 1 MPa. However, compressive strength was improved when 5% or 10% alkali and ALS were used at the same time. This was effective at improving mechanical and microstructural performance when used with an additional activator capable of forming a more alkaline environment than using ALS as a sole activator.

Effect of Sodium Hydroxide (NaOH) Concentration on Compressive Strength of Alkali-Activated Slag (AAS) Mortars

2015 ◽  
Vol 754-755 ◽  
pp. 300-304 ◽  
Author(s):  
Aimi Noorliyana Hashim ◽  
Kamarudin Hussin ◽  
Noorzahan Begum ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Kamrosni Abdul Razak ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Sodium Hydroxide ◽  
Blast Furnace Slag ◽  
Alkali Activated Slag ◽  
Granulated Blast Furnace Slag ◽  
Environmental Friendly ◽  
Activated Slag ◽  
Furnace Slag ◽  
Alkali Activated

Energy saving in building technology is among the most critical problems in the world. Thus it is a need to develop sustainable alternatives to conventional concrete utilizing more environmental friendly materials. One of the possibilities to work out is the massive usage of industrial wastes like ground granulated blast furnace slag (GGBS) to turn them to useful environmental friendly and technologically advantageous cementitious materials. In this study, ground granulated blast furnace slag (GGBS) is used to produce of alkali activated slag (AAS) mortar with the effect of alkaline activator concentration. Alkali activated slag (AAS) mortar is accelerated using alkaline solution of sodium silicate mixed with sodium hydroxide. The fixed ratio of sodium silicate to sodium hydroxide is 1.7 and the concentration of sodium hydroxide is varied from 6M to 12M. Concentration of 10M NaOH promotes the best properties of mortar by achieving the greatest compressive strength. Substitution of mineral admixture also influences strength performance of AAS mortars. The mortar with 20% calcium carbonate demonstrates the maximum compressive strength. The used of alkaline activation system is the best method to prepare industrial byproduct concrete. Moreover, alkali activated product itself gains superior properties which lead to the system become the most interesting method to produce sustainable concrete.

scholarly journals Durability Experiences on the Traditional and SCM Founded Blended Concrete

2021 ◽  
pp. 1-4
Author(s):  
Eti Tirumala Chakrapani ◽  
◽  
A M N Kashyap ◽  
G Anjaneyulu ◽  
M R Manikanta ◽  
...  
Keyword(s):  
Fly Ash ◽  
Environmental Sustainability ◽  
Blast Furnace Slag ◽  
Construction Material ◽  
Industrial Wastes ◽  
Raw Material ◽  
Granulated Blast Furnace Slag ◽  
Chemical Admixtures ◽  
Cement Manufacture ◽  
Furnace Slag

Concrete might be the maximum substantially used construction material in the global with approximately six billion tones being produced each year. It is best subsequent to water in phrases of in keeping with-capita consumption. However, environmental sustainability is at stake both in terms of damage due to the extraction of raw material and CO2 emission all through cement manufacture. This brought pressures on researchers for the discount of cement intake by means of partial substitute of cement by using supplementary materials. These materials may be obviously happening, industrial wastes or by way of-products that are less energy extensive. Fly ash and Ground Granulated Burnt Slag (GGBS) are selected specifically based totally on the standards of fee and their long lasting qualities., Not best this, Environmental pollution also can be decreased to a point due to the fact the emission of dangerous gases like carbon monoxide & carbon dioxide are very restricted. These substances (referred to as pozzalonas) when combined with calcium hydroxide, reveals cementitious compositions. Most commonly used pozzalonas are fly ash, silica fume, met kaolin, ground granulated blast furnace slag (GGBS). This wishes to look at the admixtures performance whilst combined with concrete so as to ensure a discounted existence cycle fee. The present research consists of three phases and reports the specializes in investigating characteristics of M35grade concrete .In the 1st phase the behavior of standard and SCM concrete (7.5%FA and 7.5%GGBS) of M35 grade specimens with different percentages of chemical admixtures curing with acids such as HCL. 2nd phase the same grade of specimens curing with Alkaline such as NaOH and in the 3rd phase the same grade of specimens curing with sulphate solution MgSO4 and finally assess the losses of mechanical properties and durability considerations of the concrete due to these conditions were reported.

Effect of the Combined Using of Fly Ash and Granulated Blast Furnace Slag on Properties of Cementless Alkali-Activated Mortar

2011 ◽  
Vol 287-290 ◽  
pp. 916-921
Author(s):  
Kyung Taek Koh ◽  
Gum Sung Ryu ◽  
Si Hwan Kim ◽  
Jang Hwa Lee
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Curing Temperature ◽  
Mixture Ratio ◽  
Granulated Blast Furnace Slag ◽  
Alkaline Activator ◽  
Furnace Slag ◽  
Alkali Activated

This paper examines the effects of the mixture ratio of fly ash/slag, the type of alkaline activators and curing conditions on the workability, compressive strength and microstructure of cementless alkali-activated mortar. The investigation showed that the mixture ratio of fly ash/slag and the type of alkaline activator have significant influence on the workability and strength, whereas the curing temperature has relatively poor effect. An alkali-activated mortar using a binder composed of 50% of fly ash and 50% of granulated blast furnace slag and alkaline activator made of 9M NaOH and sodium silicate in proportion of 1:1 is seen to be able to develop a compressive strength of 65 MPa at age of 28 days even when cured at ambient temperature of 20°C.

Sign in / Sign up

Export Citation Format

Share Document