scholarly journals Fire Performance of Heavyweight Self-Compacting Concrete and Heavyweight High Strength Concrete

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 822 ◽  
Author(s):  
Farhad Aslani ◽  
Fatemeh Hamidi ◽  
Qilong Ma
Keyword(s):  
Compressive Strength ◽  
Mass Loss ◽  
Modulus Of Elasticity ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Self Compacting Concrete ◽  
Strength Concrete ◽  
Magnetite Content ◽  
Hardened State

In this study, the fresh and hardened state properties of heavyweight self-compacting concrete (HWSCC) and heavyweight high strength concrete (HWHSC) containing heavyweight magnetite aggregate with 50, 75, and 100% replacement ratio, and their performance at elevated temperatures were explored experimentally. For fresh-state properties, the flowability and passing ability of HWSCCs were assessed by using slump flow, T500 mm, and J-ring tests. Hardened-state properties including hardened density, compressive strength, and modulus of elasticity were evaluated after 28 days of mixing. High-temperature tests were also performed to study the mass loss, spalling of HWSCC and HWHSC, and residual mechanical properties at 100, 300, 600 and 900 °C with a heating rate of 5 °C/min. Ultimately, by using the experimental data, rational numerical models were established to predict the compressive strength and modulus of elasticity of HWSCC at elevated temperatures. The results of the flowability and passing ability revealed that the addition of magnetite aggregate would not deteriorate the workability of HWSCCs and they retained their self-compacting characteristics. Based on the hardened densities, only self-compacting concrete (SCC) with 100% magnetite content, and high strength concrete (HSC) with 75 and 100% magnetite aggregate can be considered as HWC. For both the compressive strength and elastic modulus, decreasing trends were observed by introducing magnetite aggregate to SCC and HSC at an ambient temperature. Mass loss and spalling evaluations showed severe crack propagation for SCC without magnetite aggregate while SCCs containing magnetite aggregate preserved up to 900 °C. Nevertheless, the mass loss of SCCs containing 75 and 100% magnetite content were higher than that of SCC without magnetite. Due to the pressure build-up, HSCs with and without magnetite showed explosive spalling at high temperatures. The residual mechanical properties analysis indicated that the highest retention of the compressive strength and modulus of elasticity after exposure to elevated temperatures belonged to HWSCC with 100% magnetite content.

Performance Deterioration of High Strength Concrete under Mixed Erosion and Freeze-Thaw Cycling

2010 ◽  
Vol 163-167 ◽  
pp. 1655-1660
Author(s):  
Jian Zhang ◽  
Bo Diao ◽  
Xiao Ning Zheng ◽  
Yan Dong Li
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Mass Loss ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
High Strength Concrete ◽  
High Strength ◽  
Freeze Thaw ◽  
Strength Concrete ◽  
Dynamic Modulus Of Elasticity

The mechanical properties of high strength concrete(HSC) were experimentally investigated under mixed erosion and freeze-thaw cycling according to ASTM C666(Procedure B), the erosion solution was mixed by weight of 3% sodium chloride and 5% sodium sulfate. The mass loss, relative dynamic modulus of elasticity, compressive strength, elastic modulus and other relative data were measured. The results showed that with the increasing number of freeze-thaw cycles, the surface scaled more seriously; the mass loss, compressive strength and elastic modulus continued to decrease; the relative dynamic modulus of elasticity increased slightly in the first 225 freeze-thaw cycles, then decreased in the following 75 cycles; the corresponding strain to peak stress decreased with the increase of freeze-thaw cycles. After 200 cycles, the rate of deterioration of concrete accelerated obviously.

Properties of High Strength Concrete with Calcined Diatomaceous Earth as Cement Replacement under Compression

2020 ◽  
Vol 402 ◽  
pp. 7-13
Author(s):  
Muttaqin Hasan ◽  
Aris Muyasir ◽  
Taufiq Saidi ◽  
Husaini ◽  
Raudha Azzahra
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
High Strength Concrete ◽  
Diatomaceous Earth ◽  
High Strength ◽  
Compression Load ◽  
Strength Concrete ◽  
Cement Replacement ◽  
Concrete Mixtures ◽  
Compressive Strength Of Concrete

In this research, calcined diatomaceous earth from Aceh Besar, Indonesia was used as cement replacement in producing high strength concrete. Four concrete mixtures in which the percentage of cement replacement of 0%, 5%, 10% and 15% by weight were studied. Four cylinder-specimens with 100 mm diameter and 200 mm high were prepared for each mixture. The compression load was applied on the specimens at the age of 28 days until the specimens failed. The mixture without calcined diatomaceous earth was more workable than that with diatomaceous earth. The compressive strength of concrete with diatomaceous earth in this study was almost the same for all mixture. However, those compressive strength was lower than the compressive strength of concrete without calcined diatomaceous earth for about 14.6%. Modulus of elasticity of high strength concrete decreased with increasing of cement replacement percentage.

scholarly journals Effect of Steel Fiber Aspect Ratio on the Properties of High Strength Self Compacting Concrete

2019 ◽  
Vol 9 (2) ◽  
pp. 2938-2941
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Steel Fibers ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Strength Concrete ◽  
Fiber Aspect Ratio ◽  
Aspect Ratios ◽  
Hardened Properties

The High strength concrete defined as per IS 456 as the concrete having characteristic compressive strength more than 65 MPa. The self-compacting concrete has lot of advantages including concreting at congested reinforcement locations, better finish, good compaction etc. The inclusion of fibers in the concrete mix decreases the brittle nature of concrete thereby the ductility increases. Different types of fibers are available for inclusion in concrete like steel, glass, polypropylene, basalt, etc. In the present investigation, high strength concrete having characteristic strength of 90 MPa was developed and hooked ended steel fibers are used and the hardened properties are determined. Steel fibers having diameter of 1 mm and lengths of 25 and 50 mm were added to concrete in 0.125%, 0.25% and 0.5% by volume of concrete. Three hardened properties compressive strength, split tensile Strength and flexural strength were determined. Out of the two lengths of fiber i.e with two aspect ratios, the fiber with 50 mm length yielded better results.

Effect Of Specimen Size and Shape on Compressive Strength of Self-Compacting Concrete

2014 ◽  
Vol 7 (2) ◽  
pp. 16-29
Author(s):  
Mohammed Karem Abd ◽  
Zuhair Dhaher Habeeb
Keyword(s):  
Compressive Strength ◽  
Correction Factor ◽  
High Strength Concrete ◽  
High Strength ◽  
Specimen Size ◽  
Self Compacting Concrete ◽  
Normal Concrete ◽  
Cube Strength ◽  
Strength Concrete ◽  
Size And Shape

This study aims to show the effect of specimen size and shape on compressive strength of self-compacting concrete (SCC). The work is divided into two parts, the first was to designed Normal Concrete (NC), High Strength Concrete (HSC) and Self Compacting Concrete (SCC) of strength between (25-70) MPa. from locally available materials. The values percent of cylinder to cube strength were between (0.86-0.9), (0.94-0.96), (0.96-0.99) of NC, HSC and SCC respectively.The second is to investigate the effect of specimen size on compressive strength, the values of correction factor of cube specimens (150*150*150)mm and (100*100*100)mm is (0.89-1.29), (0.98-1.26) and (0.98-1.22) of NC,HSC and SCC respectively. The values of correction factor of cylinder specimens of (150*300) mm and (100*200) mm is (0.88-1.08), (0.93-1.07) and (0.95-1.04) of NC, HSC and SCC respectively.

scholarly journals Behavior of High Strength Concrete Subjected to Elevated Temperature

2019 ◽  
Vol 9 (2) ◽  
pp. 2997-3000
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
High Strength ◽  
Air Cooling ◽  
Split Tensile Strength ◽  
Strength Concrete ◽  
Hardened Properties ◽  
Compressive Strength Of Concrete

The High strength concrete defined as per IS 456 as the concrete having characteristic compressive strength more than 65 MPa. The concrete when subject to fire i.e. elevated temperatures loses its properties at a rapid rate. In the present investigation, ordinary vibrated concrete of M90 grade was developed as per the IS 10262. The hardened properties of concrete like compressive strength and split tensile strength were determined for concrete at ordinary temperature. The concrete specimens were subjected to elevated temperatures of 400oC, 600 oC, and 800 oC and then the specimens were brought to room temperature under different cooling regimes like air cooling and water quenching. The compressive residual strength of concrete was determined and a typical compared was made with the control specimen. The decrease in compressive strength of concrete at 800 oC was high compared to that at 400 oC.

scholarly journals Physical and Mechanical Properties of High-Strength Concrete Modified with Supplementary Cementitious Materials after Exposure to Elevated Temperature up to 1000 °C

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 532 ◽  
Author(s):  
Jianwei Zhou ◽  
Dong Lu ◽  
Yuxuan Yang ◽  
Yue Gong ◽  
Xudong Ma ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Physical Properties ◽  
Water Absorption ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Strength Concrete

This paper presents the experimental findings of a study on the influence of combining usage of supplementary cementitious materials (SCMs) on the performance of high-strength concrete (HSC) subjected to elevated temperatures. In this study, four types of HSC formulations were prepared: HSC made from cement and fly ash (FA), HSC made from cement and ultra-fine fly ash (UFFA), HSC made from cement and UFFA-metakaolin (MK), and HSC made from cement and FA-UFFA-MK. Mechanical and physical properties of HSC subjected to high temperatures (400, 600, 800, and 1000 °C) were studied. Furthermore, the relation between residual compressive strength and physical properties (loss mass, water absorption, and porosity) of HSC was developed. Results showed that the combined usage of SCMs had limited influence on the early-age strength of HSC, while the 28-d strength had been significantly affected. At 1000 °C, the residual compressive strength retained 18.7 MPa and 23.9 MPa for concretes containing 30% UFFA-5% MK and 10% FA-20% UFFA-5% MK, respectively. The specimen containing FA-UFFA-MK showed the best physical properties when the temperature raised above 600 °C. Combined usage of SCMs (10% FA-20% UFFA-5% MK) showed the lowest mass loss (9.2%), water absorption (10.9%) and porosity (28.6%) at 1000 °C. There was a strongly correlated relation between residual strength and physical properties of HSC exposed to elevated temperatures.

The Modulus of Elasticity of High-Strength Concrete

2011 ◽  
Vol 261-263 ◽  
pp. 233-237 ◽  
Author(s):  
Zhao Hui Lu ◽  
Zhi Wu Yu ◽  
Yan Gang Zhao
Keyword(s):  
Experimental Data ◽  
Compressive Strength ◽  
Empirical Model ◽  
Modulus Of Elasticity ◽  
High Strength Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Plain Concrete ◽  
Strength Concrete ◽  
Wide Range

The paper discusses the modulus of elasticity of plain concrete for a wide range of compressive strength. A large volume of selected experimental data has been collected from existing literature and then analyzed. Particular emphasis has been given to studying the effects of concrete compressive strength and the type of coarse aggregate on the modulus of elasticity of plain concrete. The adequacy and applicability of the existing models for predicting the modulus of elasticity of high-strength concrete has been critically examined, and a new empirical model is proposed to cover concrete strength up to 125 MPa. The new empirical model seems to perform much better when applied to the published experimental data on normal weight concrete over a wide strength range.

Effect of Polypropylene Macro-Fiber on Properties of High-Strength Concrete at Elevated Temperatures

2014 ◽  
Vol 629-630 ◽  
pp. 284-290 ◽  
Author(s):  
Xu Jing Niu ◽  
Qing Xin Zhao ◽  
Ying Nie
Keyword(s):  
Flexural Strength ◽  
Mass Loss ◽  
Water Absorption ◽  
High Strength Concrete ◽  
Loss Rate ◽  
Elevated Temperatures ◽  
Mass Loss Rate ◽  
High Strength ◽  
Hybrid Fibers ◽  
Strength Concrete

After being subjected to different elevated temperatures, ranging between 200 °C and 800 °C, the flexural strength, matrix mass loss rate and water absorption of polypropylene (PP) macro-fiber reinforced high strength concrete (HSC) were investigated. Moreover, the internal damage of concrete was analyzed by the ultrasonic non-destructive testing technology. The results indicate that PP macro-fiber in HSC has an adverse effect on flexural strength, while the synergistic effect of hybrid fibers (PP micro-fiber plus PP macro-fiber) can minimize this effect. Compared with PP micro-fiber, PP macro-fiber is more effective in increasing the matrix mass loss rate and water absorption of HSC. However, if the dosage of PP macro-fiber is too high, the pressure relief channels formed by fibers melt will be too coarse, and the total porosity of HSC will be increased significantly. Finally, a mathematical model relating the damage degree to temperature was established based on the non-linear fitting of the experimental data.

Sign in / Sign up

Export Citation Format

Share Document