Optimal Replacement of Granite Modified with Ife Iron and Steel Slag on Strength Properties of Concrete

Steel is produced from iron ore and purification of metal scrap, leading to manufacture of hundreds of tonnes of steel slag each year. This study investigated the optimum replacement of granite with Ife Iron and Steel Nigeria Limited (ISN) slag that produce maximum Compressive Strength (CS), Split Tensile Strength (STS) and Flexural Strength (FS) of concrete using Response Surface Methodology (RSM) from Design Expert Version 7.0. The outcome of the study showed that the optimum replacement of granite with ISN was 28.85% ISN at 0.47 W/C.

Experimental Investigation on Making of Plastic Brick

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis Juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using Prosopis Juliflora ash (PJA) as cementitious material by partially (5%, 10% and 15%) replacing cement by Prosopis Juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix. In order to save the environment and to save the resources we have come up with using the Prosopis Juliflora (Semai-Karuvelam in Tamil) ash as the partial replacement of cement. Cement will produce equal amount of greenhouse gas (co2) which increase the global warming. As the amount of cement is reduced greenhouse gases also reduced. Utilization of Juliflora ash as a partial substitution for cement is one of the promising methods to increase the strength and thermal insulation for cement blocks. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended Prosopis Juliflora cement are evaluated.

Experimental Project on Concrete - Partial Replacement of Cement by Prosopis Juliflora

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis Juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using Prosopis Juliflora ash (PJA) as cementitious material by partially (5%, 10% and 15%) replacing cement by Prosopis Juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix. In order to save the environment and to save the resources we have come up with using the Prosopis Juliflora (Semai-Karuvelam in Tamil) ash as the partial replacement of cement. Cement will produce equal amount of greenhouse gas (co2) which increase the global warming. As the amount of cement is reduced greenhouse gases also reduced. Utilization of Juliflora ash as a partial substitution for cement is one of the promising methods to increase the strength and thermal insulation for cement blocks. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended Prosopis Juliflora cement are evaluated.

Mix Design and Engineering Properties of Fiber-Reinforced Pervious Concrete Using Lightweight Aggregates

The main purpose of this study was to investigate the mix design and performance of fiber-reinforced pervious concrete using lightweight coarse aggregates instead of ordinary coarse aggregates. There were two main stages in the relevant testing work. First, the properties of the matrix were tested with a rheological test and then different amounts of lightweight coarse aggregate and fine aggregate were added to the matrix to measure the properties of the obtained lightweight pervious concrete (LPC). In order to greatly reduce the experimental workload, the Taguchi experimental design method was adopted. An orthogonal array L9(34) was used, which was composed of four controllable three-level factors. There were four test parameters in this study, which were the lightweight coarse aggregate size, ordinary fine aggregate content, matrix type, and aggregate/binder ratio. The research results confirmed that the use of suitable materials and the optimal mix proportions were the key factors for improving the mechanical properties of the LPC. Due to the use of silica fume, ultrafine silica powder, and polypropylene fibers, the 28-day compressive strength, 28-day flexural strength, and 28-day split tensile strength of the LPC specimens prepared in this study were 4.80–7.78, 1.19–1.86, and 0.78–1.11 MPa, respectively. On the whole, the mechanical properties of the prepared LPC specimens were better than those of the LPC with general composition.

Basalt Fibers in Modified Whisker Reinforced Cementitious Composites

The calcium carbonate whisker (CW) and basalt fiber are gaining popularity due to its enhanced mechanical properties in composites. Also, the short and long fibers provide bridging role and resistance against cracking from micro- to macro-scale, respectively. The usage of long and short hybrid basalt fiber along with addition of CW in cement-based composites is still a research gap. In this work, experimental behavior of CW basalt hybrid fiber reinforced mortar is considered with various content and length (3 mm, 6 mm, 12 mm, and 20 mm) of hybrid basalt fibers. In addition to this, synergy performance index is determined to quantitatively evaluate the positive interaction of hybrid basalt fiber in cementitious materials. The strengthening effect of whiskers and basalt fibers are also studied using scanning electron microscopy. The CW with various basalt fiber contents having different length of hybrid basalt fiber is used. It was found that the four various length of hybrid basalt fiber together with CW in cement mortar exhibited enhanced compressive, flexural, and split tensile strength than that of pure mortar and single length basalt fiber reinforced cementitious mortar. The results of synergy performance index showed similar trend with the experimental results. The strengthening effect caused by step by step crack arresting mechanism was also observed in cementitious material.

Experimental Study on Self Compacting Fibrous Concrete Comprising Magnesium Sulphate Solution Treated Recycled Aggregates

It appears that the awareness and intentions to use recycled concrete aggregate (RCA) in concrete are expanding over the globe. The production of self-compacting concrete (SCC) using RCA is an emerging field in the construction sector. However, the highly porous and absorptive nature of adhered mortar on RCA’s surface leads to reduced concrete strength, which can be removed with the application of various techniques, such as acid treatment. This study investigated the effect of the partial replacement of silica fume by cement and natural aggregate (NA) by RCA with and without steel fibre. The used RCA was treated with magnesium sulphate solution. It was immersed in solutions with different concentrations of 10%, 15% and 20% and for different periods of 5, 10 and 15 days. Sixteen mixes were prepared, which were divided into six groups with or without 1% of steel fibre content. The fresh properties, compressive strength, split tensile strength and impact resistance were examined. The results revealed that the strengths of the mixes with 20% RCA were marginally better than those of the control mixes. The compressive strength and split tensile strength were reduced by 34% and 35% at 60% RCA content, respectively, as compared to the control mixes.

Karakteristik Beton Mutu 16,9 MPa Mengunakan 1% Kawat Bendrat dengan Variasi Panjang

The research aimed to determine the characteristics of the 16.9 MPa, using steel fibers (bendrat wire) with lenght variations in the concrete mixture 1% by volume-weight of the concrete. This research is an explanatory research with research questions are: how significant is the difference, and what are the characteristics. The total population of each treatment is 12 specimens with a sample of 5 specimens for compressive strength and 4 specimens for split tensile strength for each given treatment which is a random sample, specifically: A (reference concrete); B, C, D, and E for concrete with length variation an expressed as L/D fiber ratio of 50; 62.5; 75 and 87.5. The concrete material meets the standard. At the level of significance 0,05 indicates that the test data are normal distribution and uniform and the characteristics of concrete between reference concrete and concrete fiber different variance values. The unit weight between the reference concrete and the fiber concrete is slightly identical. The slump value decreases with increasing L/D fiber ratio. The concrete characteristics increase up to an L/D fiber ratio of 75. It generates a compressive strength of 19.47% of the design and 16.60% of the reference concrete (17,316 MPa). The split tensile strength is 2,753 MPa (22.29% higher than the design 2,251 MPa) and 18.83% of the reference concrete (2,317 MPa). The flexural strength was 3.638 MPa (18.01% of the 3.083 MPa design) and 1.97% of the reference concrete (3.144 MPa).

Experimental Studies on Strength Properties of M60 Concrete with Partial Replacement of Cement by GGBS and Fly Ash

Among all the current construction materials, concrete occupies a unique position. Concrete is the most often utilised building material. Cement production emits CO2, which is harmful to the environment. One of the most crucial ingredients in concrete production is cement. Experiments were carried out to see how different percentages of Fly Ash and GGBS affected the mechanical qualities of M60 grade concrete. After 7, 14, and 28 days of curing, the compressive strength of concrete cubes with suggested replacement was determined. Compressive strength, split tensile strength, and flexural strength are all evaluated on the cubes, cylinders, and prisms. The primary goal of this study is to compare the fresh and hardened characteristics of M-60 grade control concrete with concrete prepared with varied ratios of fly ash and GGBS Keywords: GGBS, Fly Ash, Durability, Compressive Strength, Tensile Strength, Flexural Strength, Slum cone Test

Effect of Admixtures on Concrete and Superplasticizers on Cementitious Material

Use of chemical and mineral admixtures have proved beneficial in improving quality, workability and have enhanced finish ability of concrete. They also help in maintaining the concrete during its important stages such as mixing, transporting, placing, curing and also in adverse weather conditions. Superplasticizers are super water reducers that allow 15-20% water reducion thereby increasing the workability without any change in the composition of mix.The reduction in water and cement reduces creep, shrinkage and heat of hydration. In this paper effect of different chemical and mineral admixture was studied along with sand to aggregate volume ratio ,cement content and water were analysed by preparing different concrete mixtures using water reducers and superplasticizers. A specimen of 200mm and 300mm was prepared and tested for compressive strength, split tensile strength and young's modulus. Slump test was also performed at 15 min interval. Also superplasticizers (TJ III , LIGNIN-SULPHONATE-based and NAPHTHALENE-SULPHONATE-based) were taken and their effect on the heat of hydration and induction period of cementitious material (portland cement) was studied. Keywords: admixture, workability, superplasticizer, water cement ratio, heat of hydration.

Effect of Kota Stone Slurry Powder in Fresh and Hardened Concrete: A Review

Concrete is highly used construction material with cement being its major ingredient. Also, the demand for good quality of concrete is increasing because of the fast-growing urbanization. But there are certain problems associated with the manufacturing of cement. One of the major problems being production of carbon dioxide causing pollution in environment, the manufacturing of cement is quite expensive and it also leads to the depletion of resources. In order to curtail the consumption of cement, it has become inevitable to replace cement by certain amount with substituent materials that are cheaper to produce in order to lower down the financial cost of concrete production by some extent. The review paper, elaborates many properties of concrete by the inclusion of Kota stone slurry after evaluating several research papers. The following paper discusses numerous properties of concrete including workability, compressive strength, split tensile strength, water absorption and modulus of elasticity. The paper demonstrates that when used appropriately, inclusion of Kota stone slurry in concrete had a positive impact on concrete by increasing the strength and durability.