scholarly journals Numerical Analysis of Transient Pressure Behaviors with Shale Gas MFHWs Interference

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 262 ◽  
Author(s):  
Dapeng Gao ◽  
Yuewu Liu ◽  
Daigang Wang ◽  
Guofeng Han
Keyword(s):  
Shale Gas ◽  
Large Scale ◽  
Horizontal Well ◽  
Gas Production ◽  
Pressure Recovery ◽  
Hydraulic Fractures ◽  
Transient Pressure ◽  
Gas Well ◽  
Well Pattern ◽  
The Impact

After the large-scale horizontal well pattern development in shale gas fields, the problem of fast pressure drop and gas well abandonment caused by well interference becomes more serious. It is urgent to understand the downhole transient pressure and flow characteristics of multi-stage fracturing horizontal well (MFHW) with interference. Therefore, the reservoir around the MFHW is divided into three regions: fracturing fracture, Stimulated reservoir volume (SRV), and unmodified matrix. Then, multi-region coupled flow model is established according to reservoir physical property and flow mechanism of each part. The model is numerically solved using the perpendicular bisection (PEBI) grids and the finite volume method. The accuracy of the model is verified by analyzing the measured pressure recovery data of one practical shale gas well and fitting the monitoring data of the later production pressure. Finally, this model is used to analyze the effects of factors, such as hydraulic fractures’ connectivity, well distance, the number of neighboring wells and well pattern arrangement, on the transient pressure and seepage characteristics of the well. The study shows that the pressure recovery double logarithmic curves fall in later part when the well is disturbed by a neighboring production well. The earlier and more severe the interference, the sooner the curve falls off and the larger the amplitude shows. If the well distance is closer, and if there are more neighboring wells and interconnected corresponding fracturing segments, the more severe interference appears among the wells. Moreover, the well interference may still exist even without interlinked fractures or SRV. Especially, severe interference will affect production when the hydraulic fractures are connected directly, and the interference is weaker when only SRV induced fracture network combined between wells, which is beneficial to production sometimes. When severe well interference occurs, periodic well shut-in is needed to help restore the reservoir pressure and output capacity. In the meanwhile, the daily output should be controlled reasonably to prolong the stable production time. This research will help to understand the impact of well interference to gas production, and to optimize the well spacing and achieve satisfied performance.

Key Factors in Shale Gas Modeling and Simulation

2014 ◽  
Vol 59 (4) ◽  
pp. 987-1004 ◽  
Author(s):  
Łukasz Klimkowski ◽  
Stanisław Nagy
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Production Performance ◽  
Hydraulic Fractures ◽  
Well Performance ◽  
Key Factors ◽  
Gas Well ◽  
Well Production ◽  
Multi Stage ◽  
The Impact

Abstract Multi-stage hydraulic fracturing is the method for unlocking shale gas resources and maximizing horizontal well performance. Modeling the effects of stimulation and fluid flow in a medium with extremely low permeability is significantly different from modeling conventional deposits. Due to the complexity of the subject, a significant number of parameters can affect the production performance. For a better understanding of the specifics of unconventional resources it is necessary to determine the effect of various parameters on the gas production process and identification of parameters of major importance. As a result, it may help in designing more effective way to provide gas resources from shale rocks. Within the framework of this study a sensitivity analysis of the numerical model of shale gas reservoir, built based on the latest solutions used in industrial reservoir simulators, was performed. The impact of different reservoir and hydraulic fractures parameters on a horizontal shale gas well production performance was assessed and key factors were determined.

scholarly journals Numerical Simulation Study on Seepage Theory of a Multi-Section Fractured Horizontal Well in Shale Gas Reservoirs Based on Multi-Scale Flow Mechanisms

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2329 ◽  
Author(s):  
Chao Tang ◽  
Xiaofan Chen ◽  
Zhimin Du ◽  
Ping Yue ◽  
Jiabao Wei
Keyword(s):  
Shale Gas ◽  
Large Scale ◽  
Gas Diffusion ◽  
Gas Production ◽  
Hydraulic Fractures ◽  
Klinkenberg Effect ◽  
Stimulated Reservoir Volume ◽  
Multi Scale ◽  
Reservoir Volume ◽  
Flow Mechanisms

Aimed at the multi-scale fractures for stimulated reservoir volume (SRV)-fractured horizontal wells in shale gas reservoirs, a mathematical model of unsteady seepage is established, which considers the characteristics of a dual media of matrix and natural fractures as well as flow in the large-scale hydraulic fractures, based on a discrete-fracture model. Multi-scale flow mechanisms, such as gas desorption, the Klinkenberg effect, and gas diffusion are taken into consideration. A three-dimensional numerical model based on the finite volume method is established, which includes the construction of spatial discretization, calculation of average pressure gradient, and variable at interface, etc. Some related processing techniques, such as boundedness processing upstream and downstream of grid flow, was used to limit non-physical oscillation at large-scale hydraulic fracture interfaces. The sequential solution is performed to solve the pressure equations of matrix, natural, and large-scale hydraulic fractures. The production dynamics and pressure distribution of a multi-section fractured horizontal well in a shale gas reservoir are calculated. Results indicate that, with the increase of the Langmuir volume, the average formation pressure decreases at a slow rate. Simultaneously, the initial gas production and the contribution ratio of the desorbed gas increase. With the decrease of the pore size of the matrix, gas diffusion and the Klinkenberg effect have a greater impact on shale gas production. By changing the fracture half-length and the number of fractured sections, we observe that the production process can not only pursue the long fractures or increase the number of fractured sections, but also should optimize the parameters such as the perforation position, cluster spacing, and fracturing sequence. The stimulated reservoir volume can effectively control the shale reservoir.

scholarly journals Ensemble-based optimization of hydraulically fractured horizontal well placement in shale gas reservoir through Hough transform parameterization

2021 ◽  
Author(s):  
Liang Xue ◽  
Shao-Hua Gu ◽  
Xie-Er Jiang ◽  
Yue-Tian Liu ◽  
Chen Yang
Keyword(s):  
Simulation Model ◽  
Shale Gas ◽  
Horizontal Well ◽  
Gas Production ◽  
Design Parameters ◽  
Hydraulic Fractures ◽  
Gas Reservoir ◽  
Well Drilling ◽  
Shale Gas Reservoir ◽  
Fractured Horizontal Well

AbstractShale gas reservoirs have been successfully developed due to the advancement of the horizontal well drilling and multistage hydraulic fracturing techniques. However, the optimization design of the horizontal well drilling, hydraulic fracturing, and operational schedule is a challenging problem. An ensemble-based optimization method (EnOpt) is proposed here to optimize the design of the hydraulically fractured horizontal well in the shale gas reservoir. The objective is to maximize the net present value (NPV) which requires a simulation model to predict the cumulative shale gas production. To accurately describe the geometry of the hydraulic fractures, the embedded discrete fracture modeling method (EDFM) is used to construct the shale gas simulation model. The effects of gas absorption, Knudsen diffusion, natural and hydraulic fractures, and gas–water two phase flow are considered in the shale gas production system. To improve the parameter continuity and Gaussianity required by the EnOpt method, the Hough transformation parameterization is used to characterize the horizontal well. The results show that the proposed method can effectively optimize the design parameters of the hydraulically fractured horizontal well, and the NPV can be improved greatly after optimization so that the design parameters can approach to their optimal values.

Economic benefit of shale gas exploitation based on back propagation neural network

2020 ◽  
Vol 39 (6) ◽  
pp. 8823-8830
Author(s):  
Jiafeng Li ◽  
Hui Hu ◽  
Xiang Li ◽  
Qian Jin ◽  
Tianhao Huang
Keyword(s):  
Neural Network ◽  
Shale Gas ◽  
Bp Neural Network ◽  
Large Scale ◽  
Linear Prediction ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Economic Benefits ◽  
Gas Well ◽  
Well Production

Under the influence of COVID-19, the economic benefits of shale gas development are greatly affected. With the large-scale development and utilization of shale gas in China, it is increasingly important to assess the economic impact of shale gas development. Therefore, this paper proposes a method for predicting the production of shale gas reservoirs, and uses back propagation (BP) neural network to nonlinearly fit reservoir reconstruction data to obtain shale gas well production forecasting models. Experiments show that compared with the traditional BP neural network, the proposed method can effectively improve the accuracy and stability of the prediction. There is a nonlinear correlation between reservoir reconstruction data and gas well production, which does not apply to traditional linear prediction methods

scholarly journals Investigation of the Main Factors During Shale-gas Production Using Grey Relational Analysis

2016 ◽  
Vol 9 (1) ◽  
pp. 207-215 ◽  
Author(s):  
Hongling Zhang ◽  
Jing Wang ◽  
Haiyong Zhang
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Fracture Conductivity ◽  
Matrix Permeability ◽  
Shale Gas Reservoirs ◽  
Main Factors ◽  
Grey Relational ◽  
The Impact ◽  
Half Length

Shale gas is one of the primary types of unconventional reservoirs to be exploited in search for long-lasting resources. Production from shale gas reservoirs requires horizontal drilling with hydraulic fracturing to achieve the most economic production. However, plenty of parameters (e.g., fracture conductivity, fracture spacing, half-length, matrix permeability, and porosity,etc) have high uncertainty that may cause unexpected high cost. Therefore, to develop an efficient and practical method for quantifying uncertainty and optimizing shale-gas production is highly desirable. This paper focuses on analyzing the main factors during gas production, including petro-physical parameters, hydraulic fracture parameters, and work conditions on shale-gas production performances. Firstly, numerous key parameters of shale-gas production from the fourteen best-known shale gas reservoirs in the United States are selected through the correlation analysis. Secondly, a grey relational grade method is used to quantitatively estimate the potential of developing target shale gas reservoirs as well as the impact ranking of these factors. Analyses on production data of many shale-gas reservoirs indicate that the recovery efficiencies are highly correlated with the major parameters predicted by the new method. Among all main factors, the impact ranking of major factors, from more important to less important, is matrix permeability, fracture conductivity, fracture density of hydraulic fracturing, reservoir pressure, total organic content (TOC), fracture half-length, adsorbed gas, reservoir thickness, reservoir depth, and clay content. This work can provide significant insights into quantifying the evaluation of the development potential of shale gas reservoirs, the influence degree of main factors, and optimization of shale gas production.

scholarly journals Effects of Formation Dip on Gas Production from Unconfined Marine Hydrate-Bearing Sediments through Depressurization

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Yilong Yuan ◽  
Tianfu Xu ◽  
Yingli Xia ◽  
Xin Xin
Keyword(s):  
Large Scale ◽  
Horizontal Well ◽  
Field Measurements ◽  
Production Method ◽  
Geological Structure ◽  
Horizontal Distribution ◽  
Gas Production ◽  
Well Completion ◽  
Hydrate Reservoir ◽  
Hydrate Bearing Sediments

The effects of geologic conditions and production methods on gas production from hydrate-bearing sediments (HBS) have been widely investigated. The reservoir was usually treated as horizontal distribution, whereas the sloping reservoir was not considered. In fact, most strata have gradients because of the effects of geological structure and diagenesis. In this study, based on currently available geological data from field measurements in Shenhu area of the South China Sea, the effects of formation dip on gas production were investigated through depressurization using a horizontal well. The modeling results indicate that the strategy of horizontal well is an effective production method from the unconfined Class 2 HBS. The predicted cumulative volume of methane produced at the 1000 m horizontal well was 4.51 × 107 ST m3 over 5-year period. The hydrate dissociation behavior of sloping formation is sensitive to changes in the reservoir pressure. As in unconfined marine hydrate reservoir, the sloping formation is not conducive to free methane gas recovery, which results in more dissolved methane produced at the horizontal well. The obvious issue for this challenging target is relatively low exploitation efficiency of methane because of the recovery of very large volumes of water. Consequently, the development of the favorable well completion method to prevent water production is significantly important for realizing large scale hydrate exploitation in the future.

Shale-gas well in Marcellus Shale with bi-wing hydraulic fractures

2021 ◽  
pp. 89-103
Author(s):  
Sutthaporn Tripoppoom ◽  
Wei Yu ◽  
Kamy Sepehrnoori ◽  
Jijun Miao
Keyword(s):  
Shale Gas ◽  
Marcellus Shale ◽  
Hydraulic Fractures ◽  
Gas Well

scholarly journals Numerical Simulation of Shale Gas Multiscale Seepage Mechanism-Coupled Stress Sensitivity

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Xun Yan ◽  
Jing Sun ◽  
Dehua Liu
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Gas Transport ◽  
Sensitivity Coefficient ◽  
Stress Sensitivity ◽  
Gas Production ◽  
Molecular Flow ◽  
Adsorption Phenomenon ◽  
Gas Seepage ◽  
The Impact

The complexity of the gas transport mechanism in microfractures and nanopores is caused by the feature of multiscale and multiphysics. Figuring out the flow mechanism is of great significance for the efficient development of shale gas. In this paper, an apparent permeability model which covers continue, slip, transition, and molecular flow and geomechanical effect was presented. Additionally, a mathematical model comprising multiscale, geomechanics, and adsorption phenomenon was proposed to characterize gas flow in the shale reservoir. The aim of this paper is to investigate some important impacts in the process of gas transportation, which includes the shale stress sensitivity, adsorption phenomenon, and reservoir porosity. The results reveal that the performance of the multistage fractured horizontal well is strongly influenced by stress sensitivity coefficient. The cumulative gas production will decrease sharply when the shale gas reservoir stress sensitivity coefficient increases. In addition, the adsorption phenomenon has an influence on shale gas seepage and sorption capacity; however, the effect of adsorption is very weak in the early gas transport period, and the impact of later will increase. Moreover, shale porosity also greatly affects the shale gas transportation.

scholarly journals Analysis of hydraulic fracture behavior and well pattern optimization in anisotropic coal reservoirs

2020 ◽  
pp. 014459872096083
Author(s):  
Yulong Liu ◽  
Dazhen Tang ◽  
Hao Xu ◽  
Wei Hou ◽  
Xia Yan
Keyword(s):  
Hydraulic Fracture ◽  
Coalbed Methane ◽  
Fracture Network ◽  
Simulation Software ◽  
Natural Fracture ◽  
Hydraulic Fractures ◽  
Natural Fractures ◽  
Well Pattern ◽  
Well Pattern Optimization ◽  
The Impact

Macrolithotypes control the pore-fracture distribution heterogeneity in coal, which impacts stimulation via hydrofracturing and coalbed methane (CBM) production in the reservoir. Here, the hydraulic fracture was evaluated using the microseismic signal behavior for each macrolithotype with microfracture imaging technology, and the impact of the macrolithotype on hydraulic fracture initiation and propagation was investigated systematically. The result showed that the propagation types of hydraulic fractures are controlled by the macrolithotype. Due to the well-developed natural fracture network, the fracture in the bright coal is more likely to form the “complex fracture network”, and the “simple” case often happens in the dull coal. The hydraulic fracture differences are likely to impact the permeability pathways and the well productivity appears to vary when developing different coal macrolithtypes. Thus, considering the difference of hydraulic fracture and permeability, the CBM productivity characteristics controlled by coal petrology were simulated by numerical simulation software, and the rationality of well pattern optimization factors for each coal macrolithotype was demonstrated. The results showed the square well pattern is more suitable for dull coal and semi-dull coal with undeveloped natural fractures, while diamond and rectangular well pattern is more suitable for semi-bright coal and bright coal with more developed natural fractures and more complex fracturing fracture network; the optimum wells spacing of bright coal and semi-bright coal is 300 m and 250 m, while that of semi-dull coal and dull coal is just 200 m.

Sign in / Sign up

Export Citation Format

Share Document