scholarly journals A 3D-Printed Hybrid Water Antenna with Tunable Frequency and Beamwidth

Electronics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 230 ◽  
Author(s):  
Zeng-Pei Zhong ◽  
Jia-Jun Liang ◽  
Guan-Long Huang ◽  
Tao Yuan
Keyword(s):  
Beam Steering ◽  
Ground Plane ◽  
Fixed Direction ◽  
Gain Variation ◽  
Measurement Results ◽  
Feeding Structure ◽  
Operating Bandwidth ◽  
3D Printed ◽  
Metallic Strip ◽  
Tunable Frequency

A novel hybrid water antenna with tunable frequency and beamwidth is proposed. An L-shaped metallic strip is adopted as the feeding structure of the antenna in order to effectively broaden the operating bandwidth. The L-shaped strip feeder and a rectangular water dielectric resonator constitute the driven element. Five identical rectangular water dielectric elements are mounted linearly with respect to the driven element, which act as the directors and contribute to narrow the beamwidth. By varying the height of the liquid water level in the driven element, the proposed antenna is able to tune to different operational frequencies. Furthermore, it is also able to adjust to different beamwidths and gains via varying the number of director elements. A prototype is fabricated by using 3-D printing technology, where the main parts of the antenna are printed with photopolymer resin, and then the ground plane and L-shaped strip feeder are realized by using adhesive copper tapes. Measurement results agree well the simulation ones. A tunable frequency ranging from 4.66 GHz to 5.65 GHz is obtained and a beam steering along a fixed direction with a gain variation less than 0.5 dB is realized.

scholarly journals A High-Isolation Dual-Polarization Substrate-Integrated Fabry-Pérot Cavity Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Chang Chen ◽  
Bo-Liang Liu ◽  
Ling Ji ◽  
Wei-Dong Chen
Keyword(s):  
Near Field ◽  
Ground Plane ◽  
Cross Polarization ◽  
Dual Polarization ◽  
High Isolation ◽  
Fabry Perot ◽  
Feeding Structure ◽  
Operating Bandwidth ◽  
High Degree ◽  
Polarization Level

A dual-polarization substrate-integrated Fabry-Pérot cavity (SI-FPC) antenna is presented in this paper. The patch embedded in SI-FPC is excited with a near-field coupled feeding structure for V-polarization and with a slot-coupled feeding structure for H-polarization. The feeding structures are separated by a ground plane to improve the isolation between the ports. As a design example, an antenna operating at 10.0 GHz is fabricated and measured. A high degree of port isolation (<−40 dB) over the whole operating bandwidth (9.5–10.2 GHz) and good cross-polarization level (>25 dB) can be achieved.

One-dimensional beam-steering Fabry–Perot cavity (FPC) antenna with a reconfigurable superstrate

2019 ◽  
Vol 12 (3) ◽  
pp. 233-239
Author(s):  
Lu-Yang Ji ◽  
Shuai Fu ◽  
Lin-Xi Zhang ◽  
Jian-Ying Li
Keyword(s):  
Patch Antenna ◽  
Beam Steering ◽  
Ground Plane ◽  
Steering Angle ◽  
One Dimensional ◽  
Active Elements ◽  
Gain Variation ◽  
Fabry Perot ◽  
Unit Cells ◽  
Good Agreement

AbstractIn this work, a new reconfigurable discrete 1D beam-steering Fabry–Perot cavity antenna with enhanced radiation performance is presented. It consists of a probe-fed patch antenna printed on the ground plane and a reconfigurable metasurface acting as the upper partially reflective surface to realize beam steering. By utilizing 6 × 6 proposed reconfigurable unit cells on the superstrate, the beam-steering angle can be effectively enhanced from ±7° to ±17° with fewer active elements and a much simpler biasing network. The proposed antenna was fabricated to validate the feasibility. Good agreement between the simulated and measured results is achieved. Moreover, the measured realized gains are over 11 dBi with a gain variation from the boresight direction to the tilted direction <0.2 dBi.

Design of a compact UWB antenna with a partial ground plane on epoxy woven glass material

2017 ◽  
Vol 24 (1) ◽  
pp. 73-79
Author(s):  
Md. Moinul Islam ◽  
Mohammad Tariqul Islam ◽  
Mohammad Rashed Iqbal Faruque ◽  
Rabah W. Aldhaheri ◽  
Md. Samsuzzaman
Keyword(s):  
Dielectric Material ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Design Parameters ◽  
Uwb Antenna ◽  
Glass Material ◽  
Measurement Results ◽  
Good Term ◽  
Parametric Analyses ◽  
Uwb Applications

AbstractA compact ultra-wideband (UWB) antenna is presented in this paper with a partial ground plane on epoxy woven glass material. The study is discussed to comprehend the effects of various design parameters with explicit parametric analyses. The overall antenna dimension is 0.22×0.26×0.016 λ. A prototype is made on epoxide woven glass fabric dielectric material of 1.6 mm thickness. The measured results point out that the reported antenna belongs to a wide bandwidth comprehending from 3 GHz to more than 11 GHz with VSWR<2. It has a peak gain of 5.52 dBi, where 3.98 dBi is the average gain. Nearly omnidirectional radiation patterns are observed within the operating frequency bands. A good term exists between simulation and measurement results, which lead the reported antenna to be an appropriate candidate for UWB applications.

scholarly journals 3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity

2017 ◽  
Vol 2017 ◽  
pp. 1-5 ◽  
Author(s):  
Han He ◽  
Mitra Akbari ◽  
Lauri Sydänheimo ◽  
Leena Ukkonen ◽  
Johanna Virkki
Keyword(s):  
Rfid Tags ◽  
High Humidity ◽  
Direct Write ◽  
Uhf Rfid ◽  
Printed Antenna ◽  
Passive Uhf Rfid ◽  
Measurement Results ◽  
One Step ◽  
3D Printed ◽  
Wireless Measurement

We present the possibilities of 3D direct-write dispensing in the fabrication of passive UHF RFID graphene tags on a textile substrate. In our method, the graphene tag antenna is deposited directly on top of the IC strap, in order to simplify the manufacturing process by removing one step, that is, the IC attachment with conductive glue. Our wireless measurement results confirm that graphene RFID tags with printed antenna-IC interconnections achieve peak read ranges of 5.2 meters, which makes them comparable to graphene tags with epoxy-glued ICs. After keeping the tags in high humidity, the read ranges of the tags with epoxy-glued and printed antenna-IC interconnections decrease 0.8 meters and 0.5 meters, respectively. However, after drying, the performance of both types of tags returns back to normal.

Low-profile U-shaped DRA for ultra-wideband applications

2016 ◽  
Vol 9 (3) ◽  
pp. 621-627 ◽  
Author(s):  
Idris Messaoudene ◽  
Tayeb A. Denidni ◽  
Abdelmadjid Benghalia
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Radiation Patterns ◽  
Wide Bandwidth ◽  
Operating Band ◽  
Low Profile ◽  
Measurement Results

In this paper, a microstrip-fed U-shaped dielectric resonator antenna (DRA) is simulated, designed, and fabricated. This antenna, in its simple configuration, operates from 5.45 to 10.8 GHz. To enhance its impedance bandwidth, the ground plane is first modified, which leads to an extended bandwidth from 4 to 10.8 GHz. Then by inserting a rectangular metallic patch inside the U-shaped DRA, the bandwidth is increased more to achieve an operating band from 2.65 to 10.9 GHz. To validate these results, an experimental antenna prototype is fabricated and measured. The obtained measurement results show that the proposed antenna can provide an ultra-wide bandwidth and a symmetric bidirectional radiation patterns. With these features, the proposed antenna is suitable for ultra-wideband applications.

scholarly journals 4 × 4 MIMO Antenna System for Smart Eyewear in Wi-Fi 5G and Wi-Fi 6e Wireless Communication Applications

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2936
Author(s):  
Ming-An Chung ◽  
Cheng-Wei Hsiao ◽  
Chih-Wei Yang ◽  
Bing-Ruei Chuang
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Slot Antenna ◽  
Actual Measurement ◽  
Antenna Efficiency ◽  
Mimo Antenna ◽  
Measurement Results ◽  
Working Frequency ◽  
Peak Gain

This paper proposes a small-slot antenna system (50 mm × 9 mm × 2.7 mm) for 4 × 4 multiple-input multiple-output (MIMO) on smart glasses devices. The antenna is set on the plastic temple, and the inverted F antenna radiates through the slot in the ground plane of the sputtered copper layer outside the temple. Two symmetrical antennas and slots on the same temple and series capacitive elements enhance the isolation between the two antenna ports. When both temples are equipped with the proposed antennas, 4 × 4 MIMO transmission can be achieved. The antenna substrate is made of polycarbonate (PC), and its thickness is 2.7 mm εr=2.85, tanδ=0.0092. According to the actual measurement results, this antenna has two working frequency bands when the reflection coefficient is lower than −10dB, its working frequency bandwidth at 4.58–5.72 GHz and 6.38–7.0 GHz. The proposed antenna has a peak gain of 4.3 dBi and antenna efficiency of 85.69% at 5.14 GHz. In addition, it also can obtain a peak gain of 3.3 dBi and antenna efficiency of 82.78% at 6.8 GHz. The measurement results show that this antenna has good performance, allowing future smart eyewear devices to be applied to Wi-Fi 5G (5.18–5.85 GHz) and Wi-Fi 6e (5.925–7.125 GHz).

Error sources and models of the laser tracker without a beam steering mirror

2021 ◽  
Author(s):  
Radoslav Choleva ◽  
Alojz Kopáčik
Keyword(s):  
Measurement Accuracy ◽  
Beam Steering ◽  
Systematic Errors ◽  
Error Modeling ◽  
Laser Tracker ◽  
High Demand ◽  
Error Sources ◽  
Error Models ◽  
Measurement Results

AbstractThe laser tracker is a widely used instrument in many industrial and metrological applications with high demand measurement accuracy. Imperfections in construction and misalignment of individual parts deliver systematic errors in the measurement results. All error sources need to be identified and reduced to the minimum to achieve the best possible accuracy. The paper summarizes error sources of the laser tracker without beam steering mirror with emphasis on error modeling. Descriptions of error models are provided for the static and kinematic type of measurement.

scholarly journals An Efficient Full-Wave Electromagnetic Analysis for Capacitive Body-Coupled Communication

2015 ◽  
Vol 2015 ◽  
pp. 1-15 ◽  
Author(s):  
Muhammad Irfan Kazim ◽  
Muhammad Imran Kazim ◽  
J. Jacob Wikner
Keyword(s):  
Human Body ◽  
Ground Plane ◽  
Propagation Loss ◽  
Communication Link ◽  
Simulation Approach ◽  
Full Wave ◽  
The Earth ◽  
Measurement Results ◽  
Link Budget ◽  
Physiological Variations

Measured propagation loss for capacitive body-coupled communication (BCC) channel (1 MHz to 60 MHz) is limitedly available in the literature for distances longer than 50 cm. This is either because of experimental complexity to isolate the earth-ground or design complexity in realizing a reliable communication link to assess the performance limitations of capacitive BCC channel. Therefore, an alternate efficient full-wave electromagnetic (EM) simulation approach is presented to realistically analyze capacitive BCC, that is, the interaction of capacitive coupler, the human body, and the environment all together. The presented simulation approach is first evaluated for numerical/human body variation uncertainties and then validated with measurement results from literature, followed by the analysis of capacitive BCC channel for twenty different scenarios. The simulation results show that the vertical coupler configuration is less susceptible to physiological variations of underlying tissues compared to the horizontal coupler configuration. The propagation loss is less for arm positions when they are not touching the torso region irrespective of the communication distance. The propagation loss has also been explained for complex scenarios formed by the ground-plane and the material structures (metals or dielectrics) with the human body. The estimated propagation loss has been used to investigate the link-budget requirement for designing capacitive BCC system in CMOS sub-micron technologies.

Sign in / Sign up

Export Citation Format

Share Document