RPAS Automatic ADS-B Based Separation Assurance and Collision Avoidance System Real-Time Simulation Results

Remotely piloted aircraft systems (RPAS) are increasingly becoming relevant actors that are flying through the airspace and will gain much more importance in the future. In order to allow for their safe integration with manned conventional traffic in non-segregated airspaces, in accordance with the overall air traffic management (ATM) paradigm, specific enabling technologies are needed. As is well known, the detect and avoid (DAA) technology is fundamental among the enabling technologies identified as crucial for RPAS integration into the overall ATM system. In the meantime, to support extended surveillance, the universal introduction of cooperative automatic dependent surveillance-broadcast (ADS-B) on-board aircraft is being increasingly implemented because it has the potential to allow for the coverage of the entire airspaces in remote areas not usually covered by conventional radar surveillance. In this paper, experimental results that were obtained through the real-time validation, with hardware and human in the loop (RTS-HIL) simulations, of an automatic ADS-B based separation assurance and collision avoidance system aimed to support RPAS automatic operations (as well as remote pilot decision making) are presented and discussed. In the paper, after an introductory outline of the concept of operations (ConOps) of the system and its architectural organization, in addition to basic information about the main system functionalities, a description of the tests that were carried out is reported, and the obtained results are described and discussed in order to emphasize the performance and limitations of the proposed system. In particular, the obtained quantitative performances are reported and commented on, and the feedback presented by pilots in order to improve the system, e.g., in terms of preferred typology of conflict resolution maneuver elaborated by the system, is described.