scholarly journals Structure and Photocatalytic Activity of PdCrOx Cocatalyst on SrTiO3 for Overall Water Splitting

Catalysts ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 59 ◽  
Author(s):  
Tomoki Kanazawa ◽  
Shunsuke Nozawa ◽  
Daling Lu ◽  
Kazuhiko Maeda
Keyword(s):  
Fine Structure ◽  
Water Splitting ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Irradiation Time ◽  
X Ray ◽  
Overall Water Splitting ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
X Ray Absorption

The mechanism of PdCrOx multi-component cocatalyst formation on SrTiO3 was investigated using transmission electron microscopy, X-ray absorption fine structure spectroscopy and X-ray photoelectron spectroscopy. The PdCrOx/SrTiO3 samples were synthesized by a photodeposition method under UV light irradiation (λ > 300 nm) for various time periods (0–5 h). The fine structure and valence state of the Pd species of PdCrOx nanoparticles were varied from Pd oxide to a mixture of metallic Pd and oxidized Pd species with an increase in the irradiation time. The overall water-splitting activity of PdCrOx was strongly dependent on the photoirradiation time during deposition. Although longer photoirradiation time during preparation did not influence the H2 evolution activity of PdCrOx/SrTiO3 from aqueous methanol solution, it was effective in suppressing the O2 photoreduction activity, which is one of the backward reactions during overall water splitting.

scholarly journals Ni2P/rGO/NF Nanosheets As a Bifunctional High-Performance Electrocatalyst for Water Splitting

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 744 ◽  
Author(s):  
Jinyu Huang ◽  
Feifei Li ◽  
Baozhong Liu ◽  
Peng Zhang
Keyword(s):  
Electron Microscopy ◽  
Water Splitting ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
High Efficiency ◽  
Splitting Method ◽  
Bifunctional Catalyst ◽  
Strong Activity ◽  
X Ray ◽  
Transmission Electron

The hydrogen generated via the water splitting method is restricted by the high level of theoretical potential exhibited by the anode. The work focuses on synthesizing a bifunctional catalyst with a high efficiency, that is, a nickel phosphide doped with the reduced graphene oxide nanosheets supported on the Ni foam (Ni2P/rGO/NF), via the hydrothermal approach together with the calcination approach specific to the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). The Raman, X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscope (TEM), Scanning Electron Microscopy (SEM), High-Resolution Transmission Electron Microscopy (HRTEM), as well as elemental mapping, are adopted to study the composition and morphology possessed by Ni2P/rGO/NF. The electrochemical testing is performed by constructing a parallel two-electrode electrolyzer (Ni2P/rGO/NF||Ni2P/rGO/NF). Ni2P/rGO/NF||Ni2P/rGO/NF needs a voltage of only 1.676 V for driving 10 mA/cm2, which is extremely close to Pt/C/NF||IrO2/NF (1.502 V). It is possible to maintain the current density for no less than 30 hours. It can be demonstrated that Ni2P/rGO/NF||Ni2P/rGO/NF has commercial feasibility, relying on the strong activity and high stability.

Preparation and Characterization of CdSe Nanoparticles Synthesized Using the Ultrasonic Irradiation

2007 ◽  
Vol 124-126 ◽  
pp. 1229-1232 ◽  
Author(s):  
Myoung Seok Sung ◽  
Yoon Bok Lee ◽  
Yong Jin Kim ◽  
Yang Do Kim
Keyword(s):  
Ultrasonic Irradiation ◽  
Photoelectron Spectroscopy ◽  
Irradiation Time ◽  
Xrd Analysis ◽  
Cdse Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Emission ◽  
Transmission Electron ◽  
Average Size

Cadmium selenide(CdSe) nanoparticles were prepared in the aqueous solution containing isopropyl alcohol by the ultrasonic irradiation at room temperature. The cadmium chloride (CdCl2) and sodium selenosulfate (Na2SeSO3) were used as the cadmium and selenium source, respectively. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), UV-Vis absorption spectra and PL spectra were used to characterize the CdSe nanoparticles. XRD analysis revealed the formation of cubic structure CdSe. TEM images showed aggregated CdSe nanoparticles with the size of nanometer scale. Average size of CdSe nanoparticles were about 3.9, 5.0 and 5.1nm with sonication time of 6, 30 and 40 minutes, respectively. The surface emission became less intensive and shifted to red with increasing irradiation time. This paper presents the effects of ultrasonic on the formation of CdSe nanoparticles and its characteristics.

scholarly journals The nature and effects of rhodium and antimony dopants on the electronic structure of TiO2: towards design of Z-scheme photocatalysts

2016 ◽  
Vol 4 (18) ◽  
pp. 6946-6954 ◽  
Author(s):  
E. N. K. Glover ◽  
S. G. Ellington ◽  
G. Sankar ◽  
R. G. Palgrave
Keyword(s):  
Fine Structure ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Edge Structure ◽  
X Ray ◽  
Antimony Doping ◽  
X Ray Absorption

The nature and effects of rhodium and antimony doping in TiO2 have been investigated using X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Extended X-ray Absorption Fine Structure (EXAFS), X-ray Absorption Near Edge Structure (XANES) and diffuse reflectance spectroscopy.

Solvothermal Synthesis of Novel 3D Peony-Like TiO2 Microstructures and its Enhanced Photocatalytic Activity

NANO ◽  
2018 ◽  
Vol 13 (05) ◽  
pp. 1850056 ◽  
Author(s):  
Yugan He ◽  
Qi Yan ◽  
Xiaoyu Chang ◽  
Meiying Zhu ◽  
Weiwei Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Reaction Time ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Reaction Parameters ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Irradiation Power ◽  
Degussa P25

A TiO2 photocatalyst with peony-like microstructures and a large percentage of exposed {001} facets was synthesized using a facile solvethermal method. The peony-like TiO2 was obtained using HF as a capping agent, TiCl4 as the precursor and ethanol as the solvothermal agent. The parameters which influence the mophology and formation mechanism of the products including the HF concentration, the reaction time and temperature and the solvothermal solvent, were investigated. The samples were characterized using field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption analysis. As the reaction time or reaction temperature increased, the morphology TiO2 changed from hexagonally assembled microspheres to peony-like microflowers which were composed of stacks of ultrathin nanosheets. The other reaction parameters also play a crucial role in the formation of the TiO2 microstuctures. Photocatalytic experiments showed that the synthesized TiO2 outperformed Degussa P25 in the photodegradation of methelene blue under a very weak UV light irradiation (power: 8[Formula: see text]W, light intensity: 0.4[Formula: see text]mW[Formula: see text]cm[Formula: see text]).

Sign in / Sign up

Export Citation Format

Share Document