scholarly journals Subtle Application of Electrical Field-Induced Lossy Mode Resonance to Enhance Performance of Optical Planar Waveguide Biosensor

Biosensors ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 86
Author(s):  
Yu-Cheng Lin ◽  
Liang-Yü Chen
Keyword(s):  
Surface Modification ◽  
Optical Fiber ◽  
Serum Albumin ◽  
Applied Voltage ◽  
Mass Production ◽  
Planar Waveguide ◽  
Wavelength Shift ◽  
Metallic Oxide ◽  
Electrical Field ◽  
Optical Planar Waveguide

Many studies concern the generation of lossy mode resonances (LMRs) using metallic oxide thin films that are deposited on optical fiber. However, the LMR-based optical fiber sensors are frangible, do not allow easy surface modification, and are not suited to mass production. This study proposes an electrical field-induced LMR-based biosensor with an optical planar waveguide to replace surface modification and allow the mass production of protein biosensors and accelerate the speed of the analyte to decrease the detection time. Experimentally, the biosensor is evaluated using charged serum albumin molecules and characterized in terms of the LMR wavelength shift using an externally applied voltage for different durations. The externally applied voltage generates a significant electric field, which drives the non-neutralized biomolecules and increases the LMR wavelength shift. Our experimental results demonstrate that there are two different mechanisms of adsorption of serum albumin molecules for short-term and long-term observations. These are used to calculate the sensitivity of the biosensor. This electrical field-induced method is highly significant for the development and fabrication of LMR-based biosensors.

scholarly journals Development of a Temperature-Controlled Optical Planar Waveguide Sensor with Lossy Mode Resonance for Refractive Index Measurement

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 199
Author(s):  
Yu-Cheng Lin ◽  
Liang-Yü Chen
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Temperature Control ◽  
Planar Waveguide ◽  
Metallic Oxide ◽  
Refractive Index Measurement ◽  
Index Measurement ◽  
Temperature Controlled ◽  
Optical Planar Waveguide ◽  
Active Temperature

The generation of lossy mode resonances (LMR) with a metallic oxide film deposited on an optical fiber has attracted the attention of many applications. However, an LMR-based optical fiber sensor is frangible, and therefore it does not allow control of the temperature and is not suited to mass production. This paper aims to develop a temperature-controlled lossy mode resonance (TC-LMR) sensor on an optical planar waveguide with an active temperature control function in which an ITO film is not only used as the LMR resonance but also to provide the heating function to achieve the benefits of compact size and active temperature control. A simple flat model about the heat transfer mechanism is proposed to determine the heating time constant for the applied voltages. The TC-LMR sensor is evaluated experimentally for refractive index measurement using a glycerol solution. The heating temperature functions relative to the controlled voltages for water and glycerol are obtained to verify the performance of the TC-LMR sensor. The TC-LMR sensor is a valuable sensing device that can be used in clinical testing and point of care for programming heating with precise temperature control.

scholarly journals Whispering Gallery Mode Based Optical Fiber Sensor for Measuring Concentration of Salt Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Chia-Chin Chiang ◽  
Jian-Cin Chao
Keyword(s):  
Optical Fiber ◽  
Mass Production ◽  
Low Cost ◽  
Optical Fiber Sensor ◽  
Whispering Gallery Mode ◽  
Solution Concentration ◽  
Fiber Sensor ◽  
Average Sensitivity ◽  
Whispering Gallery ◽  
The Right

An optical fiber solution-concentration sensor based on whispering gallery mode (WGM) is proposed in this paper. The WGM solution-concentration sensors were used to measure salt solutions, in which the concentrations ranged from 1% to 25% and the wavelength drifted from the left to the right. The experimental results showed an average sensitivity of approximately 0.372 nm/% and anR2linearity of 0.8835. The proposed WGM sensors are of low cost, feasible for mass production, and durable for solution-concentration sensing.

Simulation of Local Surface Modification in STM by ab initio Quantum Chemistry

1998 ◽  
Vol 05 (02) ◽  
pp. 493-499 ◽  
Author(s):  
V. S. Gurin
Keyword(s):  
Surface Modification ◽  
Ab Initio ◽  
Physical Nature ◽  
Atomic Scale ◽  
Level Shift ◽  
Electrical Field ◽  
High Electrical Field ◽  
Wide Range ◽  
Energy Level Shift ◽  
Ab Initio Approach

Surface modification by means of STM has became a well-known method for the artificial formation of nanometer and atomic scale structures. The physical nature of surface modification can consist in a wide range of phenomena (from mechanical indentation up to specific tip-induced chemistry). The high electrical field at the STM tip is considered to be the main feature of STM modification experiments. The field strength is comparable with intramolecular ones and can influence the chemical bonding in surface structures. The model of STM-stimulated modification is considered using the quantum-chemical ab initio approach for a surface cluster in the high electrical field. The destabilization effect, energy level shift, and bond polarization under the STM tip field occur and can show the atomistic nature of surface transformations in STM.

scholarly journals Surface modification of PLGA nanoparticles via human serum albumin conjugation for controlled delivery of docetaxel

2013 ◽  
Vol 21 (1) ◽  
Author(s):  
Saeed Manoochehri ◽  
Behrad Darvishi ◽  
Golnaz Kamalinia ◽  
Mohsen Amini ◽  
Mahdieh Fallah ◽  
...  
Keyword(s):  
Surface Modification ◽  
Human Serum Albumin ◽  
Serum Albumin ◽  
Human Serum ◽  
Plga Nanoparticles ◽  
Controlled Delivery

scholarly journals Optical planar waveguide for cell counting

2012 ◽  
Vol 100 (4) ◽  
pp. 043701 ◽  
Author(s):  
John LeBlanc ◽  
Andrew J. Mueller ◽  
Adrian Prinz ◽  
Manish J. Butte
Keyword(s):  
Planar Waveguide ◽  
Cell Counting ◽  
Optical Planar Waveguide

scholarly journals Optical Planar Waveguide Sensor with Integrated Digitally-Printed Light Coupling-in and Readout Elements

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 2856 ◽  
Author(s):  
Jorge Alamán ◽  
María López-Valdeolivas ◽  
Raquel Alicante ◽  
Carlos Sánchez-Somolinos
Keyword(s):  
Planar Waveguide ◽  
Cost Effective ◽  
Consumer Electronics ◽  
Light Sources ◽  
Optical Elements ◽  
Intensity Measurements ◽  
Sensing Platforms ◽  
Light Coupling ◽  
Energy Environment ◽  
Optical Planar Waveguide

Optical planar waveguide sensors, able to detect and process information from the environment in a fast, cost-effective, and remote fashion, are of great interest currently in different application areas including security, metrology, automotive, aerospace, consumer electronics, energy, environment, or health. Integration of networks of these systems together with other optical elements, such as light sources, readout, or detection systems, in a planar waveguide geometry is greatly demanded towards more compact, portable, and versatile sensing platforms. Herein, we report an optical temperature sensor with a planar waveguide architecture integrating inkjet-printed luminescent light coupling-in and readout elements with matched emission and excitation. The first luminescent element, when illuminated with light in its absorption band, emits light that is partially coupled into the propagation modes of the planar waveguide. Remote excitation of this element can be performed without the need for special alignment of the light source. A thermoresponsive liquid crystal-based film regulates the amount of light coupled out from the planar waveguide at the sensing location. The second luminescent element partly absorbs the waveguided light that reaches its location and emits at longer wavelengths, serving as a temperature readout element through luminescence intensity measurements. Overall, the ability of inkjet technology to digitally print luminescent elements demonstrates great potential for the integration and miniaturization of light coupling-in and readout elements in optical planar waveguide sensing platforms.

Electrohydrodynamic Printing via Spinneret with Conductive Probe

2013 ◽  
Vol 562-565 ◽  
pp. 1155-1160
Author(s):  
Yi Hong Lin ◽  
Guang Qi He ◽  
Hai Yan Liu ◽  
Jin Wei ◽  
Jian Yi Zheng ◽  
...  
Keyword(s):  
Field Strength ◽  
Applied Voltage ◽  
Industrial Application ◽  
Control Level ◽  
Direct Write ◽  
Electrical Field ◽  
Nano Structure ◽  
Electrical Field Strength ◽  
Electrohydrodynamic Printing ◽  
The Stability

Stability jet ejection and precision deposition are the two keys for industrial application of electrohydrodynamic printing. In this paper, inserted conductive probe is utilized to gain stability jet, which would increase the electrical field strength, reduce the back flow, onset and sustaining voltage. Lower applied voltage would enhance the stability of electrospun jet, in which fine jet can be used to direct-write orderly Micro/Nano-structure. With the guidance and constrain of inserted probe, the oscillating angle range of electrohydrodynamic jet is decreased to 3°from 15°, and the width of printed structures is 21μm in average that is much narrower than that printed from spinneret without probe (74μm in average). Spinneret with tip provides a good way to improve the control level of electrohydrodynamic printing, which would accelerate the industrial application of electrohydrodynamic printed Micro/Nano structure.

scholarly journals Mycotoxin Biosensor Based on Optical Planar Waveguide

Toxins ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 272 ◽  
Author(s):  
Ali Al-Jawdah ◽  
Alexei Nabok ◽  
Radhyah Jarrah ◽  
Alan Holloway ◽  
Anna Tsargorodska ◽  
...  
Keyword(s):  
Planar Waveguide ◽  
Optical Planar Waveguide

scholarly journals Multiple-Jet Needleless Electrospinning Approach via a Linear Flume Spinneret

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2052 ◽  
Author(s):  
Liang Wei ◽  
Chengkun Liu ◽  
Xue Mao ◽  
Jie Dong ◽  
Wei Fan ◽  
...  
Keyword(s):  
Process Parameters ◽  
Applied Voltage ◽  
Mass Production ◽  
Solution Concentration ◽  
Average Error ◽  
High Quality ◽  
Needleless Electrospinning ◽  
Nanofiber Diameter ◽  
Multiple Jets ◽  
Spinning Process

There is a great limitation to improving the quality and productivity of nanofibers through the conventional single-needle method. Using needleless electrospinning technology to generate multiple jets and enhance the productivity of nanofibers has attracted lots of interest for many years. This study develops a novel linear flume spinneret to fabricate nanofibers. Multiple jets with two rows can be formed simultaneously on the surface of the spinneret. The solution concentration has a significant impact on the average nanofiber diameter compared with applied voltage and collection distance. The effects of different spinning process parameters on the productivity of nanofibers are investigated. High-quality nanofibers with small nanofiber diameter and error can be fabricated successfully. The average nanofiber diameter is 108 ± 26 nm. The average error is 24%. The productivity of nanofibers can reach 4.85 ± 0.36 g/h, which is about 24 times more than that of the single-needle method. This novel linear flume spinneret needleless electrospinning technology exhibits huge potential for mass production of nanofibers in the field of industrialization.

Sign in / Sign up

Export Citation Format

Share Document