scholarly journals Dynamic and Stability Analysis of Multibolt Plane Joints under Normal Forces

2019 ◽  
Vol 9 (24) ◽  
pp. 5521
Author(s):  
Zhenyuan Li ◽  
Yimin Zhang ◽  
Changyou Li ◽  
Zhi Tan
Keyword(s):  
Structural Parameters ◽  
Three Dimensional ◽  
Harmonic Excitation ◽  
Design Parameters ◽  
Tightening Force ◽  
Normal Forces ◽  
Stiffness Characteristic ◽  
Stiffness Model ◽  
Fractal Parameters ◽  
Contact Surfaces

In this paper, a stiffness model of contact surfaces based on a modified three-dimensional fractal contact model is built, which is in accordance with the experiment results. Additionally, the static, dynamic, and stable behaviors of the bolt joint between the spindle box and the machine bed are analyzed. The mathematical relationship between fractal parameters of the surface topography and the stiffness of the system was established to accurately study its static behaviors. Asymmetric curves are observed from the load–deflection results and the nonlinear stiffness characteristic is also presented. It is shown that both the stress and the stiffness increase with the increase of the displacement near the static equilibrium position. Meanwhile, a simplified model without the consideration of roughness is compared with joint interfaces composed from milling, scraping, and grinding surfaces. Numerical calculation was employed to investigate effects of design parameters on the system under harmonic excitation when the processing method, excitation force, bolt pre-tightening force, topography parameters, and other structural parameters, i.e., nominal contact area, joint thickness and bolt number, are eventually regarded as the control parameters. The aim of the article is to analysis the influence of these parameters, including surface morphology, on nonlinear characteristics of the bolt interface with fractal contact surfaces andto provide some references to improve the characteristics.

scholarly journals Optimization of Parameters of Plastic Lined Pump Structural Based on Fluidsolid Coupling Analysis

2021 ◽  
Author(s):  
Lei Xiong ◽  
Lingfeng Tang ◽  
Bingxue Xu
Keyword(s):  
Orthogonal Experiment ◽  
Structural Parameters ◽  
Geometric Model ◽  
Three Dimensional ◽  
Field Analysis ◽  
Maximum Efficiency ◽  
Design Parameters ◽  
Range Analysis ◽  
Coupling Analysis ◽  
Maximum Displacement

Abstract The main objective of the present article was to obtain the optimum structure of the plastic lined pump under the condition of fluid-structure interaction. The structural parameters of the pump were calculated according to the given design parameters. The three-dimensional geometric model was established. The flow field analysis was carried out by CFD. The inlet diameter 𝐷𝑗 , outlet width 𝑏2, vane outlet angle 𝛽2 and vane number 𝑍 of the impeller were selected as the four factors to design orthogonal experiment. The results were analyzed by range analysis. The efficiency and NPSH were obtained as combined parameters under the evaluation index. The genetic algorithm was used to optimize its structural parameters, and the best structural combination parameters of the plastic-lined pump under the conditions of maximum efficiency and minimum cavitation were obtained. The efficiency was increased by 2.78% and the NPSH was reduced by 0.249707 after optimization. Finally, the stress distribution and displacement deformation under the condition of the coupling field were obtained by the fluidsolid coupling analysis. The maximum stress was 4.83mpa and the maximum displacement deformation was 3.1547e-5m.

scholarly journals Nonlinear Vibration Analysis of a Beam with a Breathing Crack

2019 ◽  
Vol 9 (18) ◽  
pp. 3874 ◽  
Author(s):  
Hui Long ◽  
Yilun Liu ◽  
Kefu Liu
Keyword(s):  
Nonlinear Vibration ◽  
Structural Parameters ◽  
Multiple Scale ◽  
Element Model ◽  
Harmonic Excitation ◽  
Breathing Crack ◽  
Cracked Beam ◽  
Nonlinear Responses ◽  
Stiffness Model ◽  
Stiffness Variation

The phenomena of sub- and super-harmonic responses make up one of the prominent nonlinear characteristics of a beam with a breathing crack. In order to fully understand the behaviors of sub- and super-harmonic resonances, it is necessary to analyze the nonlinear vibration of a beam-like structure with a breathing crack. In this study, a new stiffness model that considers the influence of the partial crack closure is proposed to model the stiffness variation of the cracked beam. Based on the finite element model of a beam with a breathing crack, the multiple-scale method is proposed to analyze the nonlinear vibration of a cracked beam subjected to harmonic excitation, and the relation between the nonlinear vibration of the cracked beam and the system parameters is obtained. An experiment is conducted to validate the analytical results. The study shows that the nonlinear responses of a beam with a breathing crack are affected by both the structural parameters and the crack parameters.

scholarly journals Brain capillary structures of schizophrenia cases and controls show a correlation with their neuron structures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rino Saiga ◽  
Masayuki Uesugi ◽  
Akihisa Takeuchi ◽  
Kentaro Uesugi ◽  
Yoshio Suzuki ◽  
...  
Keyword(s):  
Blood Vessels ◽  
Structural Parameters ◽  
Three Dimensional ◽  
Superior Temporal Gyrus ◽  
Anterior Cingulate ◽  
Dimensional Structure ◽  
Constant Diameter ◽  
The Mean ◽  
Cartesian Coordinate ◽  
Micrometer Scale

AbstractBrain blood vessels constitute a micrometer-scale vascular network responsible for supply of oxygen and nutrition. In this study, we analyzed cerebral tissues of the anterior cingulate cortex and superior temporal gyrus of schizophrenia cases and age/gender-matched controls by using synchrotron radiation microtomography or micro-CT in order to examine the three-dimensional structure of cerebral vessels. Over 1 m of cerebral blood vessels was traced to build Cartesian-coordinate models, which were then used for calculating structural parameters including the diameter and curvature of the vessels. The distribution of vessel outer diameters showed a peak at 7–9 μm, corresponding to the diameter of the capillaries. Mean curvatures of the capillary vessels showed a significant correlation to the mean curvatures of neurites, while the mean capillary diameter was almost constant, independent of the cases. Our previous studies indicated that the neurites of schizophrenia cases are thin and tortuous compared to controls. The curved capillaries with a constant diameter should occupy a nearly constant volume, while neurons suffering from neurite thinning should have reduced volumes, resulting in a volumetric imbalance between the neurons and the vessels. We suggest that the observed structural correlation between neurons and blood vessels is related to neurovascular abnormalities in schizophrenia.

scholarly journals Coupled Fluid–Solid Numerical Simulation for Flow Field Characteristics and Supporting Performance of Flexible Support Cylindrical Gas Film Seal

Aerospace ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 97
Author(s):  
Junfeng Sun ◽  
Meihong Liu ◽  
Zhen Xu ◽  
Taohong Liao ◽  
Xiangping Hu ◽  
...  
Keyword(s):  
Flow Field ◽  
Film Thickness ◽  
Fluid Dynamic ◽  
Structural Characteristics ◽  
Structural Parameters ◽  
Equivalent Stress ◽  
Three Dimensional ◽  
High Rotational Speed ◽  
Flexible Support ◽  
Flow Field Characteristics

A new type of cylindrical gas film seal (CGFS) with a flexible support is proposed according to the working characteristics of the fluid dynamic seal in high-rotational-speed fluid machinery, such as aero-engines and centrifuges. Compared with the CGFS without a flexible support, the CGFS with flexible support presents stronger radial floating characteristics since it absorbs vibration and reduces thermal deformation of the rotor system. Combined with the structural characteristics of a film seal, an analytical model of CGFS with a flexible wave foil is established. Based on the fluid-structure coupling analysis method, the three-dimensional flow field of a straight-groove CGFS model is simulated to study the effects of operating and structural parameters on the steady-state characteristics and the effects of gas film thickness, eccentricity, and the number of wave foils on the equivalent stress of the flexible support. Simulation results show that the film stiffness increases significantly when the depth of groove increases. When the gas film thickness increases, the average equivalent stress of the flexible support first decreases and then stabilizes. Furthermore, the number of wave foils affects the average foils thickness. Therefore, when selecting the number of wave foils, the support stiffness and buffer capacity should be considered simultaneously.

Design and optimization of bump (compression surface) for diverterless supersonic inlet

2021 ◽  
pp. 095441002110029
Author(s):  
Irsalan Arif ◽  
Hassan Iftikhar ◽  
Ali Javed
Keyword(s):  
Fitness Function ◽  
Supersonic Jet ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Least Square ◽  
Pressure Recovery ◽  
Design Parameters ◽  
Inlet System ◽  
Design And Optimization ◽  
Supersonic Inlet

In this article design and optimization scheme of a three-dimensional bump surface for a supersonic aircraft is presented. A baseline bump and inlet duct with forward cowl lip is initially modeled in accordance with an existing bump configuration on a supersonic jet aircraft. Various design parameters for bump surface of diverterless supersonic inlet systems are identified, and design space is established using sensitivity analysis to identify the uncertainty associated with each design parameter by the one-factor-at-a-time approach. Subsequently, the designed configurations are selected by performing a three-level design of experiments using the Box–Behnken method and the numerical simulations. Surrogate modeling is carried out by the least square regression method to identify the fitness function, and optimization is performed using genetic algorithm based on pressure recovery as the objective function. The resultant optimized bump configuration demonstrates significant improvement in pressure recovery and flow characteristics as compared to baseline configuration at both supersonic and subsonic flow conditions and at design and off-design conditions. The proposed design and optimization methodology can be applied for optimizing the bump surface design of any diverterless supersonic inlet system for maximizing the intake performance.

scholarly journals Research on the Computed Tomography Pebble Flow Detecting System for HTR-PM

2017 ◽  
Vol 2017 ◽  
pp. 1-13
Author(s):  
Xin Wan ◽  
Ximing Liu ◽  
Jichen Miao ◽  
Peng Cong ◽  
Yuai Zhang ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Three Dimensional ◽  
Helical Ct ◽  
Design Parameters ◽  
Three Dimensional Model ◽  
Safe Operation ◽  
Cross Sectional ◽  
Ct System ◽  
Near Future ◽  
Pebble Flow

Pebble dynamics is important for the safe operation of pebble-bed high temperature gas-cooled reactors and is a complicated problem of great concern. To investigate it more authentically, a computed tomography pebble flow detecting (CT-PFD) system has been constructed, in which a three-dimensional model is simulated according to the ratio of 1 : 5 with the core of HTR-PM. A multislice helical CT is utilized to acquire the reconstructed cross-sectional images of simulated pebbles, among which special tracer pebbles are designed to indicate pebble flow. Tracer pebbles can be recognized from many other background pebbles because of their heavy kernels that can be resolved in CT images. The detecting principle and design parameters of the system were demonstrated by a verification experiment on an existing CT system in this paper. Algorithms to automatically locate the three-dimensional coordinates of tracer pebbles and to rebuild the trajectory of each tracer pebble were presented and verified. The proposed pebble-detecting and tracking technique described in this paper will be implemented in the near future.

scholarly journals Reliability Evaluation of Fan-Out Type 3D Packaging-On-Packaging

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 295
Author(s):  
Pao-Hsiung Wang ◽  
Yu-Wei Huang ◽  
Kuo-Ning Chiang
Keyword(s):  
Finite Element ◽  
Thermal Cycling ◽  
Glass Substrate ◽  
High Speed ◽  
Coefficient Of Thermal Expansion ◽  
Three Dimensional ◽  
Design Parameters ◽  
Time To Failure ◽  
Wafer Level ◽  
Fine Pitch

The development of fan-out packaging technology for fine-pitch and high-pin-count applications is a hot topic in semiconductor research. To reduce the package footprint and improve system performance, many applications have adopted packaging-on-packaging (PoP) architecture. Given its inherent characteristics, glass is a good material for high-speed transmission applications. Therefore, this study proposes a fan-out wafer-level packaging (FO-WLP) with glass substrate-type PoP. The reliability life of the proposed FO-WLP was evaluated under thermal cycling conditions through finite element simulations and empirical calculations. Considering the simulation processing time and consistency with the experimentally obtained mean time to failure (MTTF) of the packaging, both two- and three-dimensional finite element models were developed with appropriate mechanical theories, and were verified to have similar MTTFs. Next, the FO-WLP structure was optimized by simulating various design parameters. The coefficient of thermal expansion of the glass substrate exerted the strongest effect on the reliability life under thermal cycling loading. In addition, the upper and lower pad thicknesses and the buffer layer thickness significantly affected the reliability life of both the FO-WLP and the FO-WLP-type PoP.

scholarly journals Application of the erosion algorithm in modeling of structures behavior under impulse loads

2019 ◽  
Vol 221 ◽  
pp. 01003
Author(s):  
Pavel Radchenko ◽  
Stanislav Batuev ◽  
Andrey Radchenko
Keyword(s):  
Finite Element ◽  
High Velocity ◽  
Three Dimensional ◽  
Computer Software ◽  
Dynamic Loads ◽  
Complex Structures ◽  
Numerical Studies ◽  
Contact Surfaces ◽  
Fracture Of Materials ◽  
Solid Bodies

The paper presents results of applying approach to simulation of contact surfaces fracture under high velocity interaction of solid bodies. The algorithm of erosion -the algorithm of elements removing, of new surface building and of mass distribution after elements fracture at contact boundaries is consider. The results of coordinated experimental and numerical studies of fracture of materials under impact are given. Authors own finite element computer software program EFES, allowing to simulate a three-dimensional setting behavior of complex structures under dynamic loads, has been used for the calculations.

Research on the Reliability of Box for Gear Test Bed

2011 ◽  
Vol 121-126 ◽  
pp. 1744-1748
Author(s):  
Xiang Yang Jin ◽  
Tie Feng Zhang ◽  
Li Li Zhao ◽  
He Teng Wang ◽  
Xiang Yi Guan
Keyword(s):  
Power Flow ◽  
Dynamic Performance ◽  
Three Dimensional ◽  
Design Parameters ◽  
The Finite Element Method ◽  
Test Bed ◽  
Kinematics Simulation ◽  
Beveloid Gears ◽  
Overall Performance

To determine the efficiency, load-bearing capacity and fatigue life of beveloid gears with intersecting axes, we design a mechanical gear test bed with closed power flow. To test the quality of its structure and predict its overall performance, we establish a three-dimensional solid model for various components based on the design parameters and adopt the technology of virtual prototyping simulation to conduct kinematics simulation on it. Then observe and verify the interactive kinematic situation of each component. Moreover, the finite element method is also utilized to carry out structural mechanics and dynamics analysis on some key components. The results indicate that the test bed can achieve the desired functionality, and the static and dynamic performance of some key components can also satisfy us.

Stiffness Constants for Composite Beams Including Large Initial Twist and Curvature Effects

1995 ◽  
Vol 48 (11S) ◽  
pp. S61-S67 ◽  
Author(s):  
Carlos E. S. Cesnik ◽  
Dewey H. Hodges
Keyword(s):  
Wave Length ◽  
Three Dimensional ◽  
Radius Of Curvature ◽  
Cross Sectional ◽  
Curvature Effects ◽  
Three Dimensional Representation ◽  
Stiffness Model ◽  
Sectional Analysis ◽  
Three Dimensional Elasticity ◽  
Coupling Phenomena

An asymptotically exact methodology, based on geometrically nonlinear, three-dimensional elasticity, is presented for cross-sectional analysis of initially curved and twisted, nonhomogeneous, anisotropic beams. Through accounting for all possible deformation in the three-dimensional representation, the analysis correctly accounts for the complex elastic coupling phenomena in anisotropic beams associated with shear deformation. The analysis is subject only to the restrictions that the strain is small relative to unity and that the maximum dimension of the cross section is small relative to the wave length of the deformation and to the minimum radius of curvature and/or twist. The resulting cross-sectional elastic constants exhibit second-order dependence on the initial curvature and twist. As is well known, the associated geometrically-exact, one-dimensional equilibrium and kinematical equations also depend on initial twist and curvature. The corrections to the stiffness model derived herein are also necessary in general for proper representation of initially curved and twisted beams.

Sign in / Sign up

Export Citation Format

Share Document