scholarly journals Editorial on Special Issue “Textile-Reinforced Cement Composites: New Insights into Structural and Material Engineering”

2020 ◽  
Vol 10 (2) ◽  
pp. 576
Author(s):  
Tine Tysmans ◽  
Jan Wastiels
Keyword(s):  
Reinforced Concrete ◽  
Fatigue Behaviour ◽  
Future Research ◽  
Fibre Reinforcement ◽  
Cement Composites ◽  
Special Issue ◽  
Textile Reinforced Concrete ◽  
Analysis And Design ◽  
Material Engineering ◽  
Reinforced Cement

This special issue presents the latest advances in the field of Textile-Reinforced Cement Composites, including Textile-Reinforced Concrete (TRC), Textile-Reinforced Mortar (TRM), Fabric-Reinforced Cementitious Matrix (FRCM), etc. These composite materials distinguish themselves from other fibre reinforced concrete materials by their strain-hardening behaviour under tensile loading. This Special Issue is composed of 14 papers covering new insights in structural and material engineering. The papers include investigations on the level of the fibre reinforcement system as well as on the level of the composites, investigating their impact and fatigue behaviour, durability and fire behaviour. Both strengthening of existing structures and development of new structural systems such as lightweight sandwich systems are presented, and analysis and design methods are discussed. This Special Issue demonstrates the broadness and intensity of the ongoing advancements in the field of Textile-Reinforced Cement composites and the importance of several future research directions.

scholarly journals Numerical Simulation of the Mechanical Behavior of Fiber-Reinforced Cement Composites Subjected Dynamic Loading

2021 ◽  
Vol 11 (3) ◽  
pp. 1112
Author(s):  
Nikita Belyakov ◽  
Olga Smirnova ◽  
Aleksandr Alekseev ◽  
Hongbo Tan
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Dynamic Loading ◽  
Fiber Reinforced Concrete ◽  
Cement Composites ◽  
Fiber Reinforced ◽  
Lab Experiments ◽  
Reinforced Cement ◽  
Underground Workings ◽  
Concrete Damaged Plasticity

The problem of damage accumulation in fiber-reinforced concrete to structures supporting underground workings and tunnel linings against dynamic loading is insufficiently studied. The mechanical properties were determined and the mechanism of destruction of fiber-reinforced concrete with different reinforcement parameters is described. The parameters of the Concrete Damaged Plasticity model for fiber-reinforced concrete at different reinforcement properties are based on the results of lab experiments. Numerical simulation of the composite concrete was performed in the Simulia Abaqus software package (Dassault Systemes, Vélizy-Villacoublay, France). Modeling of tunnel lining based on fiber-reinforced concrete was performed under seismic loading.

scholarly journals Nanocelluloses: Natural-Based Materials for Fiber-Reinforced Cement Composites. A Critical Review

Polymers ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 518 ◽  
Author(s):  
Ana Balea ◽  
Elena Fuente ◽  
Angeles Blanco ◽  
Carlos Negro
Keyword(s):  
Raw Material ◽  
Modulus Of Rupture ◽  
Cement Matrix ◽  
Future Research ◽  
Cementitious Composites ◽  
Natural Material ◽  
Cement Composites ◽  
Fiber Reinforced ◽  
Industrial Sectors ◽  
Reinforced Cement

Nanocelluloses (NCs) are bio-based nano-structurated products that open up new solutions for natural material sciences. Although a high number of papers have described their production, properties, and potential applications in multiple industrial sectors, no review to date has focused on their possible use in cementitious composites, which is the aim of this review. It describes how they could be applied in the manufacturing process as a raw material or an additive. NCs improve mechanical properties (internal bonding strength, modulus of elasticity (MOE), and modulus of rupture (MOR)), alter the rheology of the cement paste, and affect the physical properties of cements/cementitious composites. Additionally, the interactions between NCs and the other components of the fiber cement matrix are analyzed. The final result depends on many factors, such as the NC type, the dosage addition mode, the dispersion, the matrix type, and the curing process. However, all of these factors have not been studied in full so far. This review has also identified a number of unexplored areas of great potential for future research in relation to NC applications for fiber-reinforced cement composites, which will include their use as a surface treatment agent, an anionic flocculant, or an additive for wastewater treatment. Although NCs remain expensive, the market perspective is very promising.

Comparison of Stress-Strain Diagrams in Different Age of the Cement Matrix for Textile Reinforced Concrete

2015 ◽  
Vol 824 ◽  
pp. 155-159 ◽  
Author(s):  
Filip Vogel ◽  
Ondřej Holčapek ◽  
Petr Konvalinka
Keyword(s):  
Reinforced Concrete ◽  
Load Force ◽  
Experimental Program ◽  
Cement Matrix ◽  
Textile Reinforced Concrete ◽  
Stress Strain ◽  
Ordinary Concrete ◽  
Deformation Speed ◽  
Reinforced Cement ◽  
C 30

This article deals with cement matrix for the textile reinforced concrete. It is necessary to know maximum of the mechanical properties of cement matrix for using textile reinforced concrete. The main topic of this article is to determine stress-strain diagrams at various age of the cement matrix. The compressive strength of the cement matrix was determined by using cube specimens (100 x 100 x 100 mm). The cement matrix, steel fibre reinforced cement matrix and ordinary concrete C 30/37 were tested at age 12 and 18 hours and 1, 7, 28 and 45 days. Cubes were tested in one-axial press. Loading of cubes was controlled by increase of deformation. Speed of loading was 0.008 mm/s. Time, load force and deformation were recorded for determination stress strain diagrams. The results of the experimental program and stress-strain diagrams were compared with each other in conclusion of this article.

scholarly journals Probabilistic fatigue analysis of ultra-high-performance fibre-reinforced concrete under thermal effects

2018 ◽  
Vol 165 ◽  
pp. 12001
Author(s):  
José D. Ríos ◽  
Héctor Cifuentes
Keyword(s):  
Reinforced Concrete ◽  
Thermal Effects ◽  
High Performance ◽  
High Performance Concrete ◽  
Fatigue Behaviour ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Ultra High Performance Concrete ◽  
Polypropylene Fibres ◽  
High Performance Fibre

This paper describes the influence of the temperature and the fibre reinforcement on the flexural fatigue behaviour of an ultra-high-performance fibre-reinforced concrete. Three-point bending fatigue tests were carried out for an ultra-high-performance concrete subjected to different temperatures ranging from room temperature up to 300 ºC and considering three different types of reinforcement: a) steel fibres, b) hybrid steel and polypropylene fibres and c) non-reinforced (reference matrix). The fatigue behaviour was assessed from the S-N fields obtained through a probabilistic fatigue model developed by Castillo and Fernández-Canteli. The influence of the type of reinforcement on the fatigue behaviour was analysed by SN curves. An analysis of the thermal effects in the fatigue life of the ultra-high-performance concrete has also been carried out. The results showed the most suitable fibre reinforcement among the analysed options to get the best fatigue behaviour in accordance to the exposure temperature.

scholarly journals Electrical, Piezoresistive and Electromagnetic Properties of Graphene Reinforced Cement Composites: A Review

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3220
Author(s):  
Shengchang Mu ◽  
Jianguang Yue ◽  
Yu Wang ◽  
Chuang Feng
Keyword(s):  
Material Properties ◽  
High Performance ◽  
Cement Composite ◽  
Electromagnetic Properties ◽  
Cement Matrix ◽  
Future Research ◽  
Cement Composites ◽  
Preparation Methods ◽  
Reinforced Cement ◽  
Filler Dispersion

Due to their excellent combination of mechanical and physical properties, graphene and its derivatives as reinforcements have been drawing tremendous attention to the development of high-performance and multifunctional cement-based composites. This paper is mainly focused on reviewing existing studies on the three material properties (electrical, piezoresistive and electromagnetic) correlated to the multifunction of graphene reinforced cement composite materials (GRCCMs). Graphene fillers have demonstrated better reinforcing effects on the three material properties involved when compared to the other fillers, such as carbon fiber (CF), carbon nanotube (CNT) and glass fiber (GF). This can be attributed to the large specific surface area of graphene fillers, leading to improved hydration process, microstructures and interactions between the fillers and the cement matrix in the composites. Therefore, studies on using some widely adopted methods/techniques to characterize and investigate the hydration and microstructures of GRCCMs are reviewed and discussed. Since the types of graphene fillers and cement matrices and the preparation methods affect the filler dispersion and material properties, studies on these aspects are also briefly summarized and discussed. Based on the review, some challenges and research gaps for future research are identified. This review is envisaged to provide a comprehensive literature review and more insightful perspectives for research on developing multifunctional GRCCMs.

The Experimental Testing of the Tensile Strength of the Steel Fibre Reinforced Cement Matrix

2015 ◽  
Vol 824 ◽  
pp. 197-200
Author(s):  
Jan Machovec ◽  
Filip Vogel ◽  
Petr Konvalinka
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Steel Fibre ◽  
Experimental Testing ◽  
Experimental Program ◽  
Cement Matrix ◽  
Textile Reinforced Concrete ◽  
Steel Reinforced Concrete ◽  
Test Steel ◽  
Reinforced Cement

This article is focused on state of knowledge about experimental testing of uniaxial tension strength of specimens from cement-based composites. We searched for various types of experimental testing of tensile strength, shapes of specimens or type of reinforcement. There is our own experimental program at the end of this article. Our aim is to find the best way to test steel fibre reinforced cement matrix for textile reinforced concrete in oneaxial tension. Textile reinforced concrete has many advantages (e.g.: no covering layer, higher ductility) and may be used instead of common steel reinforced concrete or as a method to repair old structures (e.g.: to bind columns).

scholarly journals Effect of Steel Fibre Reinforcement on Flexural Fatigue Behaviour of Notched Structural Concrete

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5854
Author(s):  
Jose A. Sainz-Aja ◽  
Laura Gonzalez ◽  
Carlos Thomas ◽  
Jokin Rico ◽  
Juan A. Polanco ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Steel Fibre ◽  
Critical Energy ◽  
Fatigue Behaviour ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Bending Fatigue ◽  
Cracked Concrete ◽  
Specific Geometry ◽  
New Criteria

One of the biggest challenges in facilitating the installation of concrete is the development of fibre-reinforced concrete. Although nowadays fibre reinforced concrete is relatively common, it is still necessary to deepen in the study on its behaviour, especially regarding its fatigue behaviour. This paper proposes a new methodology to analyse the bending fatigue behaviour of notched test specimens. From these tests, it was possible to verify that, despite carrying out the tests with load control, the presence of fibres extends the fatigue life of the concrete after cracking. This effect is of great importance since during the extra lifetime with the cracked concrete, the damage to the concrete will be evident and the corresponding maintenance measures can be carried out. Regarding the analysis of the results, in addition to obtaining a traditional S-N curve, two new criteria have been applied, namely energy and notch growth. From these two new approaches, it was possible to determine critical energy values that can be used as predictive indicators of the collapse of the element. Moreover, from the notch growth analysis, it was possible to determine crack growth rate as a function of the stress conditions for the concrete and the specific geometry. From the comparison among the results obtained from the different tests, a limit cracking index of 0.05 mm can be defined.

High Strength Concrete Matrix for Textile Reinforced Concrete Production in Special Curing Conditions

2015 ◽  
Vol 824 ◽  
pp. 161-165
Author(s):  
Ondřej Holčapek
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
High Strength ◽  
Cement Matrix ◽  
Textile Reinforced Concrete ◽  
Curing Conditions ◽  
Concrete Production ◽  
Reinforced Cement ◽  
Curing Method ◽  
Concrete Matrix

This contribution deals with interesting and progressive curing method applied to fresh concrete matrix for textile reinforced concrete production. The application of high pressure 0.3 MPa and temperature 130 °C in 100 % humidity environment for 4 hours was performed. Cement matrix and steel fibers reinforced cement matrix has been investigated. The goal of this research is to quantified compressive strength, flexure strength, bulk density and dynamic modulus of elasticity of both mixtures. These parameters were investigated after hydrothermal curing process at the ages 6, 12, 15, 18, 21 and 24 hour after first contact of water with cement. All parameters were investigated on specimens 40 x 40 x 160 mm3 and the destructive tests were controlled by increase of deformation. Special curing condition led to an increase of the compressive strength by more than 10 % in case of cement matrix, and by more than 40 % in case of fiber reinforced cement matrix.

Sign in / Sign up

Export Citation Format

Share Document