scholarly journals Analysis of Flow Characteristics and Pressure Drop for an Impinging Plate Fin Heat Sink with Elliptic Bottom Profiles

2019 ◽  
Vol 10 (1) ◽  
pp. 225 ◽  
Author(s):  
Zhipeng Duan ◽  
Xianghui Lv ◽  
Hao Ma ◽  
Liangbin Su ◽  
Mengqiao Zhang
Keyword(s):  
Pressure Drop ◽  
Numerical Simulations ◽  
Heat Sink ◽  
Flow Characteristics ◽  
Heat Sinks ◽  
Continuum Flow ◽  
Improved Model ◽  
The Right ◽  
Velocity Pressure ◽  
Impinging Flow

The performance of impingement air cooled plate fin heat sinks differs significantly from that of parallel flow plate fin heat sinks. The impinging flow situations at the entrance and the right-angled bends of the plate fin heat sink are quite involved. Flow characteristics of a plate fin heat sink with elliptic bottom profiles cooled by a rectangular impinging jet with different inlet widths are studied by numerical simulations. The results of pressure drop of numerical simulations and experimental results match quite well. The numerical results show that at the same flow rate, the pressure drop decreases with the increase of the impingement inlet width, and the pressure drop increases significantly with the increase of the fin height. The larger the impingement inlet width of air-cooled plate fin heat sink, the milder the pressure drop changes with velocity. Pressure drop for an impinging plate fin heat sink without elliptic bottom profiles is larger than that with elliptic bottom profiles at the same inlet width and velocity. Based on the fundamental developing laminar continuum flow theory, an improved model which is very concise and nice for quick real world approximations is proposed. Furthermore, this paper verifies the effectiveness of this simple impinging pressure drop model.

Fluid Flow Characteristics for Partially-Confined Compact Plain-Plate-Fin Heat Sinks

2005 ◽  
Author(s):  
M. P. Wang ◽  
T. Y. Wu ◽  
J. T. Horng ◽  
C. Y. Lee ◽  
Y. H. Hung
Keyword(s):  
Experimental Data ◽  
Fluid Flow ◽  
Pressure Drop ◽  
Heat Sink ◽  
Flow Behavior ◽  
Flow Characteristics ◽  
Heat Sinks ◽  
Experimental Investigations ◽  
Channel Height ◽  
Fluid Flow Characteristics

A series of experimental investigations with a stringent measurement method on the study of the fluid flow behavior for confined compact heat sinks in forced convection have been successfully conducted. In the present study, a theoretical model to effectively predict the velocity and pressure drop for partially-confined heat sinks has been successfully developed. The air velocities flowing into heat sink Us through side bypass U1 and top bypass U2 for various 0.47<H/Hc<1 ratios are evaluated, where H/Hc is the ratio of the heat sink height to channel height. The maximum and average deviations of the velocities predicted by the present model from the experimental data are less than 20.31% and 13.13%, respectively, for confined compact heat sinks. Besides, the results show a good agreement between the predicted results and the experimental data of the pressure drop for the cases of H/Hc = 1. Nevertheless, the relative deviation of the predictions from the experimental data becomes more significant with decreasing H/Hc ratio, i.e., increasing the top bypass of confined compact heat sink. A new modified correlation of pressure drop including the H/Hc effect is presented. The maximum and average deviations of the results predicted by the new correlation from the experimental data are 14.48% and 7.72%, respectively.

Study on the Flow Characteristics of Shengli Oilfield Super Heavy Oil

2017 ◽  
Vol 10 (1) ◽  
pp. 69-78 ◽  
Author(s):  
Wang Shou-long ◽  
Li Ai-fen ◽  
Peng Rui-gang ◽  
Yu Miao ◽  
Fu Shuai-shi
Keyword(s):  
Pressure Drop ◽  
Pressure Gradient ◽  
Heavy Oil ◽  
Flow Characteristics ◽  
Fluid Viscosity ◽  
Linear Flow ◽  
Start Up ◽  
Non Linear ◽  
Core Permeability ◽  
Velocity Pressure

Objective:The rheological properties of oil severely affect the determination of percolation theory, development program, production technology and oil-gathering and transferring process, especially for super heavy oil reservoirs. This paper illustrated the basic seepage morphology of super heavy oil in micro pores based on its rheological characteristics.Methods:The non-linear flow law and start-up pressure gradient of super heavy oil under irreducible water saturation at different temperatures were performed with different permeable sand packs. Meanwhile, the empirical formulas between start-up pressure gradient, the parameters describing the velocity-pressure drop curve and the ratio of gas permeability of a core to fluid viscosity were established.Results:The results demonstrate that temperature and core permeability have significant effect on the non-linear flow characteristics of super heavy oil. The relationship between start-up pressure gradient of oil, the parameters representing the velocity-pressure drop curve and the ratio of core permeability to fluid viscosity could be described as a power function.Conclusion:Above all, the quantitative description of the seepage law of super heavy oil reservoir was proposed in this paper, and finally the empirical diagram for determining the minimum and maximum start-up pressure of heavy oil with different viscosity in different permeable formations was obtained.

Compact Modeling of Forced Flow in Longitudinal Fin Heat Sinks With Tip Bypass

2003 ◽  
Vol 125 (3) ◽  
pp. 319-324 ◽  
Author(s):  
C. B. Coetzer ◽  
J. A. Visser
Keyword(s):  
Pressure Drop ◽  
Heat Sink ◽  
Heat Sinks ◽  
Compact Model ◽  
Forced Flow ◽  
Compact Modeling ◽  
Transfer Coefficients ◽  
Wide Range ◽  
Laminar And Turbulent Flow ◽  
Improved Accuracy

This paper introduces a compact model to predict the interfin velocity and the resulting pressure drop across a longitudinal fin heat sink with tip bypass. The compact model is based on results obtained from a comprehensive study into the behavior of both laminar and turbulent flow in longitudinal fin heat sinks with tip bypass using CFD analysis. The new compact flow prediction model is critically compared to existing compact models as well as to the results obtained from the CFD simulations. The results indicate that the new compact model shows at least a 4.5% improvement in accuracy predicting the pressure drop over a wide range of heat sink geometries and Reynolds numbers simulated. The improved accuracy in velocity distribution between the fins also increases the accuracy of the calculated heat transfer coefficients applied to the heat sinks.

Compact Modeling of Fluid Flow and Heat Transfer in Straight Fin Heat Sinks

2004 ◽  
Vol 126 (2) ◽  
pp. 247-255 ◽  
Author(s):  
Duckjong Kim ◽  
Sung Jin Kim
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Fluid Flow ◽  
Pressure Drop ◽  
Heat Sink ◽  
Volume Averaging ◽  
Thermal Design ◽  
Heat Sinks ◽  
Compact Modeling ◽  
Flow And Heat Transfer

In the present work, a compact modeling method based on a volume-averaging technique is presented. Its application to an analysis of fluid flow and heat transfer in straight fin heat sinks is then analyzed. In this study, the straight fin heat sink is modeled as a porous medium through which fluid flows. The volume-averaged momentum and energy equations for developing flow in these heat sinks are obtained using the local volume-averaging method. The permeability and the interstitial heat transfer coefficient required to solve these equations are determined analytically from forced convective flow between infinite parallel plates. To validate the compact model proposed in this paper, three aluminum straight fin heat sinks having a base size of 101.43mm×101.43mm are tested with an inlet velocity ranging from 0.5 m/s to 2 m/s. In the experimental investigation, the heat sink is heated uniformly at the bottom. The resulting pressure drop across the heat sink and the temperature distribution at its bottom are then measured and are compared with those obtained through the porous medium approach. Upon comparison, the porous medium approach is shown to accurately predict the pressure drop and heat transfer characteristics of straight fin heat sinks. In addition, evidence indicates that the entrance effect should be considered in the thermal design of heat sinks when Re Dh/L>∼O10.

scholarly journals Mathematical modeling and numerical simulation of heat dissipation in led bulbs

2020 ◽  
Vol 24 (3 Part A) ◽  
pp. 1877-1884 ◽  
Author(s):  
Diego Alarcón ◽  
Eduardo. Balvís ◽  
Ricardo Bendaña ◽  
Alberto Conejero ◽  
de Fernández ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Numerical Simulation ◽  
Numerical Simulations ◽  
Heat Sink ◽  
Heat Dissipation ◽  
Thermal Contact ◽  
Heat Sinks ◽  
Experimental Measurements ◽  
Heating And Cooling ◽  
The Common

We present a detailed study of heating and cooling processes in LED luminaires with passive heat sinks. Our analysis is supported by numerical simulations as well as experimental measurements, carried on commercial systems used for outdoor lighting. We have focused our analysis on the common case of a single LED source in thermal contact with an aluminum passive heat sink, obtaining an excellent agreement with experimental measurements and the numerical simulations performed. Our results can be easily expanded, without loss of generality, to similar systems.

Optimization Under Uncertainty of Manifold Microchannel Heat Sinks

2012 ◽  
Author(s):  
Suchismita Sarangi ◽  
Karthik K. Bodla ◽  
Suresh V. Garimella ◽  
Jayathi Y. Murthy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Pressure Drop ◽  
Transfer Coefficient ◽  
Heat Sink ◽  
Heat Sinks ◽  
Optimization Under Uncertainty ◽  
Microchannel Heat Sink ◽  
Probabilistic Optimization ◽  
Manifold Microchannel

Conventional microchannel heat sinks provide good heat dissipation capability but are associated with high pressure drop and corresponding pumping power. The use of a manifold system that distributes the flow into the microchannels through multiple, alternating inlet and outlet pairs is investigated here. This manifold arrangement greatly reduces the pressure drop incurred due to the smaller flow paths, while simultaneously increasing the heat transfer coefficient by tripping the thermal boundary layers. A three-dimensional numerical model is developed and validated, to study the effect of various geometric parameters on the performance of the manifold microchannel heat sink. Apart from a deterministic analysis, a probabilistic optimization study is also performed. In the presence of uncertainties in the geometric and operating parameters of the system, this probabilistic optimization approach yields an optimal design that is also robust and reliable. Uncertainty-based optimization also yields auxiliary information regarding local and global sensitivities and helps identify the input parameters to which outputs are most sensitive. This information can be used to design improved experiments targeted at the most sensitive inputs. Optimization under uncertainty also provides a quantitative estimate of the allowable uncertainty in input parameters for an acceptable uncertainty in the relevant output parameters. The optimal geometric design parameters with uncertainties that maximize heat transfer coefficient while minimizing pressure drop for fixed input conditions are identified for a manifold microchannel heat sink. A comparison between the deterministic and probabilistic optimization results is also presented.

Comparative Study of Effective Cooling in Microchannel Heat Sinks (MCHS) With Nanofluid and Hydrophobic Nanostructures Using Computational Fluid Dynamics

2020 ◽  
Author(s):  
Darryl Jennings ◽  
Sonya Smith
Keyword(s):  
Pressure Drop ◽  
Analytical Model ◽  
Convection Heat Transfer ◽  
Flow Characteristics ◽  
Heat Sinks ◽  
Cross Sectional ◽  
Ansys Fluent ◽  
Cooling Flow ◽  
Micro Channels ◽  
The Impact

Abstract The goal of this research is to present an analytical model of nanostructures and study the effects of their geometry on the performance of micro channels. The pressure drop experienced by micro channels is of interest as it presents a limit on forced convection heat transfer. This work will demonstrate how the presence of nanostructures primarily affects pressure drop as well as other cooling flow characteristics. Additional work in the impact of microchannel cross-sectional geometry and friction factor formulation is provided as well. Multiple transient analyses were performed in ANSYS FLUENT to ascertain performance characteristics of microchannels without the presence of hydrophobic nanostructures. The results were compared to the analytical model developed in this study.

Heat Transfer Enhancement in a Microchannel Heat Sink with Trapezoidal Cavities on the Side Walls

2016 ◽  
Vol 819 ◽  
pp. 127-131
Author(s):  
Navin Raja Kuppusamy ◽  
N.N.N. Ghazali ◽  
Saidur Rahman ◽  
M.A. Omar Awang ◽  
Hussein A. Mohammed
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Fluid Mixing ◽  
Microchannel Heat Sink ◽  
Transfer Enhancement ◽  
Side Walls

The present study focuses on the numerical study of thermal and flow characteristics in a microchannel heat sink with alternating trapezoidal cavities in sidewall (MTCS). The effects of flow rate and heat flux on friction factor and Nusselt are presented. The results showed considerable improvement heat transfer performance micro channel heat sink with alternating trapezoidal cavities in sidewall with an acceptable pressure drop. The heat transfer rate has improved in the cavity area due the greater fluid mixing in fluid vortices and thermal boundary layer disruption. The slipping over the reentrant cavities and pressure gain reduces pressure drop appears as the reason behind of only minor pressure drop due to the cavities.

THE EFFECT OF DIFFERENT LOCATIONS OF TRACHEAL STENOSIS TO THE FLOW CHARACTERISTICS USING RECONSTRUCTED CT-SCANNED IMAGE

2012 ◽  
Vol 12 (04) ◽  
pp. 1250066 ◽  
Author(s):  
NASRUL HADI JOHARI ◽  
KAHAR OSMAN ◽  
ZULIAZURA MOHD SALLEH ◽  
JUHARA HARON ◽  
MOHAMMED RAFIQ ABDUL KADIR
Keyword(s):  
Pressure Drop ◽  
Flow Rate ◽  
Tracheal Stenosis ◽  
Flow Behavior ◽  
Flow Characteristics ◽  
Flow Conditions ◽  
Inlet Flow Rate ◽  
Exhaled Air ◽  
Scanned Image ◽  
The Right

The presence of tracheal stenosis would alter the flow path of the inhaled and exhaled air and subsequently changed the flow behavior inside the trachea and main bronchi. Therefore, it was our aim to investigate and predict the changes of flow behavior along with the pressure distribution with respect to the presence of stenosis on the tracheal lumen. In this study, actual CT scan images were extracted for flow modeling purposes. The images were then reconstructed to mimic the effect of different stenosis locations. This method overcomes the problem of the absence of actual images for different tracheal stenosis locations. The flow was subjected to different breathing situations corresponding to low, moderate and rigorous activities. The results showed that for flow over the stenosis farthest from the bifurcation, the pressure drop was insignificant for all breathing situations. At the same time, the inlet flow rate at the bifurcation showed less air flows into the right lung as compared to healthy flow conditions. On the other hand, for the flow over stenosis closest to the bifurcation, the pressure drop near the bifurcation area was very significant at high flow rate.

Cryogenic Single-Phase Heat Transfer in a Microscale Pin Fin Heat Sink

2013 ◽  
Author(s):  
Eric D. Truong ◽  
Erfan Rasouli ◽  
Vinod Narayanan
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Heat Sink ◽  
Single Phase ◽  
Flow Direction ◽  
Heat Sinks ◽  
Variable Cross ◽  
Transfer Coefficients ◽  
Pin Fin ◽  
Heat Transfer Coefficients

A combined experimental and computational fluid dynamics study of single-phase liquid nitrogen flow through a microscale pin-fin heat sink is presented. Such cryogenic heat sinks find use in applications such as high performance computing and spacecraft thermal management. A circular pin fin heat sink in diameter 5 cm and 250 micrometers in depth was studied herein. Unique features of the heat sink included its variable cross sectional area in the flow direction, variable pin diameters, as well as a circumferential distribution of fluid into the pin fin region. The stainless steel heat sink was fabricated using chemical etching and diffusion bonding. Experimental results indicate that the heat transfer coefficients were relatively unchanged around 2600 W/m2-K for flow rates ranging from 2–4 g/s while the pressure drop increased monotonically with the flow rate. None of the existing correlations in literature on cross flow over a tube bank or micro pin fin heat sinks were able to predict the experimental pressure drop and heat transfer characteristics. However, three dimensional simulations performed using ANSYS Fluent showed reasonable (∼7 percent difference) agreement in the average heat transfer coefficients between experiments and CFD simulations.

Sign in / Sign up

Export Citation Format

Share Document