Vestibular loss disrupts control of head and trunk on a sinusoidally moving platform

2002 ◽  
Vol 11 (6) ◽  
pp. 371-389 ◽  
Author(s):  
John J. Buchanan ◽  
Fay B. Horak
Keyword(s):  
Center Of Mass ◽  
Support Surface ◽  
Vestibular Loss ◽  
Trunk Motion ◽  
Bilateral Vestibular Loss ◽  
Somatosensory Information ◽  
Large Head ◽  
Space Pattern ◽  
And Control ◽  
Sinusoidal Surface

Twelve subjects, 6 bilateral vestibular-loss (3 well compensated and 3 poorly compensated) and 6 controls, attempted to maintain balance during anterior-posterior sinusoidal surface translation at 6 different frequencies. For frequencies ≤ 0.25 Hz well compensated and control subjects rode the platform by fixing the head and upper-trunk with respect to the support surface, and for frequencies ≥ 0.75 Hz, these subjects fixed their head/upper-trunk in space. Poorly compensated vestibular subjects showed large head and center of mass variability and were unable to balance at frequencies requiring a head fixed in space pattern. All vestibular subjects were less stable with vision than the controls. Without vision, vestibular subjects experienced more falls than the controls at all frequencies, with falls observed in 61% trials and 16% information is important in stabilizing head and upper-trunk motion in space. Visual and somatosensory information can compensate, in part, for vestibular-loss. The results are discussed in light of models that characterize postural control in a vestibular/visual top-down and somatosensory bottom-up manner.

The role of vestibular and somatosensory systems in intersegmental control of upright stance

2008 ◽  
Vol 18 (1) ◽  
pp. 39-49 ◽  
Author(s):  
Rob Creath ◽  
Tim Kiemel ◽  
Fay Horak ◽  
John J. Jeka
Keyword(s):  
Support Surface ◽  
Light Touch ◽  
Upright Stance ◽  
Rotating Platform ◽  
Vestibular Loss ◽  
Bilateral Vestibular Loss ◽  
Eyes Closed ◽  
Intersegmental Dynamics ◽  
Somatosensory Information ◽  
Leg Coordination

Upright stance was perturbed using sinusoidal platform rotations to see how vestibular and somatosensory information are used to control segment and intersegmental dynamics in subjects with bilateral vestibular loss (BVL) and healthy controls (C). Subjects stood with eyes closed on a rotating platform (±1.2° for frequencies ranging from 0.01–0.4 Hz in the presence and absence of light fingertip touch. Trunk movement relative to the platform of BVLs was higher than Cs at higher platform frequencies whereas leg movement relative to the platform was similar for both groups. With the addition of light touch, both groups showed similar trunk and leg segment movement relative to the platform. Trunk-leg coordination was in-phase for frequencies below 1 Hz and anti-phase above 1 Hz. Interestingly, BVLs showed evidence of a "legs-leading-trunk" relationship in the shift from in-phase to anti-phase around 1 Hz. Controls showed no preference for either segment to lead the coordinative shift from in- to anti-phase. The results suggest that the balance instability of BVL subjects stems from high variability of the trunk, rather than the legs. The high trunk variability may emerge from the "legs-leading" intersegmental relationship upon which BVLs rely. Because BVLs derive information about self-orientation primarily from the support surface when their eyes are closed, the legs initiate the shift to anti-phase trunk-leg coordination that is necessary for stable upright stance control. Higher trunk variability suggests that this strategy results in lower overall postural stability. Light touch substitutes for vestibular information, leading to lower trunk variability along with a trunk-leg phase shift similar to controls, without a preference for either segment to lead the shift. The results suggest that vestibulospinal control acts primarily to stabilize the trunk in space and to facilitate intersegmental dynamics.

Bilateral Vestibular Loss in Cats Leads to Active Destabilization of Balance During Pitch and Roll Rotations of the Support Surface

2007 ◽  
Vol 97 (6) ◽  
pp. 4357-4367 ◽  
Author(s):  
Jane M. Macpherson ◽  
Dirk G. Everaert ◽  
Paul J. Stapley ◽  
Lena H. Ting
Keyword(s):  
Center Of Mass ◽  
The Body ◽  
Support Surface ◽  
Postural Response ◽  
Vestibular Loss ◽  
Bilateral Vestibular Loss ◽  
Automatic Postural Response ◽  
Vestibular Information ◽  
Body Center ◽  
Proprioceptive Inputs

Although the balance difficulties accompanying vestibular loss are well known, the underlying cause remains unclear. We examined the role of vestibular inputs in the automatic postural response (APR) to pitch and roll rotations of the support surface in freely standing cats before and in the first week after bilateral labyrinthectomy. Support surface rotations accelerate the body center of mass toward the downhill side. The normal APR consists of inhibition in the extensors of the uphill limbs and excitation in the downhill limbs to decelerate the body and maintain the alignment of the limbs with respect to earth-vertical. After vestibular lesion, cats were unstable during rotation perturbations and actively pushed themselves downhill rather than uphill, using a postural response that was opposite to that seen in the control trials. The extensors of the uphill rather than downhill limbs were activated, whereas those of the downhill limbs were inhibited rather than being excited. We propose that vestibular inputs provide an important reference to earth-vertical, which is critical to computing the appropriate postural response during active orientation to the vertical. In the absence of this vestibular information, subjects orient to the support surface using proprioceptive inputs, which drives the body downhill resulting in instability and falling. This is consistent with current models of sensory integration for computation of body posture and orientation.

CARTESIAN APPROACH FOR GAIT PLANNING AND CONTROL OF BIPED ROBOTS ON IRREGULAR SURFACES

2009 ◽  
Vol 06 (04) ◽  
pp. 675-697 ◽  
Author(s):  
S. ALI A. MOOSAVIAN ◽  
MANSOOR ALGHOONEH ◽  
AMIR TAKHMAR
Keyword(s):  
Center Of Mass ◽  
Joint Space ◽  
Computational Effort ◽  
Simulation Studies ◽  
Pd Controller ◽  
Biped Robots ◽  
Gait Planning ◽  
Trunk Motion ◽  
Planning And Control ◽  
And Control

Biped robots possess higher capabilities than other mobile robots for moving on uneven environments. However, due to natural postural instability of these robots, their motion planning and control become a more important and challenging task. This article presents a Cartesian approach for gait planning and control of biped robots without the need to use the inverse kinematics and the joint space trajectories, thus the proposed approach could substantially reduce the processing time in both simulation studies and online implementations. It is based on constraining four main points of the robot in Cartesian space. This approach exploits the concept of Transpose Jacobian control as a virtual spring and damper between each of these points and the corresponding desired trajectory, which leads to overcome the redundancy problem. These four points include the tip of right and left foot, the hip joint, and the total center of mass (CM). Furthermore, in controlling biped robots based on desired trajectories in the task space, the system may track the desired trajectory while the knee is broken. This problem is solved here using a PD controller which will be called the Knee Stopper. Similarly, another PD controller is proposed as the Trunk Stopper to limit the trunk motion. Obtained simulation results show that the proposed Cartesian approach can be successfully used in tracking desired trajectories on various surfaces with lower computational effort.

Bilateral labyrinthectomy in the cat: effects on the postural response to translation

1995 ◽  
Vol 73 (3) ◽  
pp. 1181-1191 ◽  
Author(s):  
J. T. Inglis ◽  
J. M. Macpherson
Keyword(s):  
Visual Information ◽  
Center Of Mass ◽  
Afferent Input ◽  
Support Surface ◽  
Postural Response ◽  
Automatic Postural Response ◽  
Somatosensory Information ◽  
Postural Responses ◽  
Before And After ◽  
Evoked Activity

1. This study examined the role of vestibular afferent information on the postural responses of four cats, evoked by movements of the support surface during stance. Animals were exposed to linear translations of the supporting surface in eight evenly spaced directions in the horizontal plane, before and after bilateral labyrinthectomy. Postural responses were quantified in terms of the ground reaction forces under each paw and the evoked activity in selected muscles. 2. The cats were able to stand on the platform within 1-3 days after labyrinthectomy and were able to maintain balance during all perturbations of stance, even when they stood in total darkness, completely deprived of visual information. After lesion, postural responses were characterized by normal latency and normal spatial and temporal patterning of electromyographic (EMG) response. The pattern of force response showed the force constraint strategy that characterizes postural responses in the intact animal. 3. The only deficit in the postural response after lesion was a hypermetria, or active over-response that caused the animals to overbalance somewhat but did not impair their ability to remain upright. Analysis of the trajectory of the animal's center of mass during the trials indicated that the hypermetria was due to an abnormally large, active response on the part of the animal and could not be attributed to changes in the passive stiffness of the musculoskeletal system. The hypermetria was transient, and response amplitude returned to control levels after the rapid compensation phase of 10-15 days. 4. It is concluded that vestibular information is not essential for triggering the rapid, automatic postural response to translations of the support surface, nor is it necessary for the selection or shaping of the evoked response. Instead, somatosensory information appears to predominate in these postural adjustments. However, vestibular afferent input does influence the scaling of the postural response.

scholarly journals Vertical Jumping for Legged Robot Based on Quadratic Programming

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3679
Author(s):  
Dingkui Tian ◽  
Junyao Gao ◽  
Xuanyang Shi ◽  
Yizhou Lu ◽  
Chuzhao Liu
Keyword(s):  
Quadratic Programming ◽  
Stance Phase ◽  
Center Of Mass ◽  
Maximum Error ◽  
Legged Robot ◽  
Flight Phase ◽  
Programming Framework ◽  
Vertical Jumping ◽  
Control Schemes ◽  
And Control

The highly dynamic legged jumping motion is a challenging research topic because of the lack of established control schemes that handle over-constrained control objectives well in the stance phase, which are coupled and affect each other, and control robot’s posture in the flight phase, in which the robot is underactuated owing to the foot leaving the ground. This paper introduces an approach of realizing the cyclic vertical jumping motion of a planar simplified legged robot that formulates the jump problem within a quadratic-programming (QP)-based framework. Unlike prior works, which have added different weights in front of control tasks to express the relative hierarchy of tasks, in our framework, the hierarchical quadratic programming (HQP) control strategy is used to guarantee the strict prioritization of the center of mass (CoM) in the stance phase while split dynamic equations are incorporated into the unified quadratic-programming framework to restrict the robot’s posture to be near a desired constant value in the flight phase. The controller is tested in two simulation environments with and without the flight phase controller, the results validate the flight phase controller, with the HQP controller having a maximum error of the CoM in the x direction and y direction of 0.47 and 0.82 cm and thus enabling the strict prioritization of the CoM.

scholarly journals Turning Gait Planning Method for Humanoid Robots

2018 ◽  
Vol 8 (8) ◽  
pp. 1257 ◽  
Author(s):  
Tianqi Yang ◽  
Weimin Zhang ◽  
Xuechao Chen ◽  
Zhangguo Yu ◽  
Libo Meng ◽  
...  
Keyword(s):  
Inverted Pendulum ◽  
Center Of Mass ◽  
Translational Motion ◽  
Humanoid Robots ◽  
Inverted Pendulum Model ◽  
Straight Line ◽  
Pendulum Model ◽  
The Stability ◽  
And Control ◽  
Present Simulation

The most important feature of this paper is to transform the complex motion of robot turning into a simple translational motion, thus simplifying the dynamic model. Compared with the method that generates a center of mass (COM) trajectory directly by the inverted pendulum model, this method is more precise. The non-inertial reference is introduced in the turning walk. This method can translate the turning walk into a straight-line walk when the inertial forces act on the robot. The dynamics of the robot model, called linear inverted pendulum (LIP), are changed and improved dynamics are derived to make them apply to the turning walk model. Then, we expend the new LIP model and control the zero moment point (ZMP) to guarantee the stability of the unstable parts of this model in order to generate a stable COM trajectory. We present simulation results for the improved LIP dynamics and verify the stability of the robot turning.

scholarly journals Vibrotactile feedback improves balance and mobility in patients with severe bilateral vestibular loss

2018 ◽  
Vol 266 (S1) ◽  
pp. 19-26 ◽  
Author(s):  
Herman Kingma ◽  
Lilian Felipe ◽  
Marie-Cecile Gerards ◽  
Peter Gerits ◽  
Nils Guinand ◽  
...  
Keyword(s):  
Vibrotactile Feedback ◽  
Vestibular Loss ◽  
Bilateral Vestibular Loss

scholarly journals Three-axis air-bearing based platform for small satellite attitude determination and control simulation

2005 ◽  
Vol 3 (03) ◽  
Author(s):  
J. Prado ◽  
G. Bisiacchi ◽  
L. Reyes ◽  
E. Vicente ◽  
F. Contreras ◽  
...  
Keyword(s):  
Attitude Control ◽  
Attitude Determination ◽  
Center Of Mass ◽  
Measurement Unit ◽  
Simulation Platform ◽  
Air Bearing ◽  
Small Satellites ◽  
Main Components ◽  
Free Environment ◽  
And Control

A frictionless environment simulation platform, utilized for accomplishing three-axis attitude control tests in small satellites, is introduced. It is employed to develop, improve, and carry out objective tests of sensors, actuators, and algorithms in the experimental framework. Different sensors (i.e. sun, earth, magnetometer, and an inertial measurement unit) are utilized to assess three-axis deviations. A set of three inertial wheels is used as primary actuators for attitude control, together with three mutually perpendicular magnetic coils intended for desaturation purposes, and as a backup control system. Accurate balancing, through the platform’s center of mass relocation into the geometrical center of the spherical air-bearing, significatively reduces gravitational torques, generating a virtually torque-free environment. A very practical balancing procedure was developed for equilibrating the table in the local horizontal plane, with a reduced final residual torque. A wireless monitoring system was developed for on-line and post-processing analysis; attitude data are displayed and stored, allowing properly evaluate the sensors, actuators, and algorithms. A specifically designed onboard computer and a set of microcontrollers are used to carry out attitude determination and control tasks in a distributed control scheme. The main components and subsystems of the simulation platform are described in detail.

Sign in / Sign up

Export Citation Format

Share Document