scholarly journals Turning Gait Planning Method for Humanoid Robots

2018 ◽  
Vol 8 (8) ◽  
pp. 1257 ◽  
Author(s):  
Tianqi Yang ◽  
Weimin Zhang ◽  
Xuechao Chen ◽  
Zhangguo Yu ◽  
Libo Meng ◽  
...  
Keyword(s):  
Inverted Pendulum ◽  
Center Of Mass ◽  
Translational Motion ◽  
Humanoid Robots ◽  
Inverted Pendulum Model ◽  
Straight Line ◽  
Pendulum Model ◽  
The Stability ◽  
And Control ◽  
Present Simulation

The most important feature of this paper is to transform the complex motion of robot turning into a simple translational motion, thus simplifying the dynamic model. Compared with the method that generates a center of mass (COM) trajectory directly by the inverted pendulum model, this method is more precise. The non-inertial reference is introduced in the turning walk. This method can translate the turning walk into a straight-line walk when the inertial forces act on the robot. The dynamics of the robot model, called linear inverted pendulum (LIP), are changed and improved dynamics are derived to make them apply to the turning walk model. Then, we expend the new LIP model and control the zero moment point (ZMP) to guarantee the stability of the unstable parts of this model in order to generate a stable COM trajectory. We present simulation results for the improved LIP dynamics and verify the stability of the robot turning.

Stabilized Walking of Humanoid NAO using Enhanced Spring-Loaded Inverted Pendulum Model on Uneven Terrain

2022 ◽  
Vol 13 (1) ◽  
pp. 0-0
Keyword(s):  
Path Length ◽  
Inverted Pendulum ◽  
Center Of Mass ◽  
Humanoid Robots ◽  
Slip Model ◽  
Turning Angle ◽  
Uneven Terrain ◽  
Inverted Pendulum Model ◽  
Pendulum Model ◽  
Spring Loaded Inverted Pendulum

In the coming decades, humanoid robots will play a rising role in society. The present article discusses their walking control and obstacle avoidance on uneven terrain using enhanced spring-loaded inverted pendulum model (ESLIP). The SLIP model is enhanced by tuning it with an adaptive particle swarm optimization (APSO) approach. It helps the humanoid robot to reach closer to the obstacles in order to optimize the turning angle to optimize the path length. The desired trajectory, along with the sensory data, is provided to the SLIP model, which creates compatible COM (center of mass) dynamics for stable walking. This output is fed to APSO as input, which adjusts the placement of the foot during interaction with uneven surfaces and obstacles. It provides an optimum turning angle for shunning the obstacles and ensures the shortest path length. Simulation has been carried out in a 3D simulator based on the proposed controller and SLIP controller in uneven terrain.

Dynamic and Reactive Walking for Humanoid Robots Based on Foot Placement Control

2016 ◽  
Vol 13 (02) ◽  
pp. 1550041 ◽  
Author(s):  
Juan Alejandro Castano ◽  
Zhibin Li ◽  
Chengxu Zhou ◽  
Nikos Tsagarakis ◽  
Darwin Caldwell
Keyword(s):  
Center Of Mass ◽  
Humanoid Robots ◽  
Gait Pattern ◽  
Gait Patterns ◽  
Foot Placement ◽  
Inverted Pendulum Model ◽  
Gait Parameters ◽  
Pendulum Model ◽  
Single Mass ◽  
Walking Velocity

This paper presents a novel online walking control that replans the gait pattern based on our proposed foot placement control using the actual center of mass (COM) state feedback. The analytic solution of foot placement is formulated based on the linear inverted pendulum model (LIPM) to recover the walking velocity and to reject external disturbances. The foot placement control predicts where and when to place the foothold in order to modulate the gait given the desired gait parameters. The zero moment point (ZMP) references and foot trajectories are replanned online according to the updated foothold prediction. Hence, only desired gait parameters are required instead of predefined or fixed gait patterns. Given the new ZMP references, the extended prediction self-adaptive control (EPSAC) approach to model predictive control (MPC) is used to minimize the ZMP response errors considering the acceleration constraints. Furthermore, to ensure smooth gait transitions, the conditions for the gait initiation and termination are also presented. The effectiveness of the presented gait control is validated by extensive disturbance rejection studies ranging from single mass simulation to a full body humanoid robot COMAN in a physics based simulator. The versatility is demonstrated by the control of reactive gaits as well as reactive stepping from standing posture. We present the data of the applied disturbances, the prediction of sagittal/lateral foot placements, the replanning of the foot/ZMP trajectories, and the COM responses.

scholarly journals Effect of reduced gravity on the preferred walk-run transition speed.

1997 ◽  
Vol 200 (4) ◽  
pp. 821-826 ◽  
Author(s):  
R Kram ◽  
A Domingo ◽  
D P Ferris
Keyword(s):  
Froude Number ◽  
Inverted Pendulum ◽  
Center Of Mass ◽  
Reduced Gravity ◽  
Leg Length ◽  
Pendulum System ◽  
Transition Speed ◽  
Inverted Pendulum Model ◽  
Inverted Pendulum System ◽  
Pendulum Model

We investigated the effect of reduced gravity on the human walk-run gait transition speed and interpreted the results using an inverted-pendulum mechanical model. We simulated reduced gravity using an apparatus that applied a nearly constant upward force at the center of mass, and the subjects walked and ran on a motorized treadmill. In the inverted pendulum model for walking, gravity provides the centripetal force needed to keep the pendulum in contact with the ground. The ratio of the centripetal and gravitational forces (mv2/L)/(mg) reduces to the dimensionless Froude number (v2/gL). Applying this model to a walking human, m is body mass, v is forward velocity, L is leg length and g is gravity. In normal gravity, humans and other bipeds with different leg lengths all choose to switch from a walk to a run at different absolute speeds but at approximately the same Froude number (0.5). We found that, at lower levels of gravity, the walk-run transition occurred at progressively slower absolute speeds but at approximately the same Froude number. This supports the hypothesis that the walk-run transition is triggered by the dynamics of an inverted-pendulum system.

Parameterized gait pattern generator based on linear inverted pendulum model with natural ZMP references

2016 ◽  
Vol 32 ◽  
Author(s):  
Ya-Fang Ho ◽  
Tzuu-Hseng S. Li ◽  
Ping-Huan Kuo ◽  
Yan-Ting Ye
Keyword(s):  
Inverted Pendulum ◽  
Center Of Mass ◽  
Gait Pattern ◽  
Gait Patterns ◽  
Gait Planning ◽  
Inverted Pendulum Model ◽  
Pendulum Model ◽  
Lateral Plane ◽  
Planning Algorithm ◽  
Zero Moment

AbstractThis paper presents a parameterized gait generator based on linear inverted pendulum model (LIPM) theory, which allows users to generate a natural gait pattern with desired step sizes. Five types of zero moment point (ZMP) components are proposed for formulating a natural ZMP reference, where ZMP moves continuously during single support phases instead of staying at a fixed point in the sagittal and lateral plane. The corresponding center of mass (CoM) trajectories for these components are derived by LIPM theory. To generate a parameterized gait pattern with user-defined parameters, a gait planning algorithm is proposed, which determines related coefficients and boundary conditions of the CoM trajectory for each step. The proposed parameterized gait generator also provides a concept for users to generate gait patterns with self-defined ZMP references by using different components. Finally, the feasibility of the proposed method is validated by the experimental results with a teen-sized humanoid robot, David, which won first place in the sprint event at the 20th Federation of International Robot-soccer Association (FIRA) RoboWorld Cup.

Motion Planning for Humanoid Robots in Complex Environments Based on Stance Sequence and ZMP Reference

2012 ◽  
Vol 197 ◽  
pp. 415-422 ◽  
Author(s):  
Hong Liu ◽  
Qing Sun
Keyword(s):  
Humanoid Robot ◽  
Inverted Pendulum ◽  
Humanoid Robots ◽  
Pattern Generator ◽  
Complex Environments ◽  
Inverted Pendulum Model ◽  
Walking Pattern ◽  
Pendulum Model ◽  
Novel Method ◽  
Zero Moment

It is a great challenge to plan motion for humanoid robots in complex environments especially when the terrain is cluttered and discrete. To address this problem, a novel method is proposed in this paper by planning the gait according to the stance sequence and ZMP (Zero Moment Point) reference. It consists of two components: an adaptive footstep planner and a walking pattern generator. The adaptive footstep planner can generate the stance path according to the walking rules and adjust the orientation of body relevantly. As the footstep locations are determined, Linear Inverted Pendulum Model (LIPM) is used to generate the walking pattern with a moving ZMP reference. As demonstrated in experiments on the humanoid robot HOAP-2, our method can successfully plan footstep trajectories as well as generate the stable and natural-looking gait in typical cluttered and discrete environments.

A Control Method of Four-Legged Robot Stable Walking with Diagonal Gait

2011 ◽  
Vol 148-149 ◽  
pp. 82-87
Author(s):  
Chang Hua Fan ◽  
Zhen Jiang ◽  
Bai Yu He
Keyword(s):  
Dynamic Equation ◽  
Stability Problem ◽  
Inverted Pendulum ◽  
Control Method ◽  
Flip Angle ◽  
Legged Robot ◽  
Motion Stability ◽  
Inverted Pendulum Model ◽  
Pendulum Model ◽  
The Stability

This paper proposes a kind of control method used to solve the stability problem of the trotted robot. Propose the concept of inside flip design four-footed robot and build a double inverted pendulum model. Establish dynamic equation to analyze the factors of affecting the motion stability. During walking, the center of gravity can maintain a proper vibration and have a maximum safety region of flip angle. Finally, use Adams to verify the control method.

Sign in / Sign up

Export Citation Format

Share Document