scholarly journals Experimental Research on the Instantaneous and Long-Term Deflections of Pre-Cracked Concrete Beams Enhanced by Carbon Fibre Reinforced Polymer

2018 ◽  
Vol 12 (46) ◽  
pp. 275-284
Author(s):  
Shiyong Jiang ◽  
Tao Cai ◽  
Shijuan Wu ◽  
Weilai Yao
Keyword(s):  
Carbon Fibre ◽  
Experimental Research ◽  
Concrete Beams ◽  
Cracked Concrete ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer

Behaviour of reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates subjected to corrosion damage

2000 ◽  
Vol 27 (5) ◽  
pp. 1005-1010 ◽  
Author(s):  
Khaled A Soudki ◽  
Ted G Sherwood
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fibre ◽  
Concrete Beams ◽  
Corrosion Damage ◽  
Corrosion Process ◽  
Reinforced Concrete Beams ◽  
Cfrp Laminates ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer

The viability of carbon fibre reinforced polymer (CFRP) laminates for the strengthening of corrosion damaged reinforced concrete bridge girders is addressed in this paper. Ten reinforced concrete beams (100 × 150 × 1200 mm) with variable chloride levels (0-3%) were constructed. Six beams were strengthened by externally epoxy bonding CFRP laminates to the concrete surface. The tensile reinforcements of three unstrengthened and four strengthened specimens were subjected to accelerated corrosion by means of impressed current to 5, 10, and 15% mass loss. Strain gauges were placed on the CFRP laminates to monitor and quantify tensile strains induced by the corrosion process. Following the corrosion phase, the specimens were tested in flexure in a four-point bending regime. Test results revealed that CFRP laminates successfully confined the corrosion cracking, and the total expansion of the laminate exhibited an exponential increase throughout the corrosion process. All the strengthened beams exhibited increased stiffness over the unstrengthened specimens and marked increases in the yield and ultimate strength. The CFRP strengthening scheme was able to restore the capacity of corrosion damaged concrete beams up to 15% mass loss.Key words: CFRP laminates, corrosion, confinement, expansion, load tests, strengthening, bond strength, reinforced concrete.

Flexural behaviour of concrete beams strengthened with prestressed carbon fibre reinforced polymer sheets subjected to sustained loading and low temperature

2004 ◽  
Vol 31 (2) ◽  
pp. 239-252 ◽  
Author(s):  
Raafat El-Hacha ◽  
Mark F Green ◽  
R Gordon Wight
Keyword(s):  
Low Temperature ◽  
Carbon Fibre ◽  
Flexural Behaviour ◽  
Prestress Losses ◽  
Cfrp Sheets ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Prestressed Cfrp Sheets

This paper presents results of an experimental investigation that examined concrete beams post-tensioned with bonded carbon fibre reinforced polymer (CFRP) sheets and then exposed to either room (+22 °C) or low (-28 °C) temperatures. The primary objective of this investigation was to assess the flexural behaviour of the strengthened beams after sustained loadings at both room and low temperatures. The strengthened beams showed significant increases in flexural stiffness and ultimate capacity as compared with the control-unstrengthened beams. Failure of the strengthened beams was by tensile rupture of the prestressed CFRP sheets. Test results showed that the long-term and low temperature effects did not adversely affect the strength of the beams. Long-term loading and low temperature exposure caused prestress losses in the CFRP sheets. The load–deflection behaviour of the long-term beams was predicted accurately by an analytical model. These results suggest that bonded prestressed CFRP sheets could be used to increase the strength of damaged prestressed concrete girders under extreme environmental conditions.Key words: strengthening, anchorage, low temperature, long-term, prestress losses, sustained load, carbon fibre reinforced polymer sheet.

Impact resonance method for fatigue damage detection in reinforced concrete beams with carbon fibre reinforced polymer

2005 ◽  
Vol 32 (6) ◽  
pp. 1093-1102 ◽  
Author(s):  
Catalin Gheorghiu ◽  
Jamal Eddine Rhazi ◽  
Pierre Labossière
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fibre ◽  
Fatigue Damage ◽  
Concrete Beams ◽  
Resonance Method ◽  
Rc Beams ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Impact Resonance

This paper reports on the potential of using the impact resonance method (IRM) for detecting fatigue damage in strengthened reinforced concrete (RC) beams. In this experimental program, 1.2 m long RC beams strengthened with a carbon fibre reinforced polymer (CFRP) plate have been employed. The specimens were subjected to fatigue loading under four-point bending for up to 2 × 106 cycles at 3 Hz. The load amplitude was varying from 15% to 75% of the cycles yielding load of the beam. Throughout fatigue testing, the cycling was stopped for IRM measurements to be taken. The obtained data provided information about changes in modal properties, such as, fundamental frequencies and damping ratios. Moreover, the results have shown that the IRM technique was successfully employed in laboratory for detecting fatigue damage in concrete beams strengthened with CFRP laminates.Key words: impact resonance method, modal properties, RC beam, FRP-strengthening, fatigue test, cracking.

scholarly journals Behaviour of Reinforced Concrete Beams Bonded with Glass Fibre Reinforced Polymer and Carbon Fibre Reinforced Polymer Sheets

2020 ◽  
Vol 9 (3) ◽  
pp. 134-138
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fibre ◽  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
Fiber Reinforced ◽  
Cfrp Sheets ◽  
Reinforced Polymer ◽  
Externally Bonded ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer

Concrete, a mixture of different aggregates bonded with cement, first developed around 150BC in Rome has been bedrock to the modern Infrastructure. It is used to build everything from roads, bridges, dams to sky scrapers. Strengthening concrete is traditionally done by using steels but the developments in technology in recent decades allowed to use fiber reinforced plastics which are externally bonded to concrete . Such composite materials offer high strength, low weight, corrosion resistance, high fatigue resistance, easy and rapid installation and minimal change in structural geometry. This study investigates the behavior of reinforced concrete beams bonded with fiber composites. A numerical study is conducted to study the behavior of RC beam under Static third point loading. Concrete beam specimens with dimensions of 150 mm width, 300 mm height, and 2600 mm length are modelled. These beams are externally bonded with Glass Fiber Reinforced Polymer (GFRP) sheets and Carbon Fibre Reinforced Polymer (CFRP) sheets. In present study, we examine the performance of reinforced concrete beams which are bonded with GFRP and CFRP sheets with various thicknesses (1, 2 & 3 mm) using ABAQUS in terms of failure modes, enhancement of load capacity, load-deflection analysis and flexural behaviour

Sign in / Sign up

Export Citation Format

Share Document