scholarly journals A Stochastic Visualization Technique for Noisy 3D Unsteady Flow-Direction Data

2017 ◽  
Vol 37 (10) ◽  
pp. 48-54
Author(s):  
Noriyasu OMATA ◽  
Susumu SHIRAYAMA
1970 ◽  
Vol 92 (1) ◽  
pp. 65-71 ◽  
Author(s):  
E. Lennemann ◽  
J. H. G. Howard

The phenomena of unsteady relative flow observed in a centrifugal impeller passage running at part capacity and zero flow are discussed. The mechanisms of passage stall for a shrouded and unshrouded impeller are investigated and a qualitative correlation is developed for the influence of secondary flow and inducer flow on the passage stall. The hydrogen bubble flow visualization technique is extended to higher velocities and rotating systems and provides the method for obtaining the experimental results.


2000 ◽  
Author(s):  
B. V. Rathish Kumar ◽  
T. Yamaguchi ◽  
H. Liu ◽  
R. Himeno

Abstract Unsteady flow dynamics in a doubly constricted vessel is analyzed by using a time accurate Finite Volume solution of three dimensional incompressible Navier-Stokes equations. Computational experiments are carried out for various values of Reynolds number in order to assess the criticality of multiple mild constrictions in series and also to bring out the subtle 3D features like vortex formation. Studies reveal that pressure drop across a series of mild constrictions can get physiologically critical. Further this pressure drop is found to be sensitive to the spacing between the constrictions and also to the oscillatory nature of the inflow profile.


Author(s):  
Stephen J. Wilkins ◽  
Joseph W. Hall

The unsteady flow field produced by a tandem cylinder system with the upstream cylinder yawed to the mean flow direction is investigated for upstream cylinder yaw angles from α = 60° to α = 90°. Multi-point fluctuating surface pressure and hotwire measurements were conducted at various spanwise positions on both the upstream and downstream cylinders. The results indicate that yawing the front cylinder to the mean flow direction causes the pressure and velocity spectra on the upstream and downstream cylinders to become more broadband than for a regular tandem cylinder system, and reduces the magnitude of the peak associated with the vortex-shedding. However, span-wise correlation and coherence measurements indicate that the vortex-shedding is still present and was being obscured by the enhanced three-dimensionality that the upstream yawed cylinder caused and was still present and correlated from front to back, at least for the larger yaw angles investigated. When the cylinder was yawed to α = 60°, the pressure fluctuations became extremely broadband and exhibited shorter spanwise correlation.


Author(s):  
M. Younsi ◽  
F. Bakir ◽  
S. Kouidri ◽  
R. Rey

The objective of this paper is the study and the analysis of the complex phenomena related to the internal flow in a centrifugal fan, using Computational Fluid Dynamics (CFD) tools, completed with experimental investigation in order to validate the used numerical models. The CFD analysis concerns 2D and 3D unsteady flow. The studied phenomena are the interactions and unsteadiness induced by the motion of the rotating blades relatively to the volute and their impact on the aeroacoustic behavior of the fan. Thus, 3D and 2D unsteady calculations using Unsteady Reynolds Averaged Navier Stokes (URANS) approach has been applied on a hybrid mesh grid whose refinement has been studied and adapted to the flow morphology. Turbulence has been modeled with the k-ω-Shear Stress Model (SST) model. The computational domain has been divided into two zones, a rotating zone including the impeller and stationary zone including the volute. A sliding mesh technique has been applied to the interfaces in order to allow the unsteady interactions between the two zones. The overall performances predicted by the computations have been validated at different flow rate. For each geometry modeling (2D and 3D), the unsteady part of the study is illustrated by analyzing the pressure fluctuations on different points from the lateral surface of the volute. The analysis of the wake generated by the rotation of the blower shows that the volute tongue is the main zone of unsteadiness and flow perturbations. In order to predict the acoustic pressures, the unsteady flow field variables provided by the CFD calculations have been used as inputs in the Ffowks Williams-Hawkings equations.


Author(s):  
Jose M. Luna ◽  
Ricardo Romero-Mendez ◽  
Abel Hernandez-Guerrero ◽  
Jose C. Rubio-Arana

The flow structures in the cavities of parallel cross-corrugated surfaces, also called chevron geometry, are investigated in this work using an experimental visualization method. An angle of 45° between the corrugations and the main flow direction has been considered. Reviews show that a considerable amount of investigations, mainly experimental, of heat transfer and pressure drop for cross-corrugated plates has been performed, whereas for the flow field in the cavities has only been investigated numerically. The flow visualization experiments are performed inside a water tunnel using a wide range of the hydraulic diameter-based Reynolds number.


2020 ◽  
Vol 15 ◽  
pp. 1-8 ◽  
Author(s):  
Nalimela Pothanna ◽  
P. Aparna

In this paper, the unsteady flow of a fluid of finite depth with an oscillating bottom is examined. The flow is assumed in the absence of viscous dissipation. The governing equations of the flow are decoupled in the velocity and temperature fields. The velocity and temperature fields have been obtained analytically. The effects of various material parameters on these fields have been discussed with the help of graphical illustrations. It is noticed that the upward thrust (ρfy) vanishes when Reiner Rivlin coefficient of viscosity (μc) is zero and the transverse force (ρfz) perpendicular to the flow direction vanishes for thermo-viscosity coefficient (α8) is zero. The external forces generated perpendicular to the flow direction is a special feature of thermo-viscous fluid when compared to the other type of fluids.


2003 ◽  
Vol 81 (5) ◽  
pp. 789-795 ◽  
Author(s):  
H A Attia

In this paper, the unsteady flow of a dusty viscous incompressible electrically conducting non-Newtonian power-law fluid through a circular pipe is investigated. A constant pressure gradient in the axial direction and a uniform magnetic field directed perpendicular to the flow direction are applied. The particle phase is assumed to behave as a viscous fluid. A numerical solution is obtained for the governing nonlinear momentum equations using finite differences. The effects of the magnetic-field parameter Ha, the non-Newtonian fluid characteristics (the flow index n), and the particle-phase viscosity β on the transient behavior of the velocity, volumetric flow rates, and skin friction coefficients of both fluid and particle phases are studied. It is found that all the flow parameters for both phases decrease as the magnetic field increases or the flow index decreases. On the other hand, increasing the particle-phase viscosity increases the skin friction of the particle phase, but decreases the other flow parameters. PACS No.: 47.50.+d


Sign in / Sign up

Export Citation Format

Share Document