Effects of solution treatment on mechanical properties and corrosion resistance of 4A duplex stainless steel

2018 ◽  
Vol 109 (2) ◽  
pp. 136-146 ◽  
Author(s):  
Panpan Lu ◽  
Aiqin Wang ◽  
Jingpei Xie ◽  
Wenyan Wang
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Solution Treatment ◽  
Mechanical Properties And Corrosion

Investigation on mechanical, corrosion resistance and antibacterial properties of Cu-bearing 2205 duplex stainless steel by solution treatment

RSC Advances ◽  
2016 ◽  
Vol 6 (114) ◽  
pp. 112738-112747 ◽  
Author(s):  
Jinlong Zhao ◽  
Chunguang Yang ◽  
Dawei Zhang ◽  
Ying Zhao ◽  
M. Saleem Khan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Antibacterial Properties ◽  
Solution Treatment ◽  
2205 Duplex Stainless Steel ◽  
Antibacterial Performance ◽  
Solution Treated ◽  
Mechanical Properties And Corrosion

Solution treated 2205-Cu DSS with strong antibacterial performance against M. salsuginis showed appropriate mechanical properties and corrosion resistance.

scholarly journals The Microstructure, Mechanical Properties, and Corrosion Resistance of UNS S32707 Hyper-Duplex Stainless Steel Processed by Selective Laser Melting

Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1012 ◽  
Author(s):  
Feng Shang ◽  
Xiaoqiu Chen ◽  
Zhiyong Wang ◽  
Zuchun Ji ◽  
Fei Ming ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Selective Laser Melting ◽  
Solution Annealing ◽  
Ocean Engineering ◽  
Laser Melting ◽  
Complex Shapes ◽  
Mechanical Properties And Corrosion

UNS S32707 hyper-duplex stainless steel (HDSS) parts with complex shapes for ocean engineering were prepared by selective laser melting (SLM) process. In the process of SLM, the balance between austenite and ferrite was undermined due to the high melting temperature and rapid cooling rate, resulting in poor ductility and toughness. The solution annealing was carried out with various temperatures (1050–1200 °C) for one hour at a time. The evolution of microstructures, mechanical properties, and corrosion resistance of UNS S32707 samples prepared by SLM was comprehensively investigated. The results indicate that a decrease in nitrogen content during the SLM process reduced the content of austenite, and a nearly balanced microstructure was obtained after appropriate solution annealing. The ratio between ferrite and austenite was approximately 59.5:40.5. The samples with solution treated at 1150 °C and 1100 °C exhibited better comprehensive mechanical properties and pitting resistance, respectively.

scholarly journals Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2468 ◽  
Author(s):  
Papula ◽  
Song ◽  
Pateras ◽  
Chen ◽  
Brandt ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Selective Laser Melting ◽  
Crystallographic Texture ◽  
Post Processing ◽  
Laser Melting ◽  
Mechanical Properties And Corrosion

Additive manufacturing (AM) is a rapidly growing field of technology. In order to increase the variety of metal alloys applicable for AM, selective laser melting (SLM) of duplex stainless steel 2205 powder and the resulting microstructure, density, mechanical properties, and corrosion resistance were investigated. An optimal set of processing parameters for producing high density (>99.9%) material was established. Various post-processing heat treatments were applied on the as-built predominantly ferritic material to achieve the desired dual-phase microstructure. Effects of annealing at temperatures of 950 °C, 1000 °C, 1050 °C, and 1100 °C on microstructure, crystallographic texture, and phase balance were examined. As a result of annealing, 40–46 vol.% of austenite phase was formed. Annealing decreased the high yield and tensile strength values of the as-built material, but significantly increased the ductility. Annealing also decreased the residual stresses in the material. Mechanical properties of the SLM-processed and heat-treated materials outperformed those of conventionally produced alloy counterparts. Using a scanning strategy with 66° rotation between layers decreased the strength of the crystallographic texture. Electrochemical cyclic potentiodynamic polarization testing in 0.6 M NaCl solution at room temperature showed that the heat treatment improved the pitting corrosion resistance of the as-built SLM-processed material.

Effects of the Welding Process on Mechanical Properties and Corrosion Resistance of 2205 Duplex Stainless Steel

2011 ◽  
Vol 189-193 ◽  
pp. 1212-1217 ◽  
Author(s):  
Lian Zheng Ding ◽  
Qing Sen Meng ◽  
Zhong Wei Yang ◽  
Gang Wang
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Duplex Stainless Steel ◽  
Solution Treatment ◽  
Inert Gas ◽  
2205 Duplex Stainless Steel ◽  
Solid Solution Treatment ◽  
Welding Processes

In this study, welding of 2205 duplex stainless steel was carried out by first using plasma arc welding as root welding and then using tungsten inert-gas (TIG) welding and metal inert-gas (MIG) welding respectively as cover welding, Weldability of 2205 duplex stainless steel using two different the welding processes is investigated. Microstructure characteristics, mechanical properties, pitting corrosion resistance are made comparison between the weldment that is solution treated and that is not .Influence of heat input and the solid solution treatment on complex properties of welded joints is evaluated, and the solid solution treatment was conducted for both of the welded joints fabricated by the welding processes mentioned preciously.

Microstructural Evolutions and its Influence on Properties of Super-Duplex Stainless Steel

2010 ◽  
Vol 97-101 ◽  
pp. 656-659 ◽  
Author(s):  
Ying Han ◽  
De Ning Zou ◽  
Hong Hong Yao ◽  
Wei Zhang ◽  
Jun Hui Yu
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Energy Spectrum ◽  
Duplex Stainless Steel ◽  
Aging Time ◽  
Aging Temperature ◽  
Super Duplex Stainless Steel ◽  
Σ Phase ◽  
Mechanical Properties And Corrosion

Color-optical microscopy, energy spectrum analysis, hardness measuring, tensile and corrosion testing were conducted to investigate characteristics of microstructure, mechanical properties and corrosion resistance of S32750 super-duplex stainless steel aged at 850～920°C. The results indicate that with the increase of aging temperature and aging time the content of σ phase increases, while the ferrite content decreases. The forming and growing of σ phase obtained during aging causes an increase in hardness and a reduction in ductility of the aged steel. Moreover, increasing aging time the corrosion resistance reduces, owing to a new formed austenite occurs.

Sign in / Sign up

Export Citation Format

Share Document