scholarly journals Seasonal and year dynamics in the quality characteristics in pig carcasses

2016 ◽  
Vol 32 (4) ◽  
pp. 341-352 ◽  
Author(s):  
Jivko Nakev ◽  
Teodora Popova ◽  
Maya Ignatova ◽  
Penka Marinova ◽  
Tania Nikolova
Keyword(s):  
Carcass Characteristics ◽  
Quality Characteristics ◽  
Commercial Production ◽  
The Other ◽  
Carcass Weight ◽  
Longissimus Dorsi ◽  
Finishing Pigs ◽  
Lean Meat ◽  
Fat Thickness ◽  
Pig Carcasses

The aim of our study was to assess the dynamics of the characteristics in pig carcasses as affected by the season and year of slaughter. A total of 106 027 carcasses of growing-finishing pigs of commercial production, slaughtered in the same abattoir in 2014 and 2015 were included in the study. The carcasses were classified using UltraFOM 200 device, as the characteristics controlled were back-fat thickness at two locations and the depth of m. Longissimus dorsi. These measurements were used to further determine the lean meat percentage. The results of the study showed significant differences in the dynamics of changes of carcass characteristics during the seasons and the years. The highest lean meat percentage was found in summer (56.48%), followed by spring (56.34%), autumn (56.29%) and winter (56.10%). On the other hand, the pigs slaughtered in winter displayed highest carcass weight and back-fat thickness at both locations.

Growth and carcass characteristics of crossbred and straightbred Hereford steers. II. Carcass measurements and composition

1981 ◽  
Vol 32 (1) ◽  
pp. 171 ◽  
Author(s):  
JM Thompson ◽  
R Barlow
Keyword(s):  
Subcutaneous Fat ◽  
Carcass Characteristics ◽  
Allometric Equation ◽  
The Body ◽  
The Other ◽  
Carcass Weight ◽  
Muscle Area ◽  
Eye Muscle ◽  
Fat Thickness ◽  
Breed Crosses

The effect of sire breed on the growth and development of carcass characteristics was examined in 104 steer carcasses, over the weight range of c. 300 to 600 kg liveweight. The carcasses were obtained from 28 straightbred Hereford, 27 Brahman x Hereford, 23 Simmental x Hereford and 26 Friesian x Hereford steers, which were grown on pasture and slaughtered in four groups when the Herefords weighed c. 270, 370, 470 and 570 kg liveweight. Changes in carcass characteristics with weight were examined by using the linear form of the allometric equation (log10Y = log10A+blog10X). As liveweight increased, the proportion of carcass in the body increased (b = 1.152). At the same liveweight, Brahman cross steers had heavier carcasses than the Hereford steers, which were heavier than either the Simmental or Friesian cross steers (P < 0.05). Fat thickness at the 12th-13th rib site, and kidney and channel fat weight both increased at a proportionally faster rate than carcass weight (b = 1.511 and 1 567 respectively). At the same carcass weight, Hereford and Brahman cross carcasses had a greater fat thickness than Simmental and Friesian cross carcasses (P i 0.05). Differences between sire breeds in kidney and channel fat weight were not significant (P > 0.05). C:rcass length and eye muscle area increased at a proportionally slower rate than carcass weight (b = 0.268 and 0.466 respectively). At the same carcass weight, Friesian cross carcasses were longer, and Simmental cross carcasses had a larger eye muscle area than the other breed crosses (P < 0.05). As total side weight increased, the proportions of subcutaneous and intermuscular fatAincreased (b = 1.554 and 1.535 respectively), and the proportions of muscle and bone decreased (b = 0.938 and 0.676 respectively). At the same side weight, the Hereford and Brahman cross carcasses had more subcutaneous fat than the Simmental and Friesian cross carcasses (P < 0.05). The Hereford carcasses had more intermuscular fat than the Simmental cross carcasses, which had more muscle than the other breed crosses (P < 0.05). Friesian cross carcasses had more bone than the Simmental crosses, with Brahman cross and Hereford carcasses having the least bone (P < 0.05). Brahman cross carcasses had a higher conformation score than the Simmental cross and Hereford carcasses, the Friesian cross carcasses having the lowest (P < 0.05). Samples of the M. longissimus from Brahman cross carcasses had a higher Warner-Bratzler shear force than samples from the other breed crosses (P < 0.05).

SLAUGHTER AND CARCASS CHARACTERISTICS OF CATTALO, HEREFORD, AND 1/4 BRAHMAN–3/4 HEREFORD YEARLINGS

1977 ◽  
Vol 57 (4) ◽  
pp. 689-695
Author(s):  
J. E. LAWSON ◽  
D. G. KELLER ◽  
H. F. PETERS
Keyword(s):  
Growth Rate ◽  
Carcass Characteristics ◽  
Carcass Weight ◽  
Longissimus Dorsi ◽  
Fat Thickness ◽  
The Difference

Slaughter and carcass data were obtained from 60 cattalo that averaged 1/7 bison–6/7 domestic (27 bulls, 33 heifers), 19 Hereford (11 bulls, 8 heifers), and 17 1/4 Brahman–3/4 Hereford (12 bulls, 5 heifers) yearlings. At a constant age, 1/4 Brahman and Hereford exceeded cattalo in growth rate, i.e. slaughter weights were: 1/4 Brahman 381 ± 10 kg, Hereford 376 ± 8 kg, and cattalo 353 ±5 kg. At a constant 24-h cold carcass weight, cattalo exceeded Hereford in carcass length (2.3%). Breed groups did not differ in mean fat thickness over, or area of, the longissimus dorsi, dressing percent, or transit shrink. At a constant carcass weight, the weight of the loin section was similar in all breed groups, but Hereford exceeded cattalo in round weight (2.6%), cattalo surpassed 1/4 Brahman in rib weight (4.3%), and 1/4 Brahman exceeded Hereford in shoulder weight (3.2%). Bison and cattalo were reported to have heavier front than rear quarters. This study suggests that the cattalo were not heavier in the shoulder but were lighter in the round than the Hereford and that the difference basically was in the weight of the hind shank.

Lamb production from diverse genotypes. 2. Carcass characteristics

2000 ◽  
Vol 70 (1) ◽  
pp. 147-156 ◽  
Author(s):  
N. M. Fogarty ◽  
D. L. Hopkins ◽  
R. van de Ven
Keyword(s):  
Meat Quality ◽  
Carcass Characteristics ◽  
Critical Value ◽  
Quality Characteristics ◽  
The Other ◽  
Carcass Weight ◽  
Genotype Effect ◽  
Meat Colour ◽  
Selection Of

AbstractCarcass and meat quality characteristics for 2408 cryptorchid and female lambs at mean carcass weights of 24·8 kg and 19·3 kg respectively are reported. The lambs were sired by a selection of Poll Dorset (D; no. = 7), Texel (T; no. = 10), Border Leicester (BL; no. =12) and Merino (M; no. =12) rams and born to Border Leicester × Merino (BLM) and Merino (M) dams. The lambs comprised six genotypes (D×BLM, T×BLM, D×M, T×M, BL×M and M×M) that represent the range of types (second cross, first cross and Merino) produced in the Australian lamb industry. The second cross (D×BLM, T×BLM) and first cross BL×M were fatter than first cross (D×M, T×M) (1 mm at the GR site) and M×M (3 mm GR) carcasses at the same hot carcass weight (P < 0·01). D cross were leaner than T cross for 24 kg cryptorchid carcasses at the С site (P < 0·01) but there was no difference at the GR site or f or 19 kg female carcasses at either site. There was no difference in M. longissimus thoracis et lumborum (LL) area of first cross and second cross carcasses sired by D and T rams, which were proportionately 0·04 greater than M×M and 0·09 greater than BL×M. The LL area was proportionately 0·04 greater for T than D crosses (P < 0·01). M×M had 0·02 lower dressing yield than other crosses (P < 0·01).There was a significant genotype effect for LL ultimate pH (P < 0·01). BL×M and M×M had higher mean pH and more carcasses than the other genotypes with pH greater than the critical value of 5·8 for meat quality. There were no significant differences between the genotypes for chromameter measures of meat colour. Implications for the production and processing sectors of the lamb industry are discussed.

GROWTH AND CARCASS TRAITS OF CATTALO, HEREFORD, AND 1/4-BRAHMAN BULL CALVES

1976 ◽  
Vol 56 (2) ◽  
pp. 193-199 ◽  
Author(s):  
J. E. LAWSON ◽  
H. F. PETERS
Keyword(s):  
Shear Test ◽  
Average Daily Gain ◽  
Carcass Traits ◽  
The Other ◽  
Total Weight ◽  
Carcass Weight ◽  
Longissimus Dorsi ◽  
Bull Calves ◽  
Fat Thickness ◽  
Daily Gain

The 1/4-Brahman bull calves exceeded those of the cattalo and Hereford by 19.6 and 14.8% in weaning weight. However, the Hereford surpassed the 1/4-Brahman and the cattalo by 11.1 and 14.9% in feedlot average daily gain. Cattalo (cattle × bison species cross) bulls weighed 17.7 and 12.0% less than 1/4-Brahman and Hereford bulls just before slaughter at an average age of 425 days. Similar differences were apparent for cold carcass weight. When age-of-dam and age-at-slaughter were covariate factors, area of the longissimus dorsi from 1/4-Brahman calves was larger by 13.5 and 8.7% than those from cattalo and Hereford. Fat thickness over the 1. dorsi did not differ among groups. Carcass weight and age at slaughter were covariates for the weights of meat cuts. Weights of loin, round, or plate cuts did not differ among groups. However, the rib cut from the 1/4-Brahman was lighter than that from the cattalo and Hereford, and the chuck cut was heavier. The Hereford exceeded the 1/4-Brahman in total weight of the more expensive rib–loin–round cuts. Warner-Bratzler shear estimates of tenderness did not differ among groups. Average fat thickness over the 1. dorsi was not significantly correlated to any of the means of the shear test on raw or broiled samples. In general, 1/4-Brahman and Hereford groups each exhibited superiority over the other two groups for several traits, while cattalo bulls did not exceed the other two groups in any of the traits considered in this study.

The effect of length of journey by road to abattoir, resting and feeding before slaughter on carcass characteristics in bacon weight pigs

1970 ◽  
Vol 12 (1) ◽  
pp. 37-46 ◽  
Author(s):  
A. Cuthbertson ◽  
R. W. Pomeroy
Keyword(s):  
Ph Value ◽  
Carcass Characteristics ◽  
Live Weight ◽  
The Other ◽  
Carcass Weight ◽  
Eye Muscle ◽  
Fat Thickness ◽  
Loading And Unloading

SUMMARYThree trials were conducted to investigate the effect of length of journey by road to the abattoir, resting and feeding before slaughter on carcass characteristics of pigs of about 200 lb live weight.Trial 1 investigated feeding or no feeding on the morning of slaughter, followed by a ½-hr or 8-hr journey by lorry to the abattoir with all pigs ending their journey and being killed at the same time. Ninety-six pigs were divided equally among the four treatments and the trial was repeated with a further 108 pigs. Measurements recorded on the live pigs and their carcasses included the live weight before the imposition of treatments, weight of liver, carcass and matured sides and the composition of a sample joint. Trial 2 studied lairaging overnight with food and water after a ½-hr or 8-hr journey to the abattoir compared with these journey lengths on the morning of slaughter. Eighty pigs were divided equally among the four treatments. Similar measurements to those in trial 1 were recorded. Trial 3 involved 49 pigs applied to each of three treatments, or 7-hr journey on the day of slaughter, with all pigs finishing their journey and being slaughtered at the same time.In trial 1, pigs which travelled for 8 hr before slaughter had carcasses averaging 0·9% less than those which travelled for ½ hr, regardless of whether or not they were fed. It could not be established where this loss occurred. Liver weights were greater for those pigs which were fed and was greatest for those pigs which were fed and had the ½-hr journey. Streak thickness was found to be decreased by feeding, but was not affected by the length of the journey. No effects of the treatments were found on pH or eye-muscle colour, but the ultimate pH of the pigs fed before the 8-hr journey was lower than for the other treatments. Trial 2 pigs showed no effect of the treatments on carcass weights. Liver weights were similar on all treatments except for the treatment involving 8-hr journey followed by lairage where the liver was about 220 g (16%) heavier. The ultimate pH value was lowest among pigs which travelled 8 hr on the morning of slaughter but was similar for pigs on the other treatments. In trial 3, loss of live weight tended to increase with increasing journey length. Pigs on the 7-hr journey treatment had about 90 g (6%) more liver than those on the shorter journeys. pH1 values increased with length of journey and the longer the journey the thinner tended to be the maximum shoulder fat thickness.From the differences in the results from the three trials, notably with carcass weight, it may be inferred that the behaviour and handling of pigs during the journey and during loading and unloading, may play an important part in determining the result of the length of the journey, resting and feeding. Further work is considered necessary to study such factors.

scholarly journals Slaughter and carcass characteristics of Gokceada, Maltese and Turkish Saanen suckling kids

2010 ◽  
Vol 53 (3) ◽  
pp. 318-327 ◽  
Author(s):  
M. Özcan ◽  
A. Yilmaz ◽  
B. Ekiz ◽  
C. Tölü ◽  
T. Savaş
Keyword(s):  
Body Weight ◽  
Carcass Characteristics ◽  
Carcass Weight ◽  
Dairy Goat ◽  
Longissimus Dorsi ◽  
Meat Production ◽  
Slaughter Weight ◽  
Section Area ◽  
Fat Thickness ◽  
Age And Sex

Abstract. Aim of the study was to investigate comparatively the slaughter and carcass characteristics of Gokceada, Maltese and Turkish Saanen suckling kids. Eight suckling male kids at 80–90 days of age from each genotype were used in the study. The kids were collected from dairy goat farms and slaughtered after lairage of an overnight period. Although the kids were at similar age and sex, the slaughter weight and chilled carcass weight of indigenous Gokceada kids were lower than those of Maltese and Turkish Saanen kids (P<0.001). Chilled dressing percentage calculated according to empty body weight was 48.97 % in Gokceada, 51.32 % in Maltese and 52.35 % in Turkish Saanen kids (P<0.001). There were not statistically significant differences among the breeds in terms of neck, shoulder, ribs and long leg percentages, musculus longissimus dorsi (MLD) section area and back fat thickness (P>0.05). While there were significant differences between breeds in terms of muscle, bone and fat weights in half carcass on the side of Turkish Saanen and Maltese kids, the differences between the genotypes were not significant for percentages of muscle, bone and fat. The carcass structure of suckling kids was small and meat production was low, however, they had very little fat in the carcass. It was concluded that Maltese and Turkish Saanen kids were favourable than Gokceada kids in terms of suckling kid meat production.

Effects of growth path, sire type, calving time and sex on growth and carcass characteristics of beef cattle in the agricultural area of Western Australia

2009 ◽  
Vol 49 (6) ◽  
pp. 504 ◽  
Author(s):  
B. L. McIntyre ◽  
G. D. Tudor ◽  
D. Read ◽  
W. Smart ◽  
T. J. Della Bosca ◽  
...  
Keyword(s):  
Slow Growth ◽  
Carcass Characteristics ◽  
Fast Growth ◽  
Carcass Weight ◽  
Breeding Value ◽  
Growth Path ◽  
High Quality ◽  
Fat Thickness ◽  
Estimated Breeding Value ◽  
The Imf

Growth, carcass characteristics and meat quality of the steer and heifer progeny of autumn (AC: March–April) and winter (WC: June–July) calving cows following weaning in January in each of 3 years (2003–05) were measured. The cows were mated to sires with a high estimated breeding value for either retail beef yield (RBY), intramuscular fat (IMF) or both RBY and IMF. After weaning, the progeny entered one of three growth paths until slaughter at an average steer liveweight of 500 kg: (i) fast – fast growth from weaning on a high concentrate feedlot diet; (ii) slow – slow growth from weaning (~0.6 kg/day) to 400 kg liveweight followed by growth at over 1 kg/day on high quality pasture; or (iii) comp. – 10% weaning weight loss, immediately after weaning followed by compensatory or rapid growth of over 1 kg/day on high quality pasture. Steers on the fast growth path had higher (P < 0.001) P8 fat thickness than those on the slow or comp. growth paths whereas heifers on the fast growth path only had higher (P < 0.001) P8 fat thickness than those on the slow growth path. Animals on the fast growth treatment had higher (P < 0.001) levels of IMF% than the slow animals which were higher (P < 0.001) than the comp. growth treatment. AUS-MEAT and US marbling scores were not different among growth paths. Animals finished on the fast growth path had a lower (P < 0.001) RBY% than those on either the slow or comp. growth paths. The RBY-sired progeny had higher (P < 0.001) finishing liveweight and hot standard carcass weight than either RBY and IMF or IMF-sired animals. IMF-sired progeny had higher (P < 0.01) rib fat thickness than either RBY or RBY- and IMF-sired animals. There was also a similar trend for P8 fat thickness but the effects were not significant. The RBY-sired animals had lower AUS-MEAT marbling scores (P < 0.01), US marbling scores (P < 0.001) and levels of IMF% (P < 0.01) than either of the other two sire treatments. RBY-sired animals also had higher (P < 0.001) estimated RBY% than those from the IMF sires while those by RBY and IMF sires were intermediate and not significantly different from either. Calving time had little influence on most carcass characteristics. However, WC animals tended to be fatter and have higher marbling scores than AC animals. The IMF% was higher (P < 0.01) in WC animals from RBY and IMF sires than in the corresponding AC animals. Heifers had lighter slaughter liveweight, carcass weight, were fatter and had higher marbling scores than steers. Heifers also had lower (P < 0.001) RBY% than the steers. Ossification scores for heifers were higher (P < 0.001) than for steers by ~30 units in AC calves and by 20 units in WC calves. The results of this experiment confirm the effectiveness of using sires with high estimated breeding value for the required characteristics in producing the desired improvements in the progeny. The absence of any interactions of sire type with growth path indicates that differences between sire types will be similar regardless of environmental conditions. Animals raised on a faster growth path after weaning produce carcasses with more fat and more IMF% than those grown on slower growth paths.

Growth and carcass characteristics of ram, cryptorchid and wether Border Leicester x Merino lambs: effects of increasing carcass weight.

1986 ◽  
Vol 26 (2) ◽  
pp. 153 ◽  
Author(s):  
GJ Lee
Keyword(s):  
Growth Rate ◽  
Carcass Characteristics ◽  
The Other ◽  
Carcass Weight ◽  
Consumer Acceptability ◽  
Cross Border ◽  
Ad Libitum ◽  
Dressing Percentage ◽  
Fat Score ◽  
Score Distributions

The growth and carcass characteristics of first-cross Border Leicester x Merino ram, cryptorchid and wether lambs were compared over a range of slaughter weights (35-55 kg). Lambs were offered feed ad libitum after weaning. The growth rate of wether lambs (221 g/day) was less (P< 0.01) than that of rams and cryptorchids (308 and 280 g/day respectively, P = 0.076). The dressed carcasses of the wether lambs were approximately 2 percentage units heavier than those of the ram and cryptorchids, but this difference was partly due to the weight of the testes. Across all sex groups, dressing percentage increased by 0.46 percentage units per kg increase in carcass weight. The carcasses of rams and cryptorchid lambs tended to be leaner than those of wethers. Fat score distributions, based on export standards, were such that wethers scored higher (fatter) than rams and cryptorchids (P< 0.05). There was a significant sexx carcass weight interaction with GR tissue depths. Above 17 kg carcass weight, tissue depth of wether lambs was greater than those of the other sex types. Of 12 families assessing consumer acceptability (taste, smell, size, fatness and tenderness) of leg roasts, the majority showed no preference for any of the sexes.

Bromocriptine-induced reduction of body fat in pigs

1990 ◽  
Vol 68 (4) ◽  
pp. 931-936 ◽  
Author(s):  
L. L. Southern ◽  
A. H. Cincotta ◽  
A. H. Meier ◽  
T. D. Bidner ◽  
K. L. Watkins
Keyword(s):  
Feed Intake ◽  
Feed Efficiency ◽  
Carcass Characteristics ◽  
Feed Utilization ◽  
Finishing Pigs ◽  
Initial Weight ◽  
Intact Female ◽  
Urea Nitrogen ◽  
Plasma Urea ◽  
Fat Thickness

Abstract An experiment was conducted with 36 crossbred finishing pigs (18 male castrates and 18 females) to evaluate the effect of bromocriptine implants on growth, feed intake, feed efficiency, plasma urea nitrogen (PUN) and carcass characteristics. Three levels of bromocriptine (0, 5 and 10 mg/[pig·d]) were administered, via implants at the base of the ear, to six (two replicates of three) male castrates or to six (two replicates of three) intact female pigs (2 × 3 factorial arrangement of treatments). Average initial weight of pigs at the time of implantation was 89.7 kg, and the implants remained in the pigs for 28 (replicate 1) or 30 (replicate 2) d prior to slaughter. Gain, feed intake and efficiency of feed utilization were not affected (P > .10) by bromocriptine. Plasma urea nitrogen was lower in female pigs administered 10 mg bromocriptine; bromocriptine did not affect PUN of male pigs (gender × bromocriptine, P < .08). Tenth rib fat thickness and average backfat thickness were lower (P < .06) and percentage of muscling was higher (P < .06) in pigs implanted with bromocriptine. Female pigs had less 10th rib fat but larger loin eye areas and a greater percentage of muscling than male pigs.

scholarly journals 227 Evaluation of reimplant timing with Revalor-200 on steer performance and carcass characteristics

2019 ◽  
Vol 97 (Supplement_2) ◽  
pp. 127-128
Author(s):  
Caitlin A Coulson ◽  
Bradley M Boyd ◽  
Henry Hilscher ◽  
Brandon L Nuttelman ◽  
Grant I Crawford ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Carcass Characteristics ◽  
The Other ◽  
Carcass Weight ◽  
Dry Matter Intake ◽  
Optimal Time ◽  
Trenbolone Acetate ◽  
First Derivative ◽  
Randomized Block Design

Abstract The objective of this study was to evaluate the optimal time to reimplant following an initial implant on performance and carcass characteristics when steers were fed for 180 d. Crossbred steers (n = 800; initial BW = 330 ± 25 kg) were utilized in a generalized randomized block design and assigned randomly to pen, and pen assigned randomly to one of five treatments. Treatments included 5 different days on terminal (DOT) implant (160, 120, 100, 80 or 40 DOT). All steers were given an initial implant (80 mg trenbolone acetate (TBA) + 16 mg estradiol; Revalor-IS) on d 1. Terminal implant consisted of 200 mg TBA + 20 mg estradiol (Revalor-200). Dry matter intake was the least for 40 DOT (P ≤ 0.04), with no differences between the other treatments (P ≥ 0.11). Carcass-adjusted final BW responded quadratically (P = 0.03) with 100 DOT having the greatest final BW but was not different from 120 DOT (P = 0.82). Carcass-adjusted ADG and G:F responded quadratically (P = 0.02 and P < 0.01, respectively). When solved for the first derivative, carcass-adjusted ADG and G:F were maximized at 99 and 87 DOT, respectively. However, there was less than a 2% difference in carcass-adjusted ADG and G:F between 80 and 120 DOT. Hot carcass weight responded quadratically (P = 0.03), with the greatest HCW at 100 DOT. Solving for the first derivative, HCW was optimized at 104 DOT. There were no differences in back fat, marbling, or yield grade (P ≥ 0.27). Overall, administering an initial implant followed by a terminal implant 85 to 105 d prior to harvest increased gain, efficiency, and HCW in steers when fed for 180 d. Minimal changes in performance and carcass characteristics when steers are reimplanted 80 to 120 d prior to harvest suggests flexibility in reimplanting windows.

Sign in / Sign up

Export Citation Format

Share Document