scholarly journals Hydrazinolyzed cellulose-g-polymethyl acrylate as adsorbent for efficient removal of Cd(II) and Pb(II) ions from aqueous solution

2016 ◽  
Vol 75 (5) ◽  
pp. 1051-1058 ◽  
Author(s):  
Qiujin Jia ◽  
Wanting Zhang ◽  
Dongping Li ◽  
Yulong Liu ◽  
Yuju Che ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Physical Adsorption ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Initial Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Efficient Adsorbent

Hydrazinolyzed cellulose-graft-polymethyl acrylate (Cell-g-PMA-HZ), an efficient adsorbent for removal of Cd(II) and Pb(II) from aqueous solution, has been prepared by ceric salt-initiated graft polymerization of methyl acrylate from microcrystalline cellulose surface and subsequent hydrazinolysis. The influences of initial pH, contact time, and temperature on adsorption capacity of Cell-g-PMA-HZ as well as adsorption equilibrium, kinetic and thermodynamic properties were examined in detail. As for Cd(II) adsorption, kinetic adsorption can be explained by pseudo-second-order, while adsorption isotherm fits well with Langmuir isotherm model, from which maximum equilibrium adsorption capacity can be derived as 235.85 mg g−1 at 28 °C. Further thermodynamic investigation indicated that adsorption of Cd(II) by adsorbent Cell-g-PMA-HZ is endothermic and spontaneous under studied conditions. On the other hand, isotherm of Pb(II) adsorption fits well with Freundlich isotherm model and is more likely to be a physical-adsorption-dominated process. Consecutive adsorption–desorption experiments showed that Cell-g-PMA-HZ is reusable with satisfactory adsorption capacity.

scholarly journals Preparation of ureido-functionalized PVA/silica mesoporous fibre membranes via electrospinning for adsorption of Pb2+ and Cu2+ in wastewater

2017 ◽  
Vol 76 (9) ◽  
pp. 2526-2534 ◽  
Author(s):  
Meimei Zhou ◽  
Weizhen Tang ◽  
Pingping Luo ◽  
Jiqiang Lyu ◽  
Aixia Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption

Abstract Ureido-functionalized mesoporous polyvinyl alcohol/silica composite nanofibre membranes were prepared by electrospinning technology and their application for removal of Pb2+ and Cu2+ from wastewater was discussed. The characteristics of the membranes were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption analysis. Results show that the membranes have long fibrous shapes and worm-like mesoporous micromorphologies. Fourier transform infrared spectroscopy confirmed the membranes were successfully functionalized with ureido groups. Pb2+ and Cu2+ adsorption behavior on the membranes followed a pseudo-second-order nonlinear kinetic model with approximately 30 minutes to equilibrium. Pb2+ adsorption was modelled using a Langmuir isotherm model with maximum adsorption capacity of 26.96 mg g−1. However, Cu2+ adsorption was well described by a Freundlich isotherm model with poor adsorption potential due to the tendency to form chelating complexes with several ureido groups. Notably, the membranes were easily regenerated through acid treatment, and maintained adsorption capacity of 91.87% after five regeneration cycles, showing potential for applications in controlling heavy metals-related pollution and metals reuse.

scholarly journals Modification of Styrofoam Waste as a Low-Cost Adsorbent for Removal of Cadmium Ion in Aqueous Solution

2018 ◽  
Vol 3 (2) ◽  
pp. 127-142 ◽  
Author(s):  
Ismi M. N. Milla ◽  
Mia A. Syahri ◽  
Endang T. Wahyuni ◽  
Roto Roto ◽  
Dwi Siswanta
Keyword(s):  
Aqueous Solution ◽  
Sulfuric Acid ◽  
Low Cost ◽  
Diffusion Mechanism ◽  
Sulfuric Acid Concentration ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Cadmium Ion ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

waste has been modified by sulfonation using sulfuric acid to form its corresponding sulfonated adsorbent and was further used for removing cadmium ion in its aqueous solution. The effect of the styrofoam weight, sulfuric acid concentration, temperature and time on the sulfonation result was evaluated. The prepared adsorbent was characterized by XRD, FTIR, and SEM. The cadmium ion adsorption was conducted by batch technique, where the kinetic parameters were determined. The research results attribute that the sulfonated styrofoam has been successfully prepared, and the highest sulfonation is exhibited by using 18M of the sulfuric acid, at 60 oC for 6 h with 5 g of styrofoam. The cadmium adsorption by the sulfonated styrofoam fits with the pseudo-second-order and the Langmuir isotherm model, while the native styrofoam follows the intraparticle diffusion mechanism and Freundlich isotherm model. The adsorption capacities of the sulfonated and the native styrofoam are 51.6 mg/g and 7.09 mg/g respectively, and their respective adsorption rate are 8.20 10-3 mg. g-1. min-1 and 26.9 10-3 mg.g-1 min-1/2 .

scholarly journals Effect of Modified Eggshell on Adsorption Capacity of Chromium(VI) from Aqueous Solution

2020 ◽  
Vol 32 (7) ◽  
pp. 1549-1556
Author(s):  
Abdulaziz Ali Alomari
Keyword(s):  
Aqueous Solution ◽  
Thermal Treatment ◽  
Adsorption Capacity ◽  
Rhombohedral Structure ◽  
Chromium Vi ◽  
Protein Fibers ◽  
Residual Protein ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Static Conditions

The aim of this work is to investigate the use of eggshell for adsorption of Cr(VI) from aqueous solution and the effect of thermal treatment as well as coating with Fe2O3 of eggshell on the extraction percent of Cr(VI). The XRD, FTIR and SEM techniques proved that the eggshell mainly composed of calcite rhombohedral structure in addition to a trace of quartz silica residual protein fibers. Heating at 550 ºC does not decompose eggshell but decomposes the residual protein. The effect of pH, weight of eggshell adsorbent, contact time, and initial concentration of Cr(VI) ions on the adsorption of Cr(VI) on eggshell sorbents were determined under static conditions by the batch equilibrium technique. The sorption kinetic as well as mechanistic isotherm parameters of Cr(VI) on the eggshell sorbent, were analyzed. It was concluded that the adsorption of Cr(VI) on eggshell increases as pH increases in the range 3-7, then, with decreases at higher pH. The extraction percent of Cr(VI) increases with an increase in the dosage of eggshell sorbents. The optimum dosage of eggshell adsorbents was found to be 5 g after which the extraction percent of Cr(VI) did not marked increase. The extraction percent of Cr(VI) by eggshell sorbents rapidly increases within 60 min followed by a slower extraction after that when maximum adsorption was reported. The adsorption capacity of Cr(VI) ions is slightly reduced in case of heated eggshell due to the change that occurs in the pore size distribution and structure of eggshell during heating. Hence, the thermal treatment and coating with Fe2O3 do not affect the chemical structure of eggshell sorbents. The adsorption kinetics data were best fitted with the pseudo-second-order equation and the adsorption isotherms were best fitted with the Langmuir isotherm model.

scholarly journals Adsorption of Lead (II) from Aqueous Solution with High Efficiency by Hydrothermal Biochar Derived from Honey

2020 ◽  
Vol 17 (10) ◽  
pp. 3441 ◽  
Author(s):  
Bo Wang ◽  
Jie Yu ◽  
Hui Liao ◽  
Wenkun Zhu ◽  
Pingping Ding ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
High Efficiency ◽  
Raw Material ◽  
Before And After ◽  
Initial Ph ◽  
Carboxylic Groups ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Natural Honey

A novel natural honey hydrothermal biochar (HHTB) was prepared using natural honey as raw material. The as-prepared adsorbent was applied to adsorb Pb2+ from aqueous solution and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy to investigate the structure and morphology change of the adsorbent before and after Pb2+ adsorption. The influence of the pH, initial Pb2+ concentration, temperature, and contact time on the adsorption of Pb2+ was systematically investigated. The results revealed that the adsorption capacity for Pb2+ is up to 133.2 mg·g−1 at initial pH of 5.0 and adsorption temperature of 298 K. Meanwhile, the adsorption of Pb2+ on HHTB can be well fitted by the pseudo-second-order model and Langmuir isotherm model. The adsorbent had great selectivity for Pb2+ from the aqueous solution containing coexisting ions including Cd2+, Co2+, Cr3+, Cu2+, Ni2+ and Zn2+. Furthermore, the adsorption of Pb2+ on HHTB was attributed to complexation coordination, where it involved hydroxyl and carboxylic groups on HHTB in the process of adsorption of Pb2+.

scholarly journals Recovery of phosphate from aqueous solution by magnetically recycled modified polishing powder composites

2019 ◽  
Vol 80 (7) ◽  
pp. 1357-1366
Author(s):  
Jianming Liu ◽  
Runying Bai ◽  
Junfeng Hao ◽  
Bowen Song ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Ligand Exchange ◽  
Adsorption Process ◽  
High Adsorption ◽  
Order Model ◽  
Powder Composites ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ph Level ◽  
Adsorption Desorption

Abstract This study investigated a magnetically recycled modified polishing powder (CMIO@PP) as an adsorbent of phosphate; the CMIO@PP was synthesized by combining the modified La/Ce-containing waste polishing powder with CaO2-modified Fe3O4 (CMIO). Results indicate that the CMIO@PP nanocomposite presents a crystal structure comprising La (OH)3, Ce (OH)3, and Fe3O4, and that CMIO is uniformly dispersed in the modified polishing powder. The CMIO@PP (1:3) is a suitable choice considering its magnetism and adsorption capacity. The magnetic adsorbent exhibits a high adsorption capacity of 53.72 mg/g, a short equilibrium time of 60 min, and superior selectivity for phosphate. Moreover, the adsorbent strongly depends on the pH during the adsorption process and maintains a large adsorption capacity when the pH level is between 2 and 6. The adsorption of phosphate by the CMIO@PP (1:3) accords with the Langmuir isotherm model, and the adsorption process follows the pseudo-second order model. Meanwhile, adsorption–desorption experiments show that the adsorbent could be recycled a few times and that a high removal efficiency of phosphate from civil wastewater was achieved. Finally, mechanisms show that the adsorption of phosphate by the CMIO@PP (1:3) is mainly caused by electrostatic attraction and ligand exchange.

scholarly journals Efficient Separation of Heavy Metals by Magnetic Nanostructured Beads

Inorganics ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 40 ◽  
Author(s):  
Lisandra de Castro Alves ◽  
Susana Yáñez-Vilar ◽  
Yolanda Piñeiro-Redondo ◽  
José Rivas
Keyword(s):  
Heavy Metals ◽  
Ternary System ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Metal System ◽  
Adsorption Sites ◽  
Removal Of Heavy Metals ◽  
Adsorption Desorption ◽  
Efficient Adsorbent

This study reports the ability of magnetic alginate activated carbon (MAAC) beads to remove Cd(II), Hg(II), and Ni(II) from water in a mono-metal and ternary system. The adsorption capacity of the MAAC beads was highest in the mono-metal system. The removal efficiency of such metal ions falls in the range of 20–80% and it followed the order Cd(II) > Ni(II) > Hg(II). The model that best fitted in the ternary system was the Freundlich isotherm, while in the mono-system it was the Langmuir isotherm. The maximum Cd(II), Hg(II), and Ni(II) adsorption capacities calculated from the Freundlich isotherm in the mono-metal system were 7.09, 5.08, and 4.82 (mg/g) (mg/L)1/n, respectively. Lower adsorption capacity was observed in the ternary system due to the competition of metal ions for available adsorption sites. Desorption and reusability experiments demonstrated the MAAC beads could be used for at least five consecutive adsorption/desorption cycles. These findings suggest the practical use of the MAAC beads as efficient adsorbent for the removal of heavy metals from wastewater.

scholarly journals Adsorption of As(V) from Aqueous Solution on Chitosan-Modified Diatomite

2020 ◽  
Vol 17 (2) ◽  
pp. 429 ◽  
Author(s):  
Qintao Yang ◽  
Liang Gong ◽  
Lili Huang ◽  
Qinglin Xie ◽  
Yijian Zhong ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Ph Effect ◽  
Freundlich Isotherm ◽  
Xrd Analysis ◽  
Optimal Value ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Modified Diatomite

A novel chitosan (CS)-modified diatomite (Dt) was prepared by a simple mixture in the mass ratio to remove As(V) from aqueous solution in this research. The CS-modified Dt adsorbent was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD) analysis. The parameters to influence the adsorption of As(V) ion were studied under such conditions as kinetics, adsorption isotherm, and pH effect. The results revealed that adsorption of As(V) was initially rapid and the equilibrium time was reached after 40 min. The optimal value of the pH was 5.0 for better adsorption. The equilibrium data were well fitted to the Langmuir isotherm compared to the Freundlich isotherm, and exhibited the highest capacity and removal efficiency of 94.3% under an initial As(V) concentration of 5 mg/L. The kinetic data were well described by the pseudo-second-order model. In addition, 0.1 M NaOH has the best desorption efficiency of As(V) adsorbed on CS-modified Dt, and the removal efficiency of As(V) was still higher than 90% when after six adsorption-desorption cycles. These results showed that the CS-modified Dt could be considered as a potential adsorbent for the removal of As(V) in aqueous solution.

Study on Adsorption of U(VI) From Aqueous Solution by Activated MgO

2017 ◽  
Author(s):  
Qingqing Liu ◽  
Xiaoyan Li
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Batch System ◽  
15Mg Dose ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Kinetics Of

The activated MgO was synthesized by microwave homo-precipitator method and characterized by SEM, EDS and FT-IR methods. It was used to adsorption of U(VI) from aqueous solution with batch system. The paper discussed the effect of pH, temperature, contact time, adsorbent dose and initial U(VI) concentration on the adsorption. The results showed that activated MgO has good adsorption capacity for U(VI), the removal rate and equilibrium adsorption capacity reached 83.5% and 84.04mg·g−1 at pH 5.0, 15mg dose and 313K,respectively. The adsorption kinetics of U(VI) onto activated MgO were better fitted with pseudo-second-order kinetic.The adsorption isotherm data were fitted well to Freundlich isotherm model.The thermodynamic parameters showed that the adsorption process is endothermic and spontaneous.

scholarly journals Adsorption Of Cd(II) Ions From Aqueous Solution By A Low-Cost Biosorbent Prepared From Ipomea Pes-Caprae Stem

2020 ◽  
Vol 9 (3) ◽  
pp. 197-206
Author(s):  
Thaharah Ramadhani ◽  
Faisal Abdullah ◽  
Indra Indra ◽  
Abrar Muslim ◽  
Suhendrayatna Suhendrayatna ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Optimal Condition ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Low Cost ◽  
Ph Values ◽  
Monolayer Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

The use of a low-cost biosorbent prepared from Ipomoea pes-caprae stem for the adsorption of Cd(II) ions from aqueous solution at different contact times, biosorbent sizes, pH values, and initial Cd(II) ions concentration solution was investigated. The biosorbent was analyzed using Fourier-transform infrared spectroscopy (FT-IR) to find important IR-active functional groups. A scanning electron microscope (SEM) was used to examine the biosorbent morphology. The experimental results showed the highest Cd(II) ions adsorption was 29.513 mg/g  under an optimal condition as initial Cd(II) ions concentration of 662.77 mg/L, 1 g dose, 80-min contact time, pH 5, 75 rpm of stirring speed, 1 atm, and 30 oC. Cd(II) ions' adsorption kinetics obeys the linearized pseudo-second-order kinetics (R2 = 0.996), and the adsorption capacity is based on the optimal condition, and the rate attained was 44.444 mg/g and 0.097 g/mg. Min, respectively. Besides, the adsorption isotherms were very well fitted by the linearized Langmuir isotherm model, and the monolayer adsorption capacity and pore volume determined was 30.121 mg/g and 0.129 L/mg, respectively. These results indicated the chemisorption nature

The Adsorption Properties of Ciprofloxacin by KMnO4 Modified Durio zibethinus Murr Shells

2015 ◽  
Vol 1104 ◽  
pp. 111-117
Author(s):  
Wei Mei Shi ◽  
Ye Chun Ding ◽  
Long Huo Wu
Keyword(s):  
Linear Regression Analysis ◽  
Thermodynamic Characteristics ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Multilayer Adsorption ◽  
Durio Zibethinus ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Kinetics Of

Through the experiment of Ciprofloxacin (CIP) adsorption by KMnO4modifiedDurio zibethinusMurr Shell (KDS), the best condition, adsorption kinetics and thermodynamic characteristics were studied. The isotherm parameters were estimated by linear regression analysis with Langmuir isotherm model, Temkin isotherm and Freundlich isotherm model. The equilibrium process was described well by the Freundlich isotherm model, which indicated that the adsorption thermodynamics of CIP on KDS is a multilayer adsorption process．The kinetics of the interactions showed better agreement with the pseudo-second-order model (R2=0.9999). This study demonstrated that KDS could be used for the removal of CIP in water treatment.

Sign in / Sign up

Export Citation Format

Share Document