scholarly journals Optimization of coagulation-flocculation process in the treatment of surface water for a maximum dissolved organic matter removal using RSM approach

Author(s):  
Sami Khettaf ◽  
Imen Khounı ◽  
Ghofrane Louhichi ◽  
Ahmed Ghrabi ◽  
Latifa Bousselmi ◽  
...  

Abstract The aim of this research work is the optimization of the coagulation/flocculation process in the treatment of surface water for a maximum dissolved organic matter (DOM) removal using response surface methodology (RSM). For this purpose, several jar test experiments have been performed in order to identify the most influencing factors. Afterwards, RSM has been done to investigate the effects and the interactions of three chosen variables (coagulant concentration, flocculent concentration, and initial pH), whereas the responses were the DOM removal in terms of chemical oxygen demand (COD), in terms of absorbance at the wavelength 254 nm (UV-254), and the final pH. The optimal conditions were as follows: 133 mg/L of coagulant, 60 mg/L of flocculent and an initial pH equal to 6.91. Under these conditions, the efficiency removals were 56% in terms of COD and 59% in terms of UV-254 with a final pH equal to 6.78. High variance coefficient R2 values, with 0.96 for the removal in terms of COD and 0.92 in terms of UV-254 confirm the reliability and the validity of the obtained model.

2021 ◽  
Author(s):  
Miriam Appiah-Brempong ◽  
Helen Michelle Korkor Essandoh ◽  
Nana Yaw Asiedu ◽  
Samuel Kwame Dadzie ◽  
Francis Yao Momade

Abstract There is a dearth in knowledge on artisanal tannery wastewater treatment as most studies are focused on treatment of wastewater generated from modern-day leather manufacturing industries. The extensive use of plant materials in artisanal tanneries introduces high loads of polyphenolic compounds in the wastewater rendering biological treatment of the wastewater ineffective. This study, therefore, employed coagulation-flocculation process to pre-treat artisanal tannery wastewater with the aim of applying the central composite design, a statistical approach in Response Surface Methodology (RSM) to model and optimize the removal of Chemical Oxygen Demand (COD), Total Suspended Solids (TSS) and turbidity and to minimize Sludge Volume Index (SVI). Optimization process focused on the two most important influencing parameters: dosage of aluminium sulphate and initial pH of wastewater. Results revealed that optimal pH and aluminium sulphate dosage of 6.09 and 11.6g/L respectively could yield maximum removal efficiencies of 38.51% of COD, 76.05% of TSS and 79.64% of turbidity from the wastewater with a minimum SVI of 29.57mL/g. Further experiments conducted to validate these results showed a good agreement between the experimental and predicted results signifying the suitability of RSM for optimization of the coagulation treatment process. This is the first reported study on optimization of coagulation-flocculation treatment of artisanal tannery wastewater. Results of this study can be used practically for efficient pre-treatment of artisanal tannery wastewater.


2020 ◽  
Vol 6 (2) ◽  
pp. 0152-0163
Author(s):  
Efraim Lázaro Reis ◽  
Maria Paulina Mendonza Combatt ◽  
Karina Esther Vasquez Sanjuan ◽  
Antônio Augusto Neves ◽  
Regina Célia Santos Mendonça

The electrocoagulation for water clarification for purification have been studied as alternative to the processes of the water treatment. This study aimed to model and to optimize this process for types of water with different turbidity conditions; considering the current intensity, electrolysis time and initial pH on apparent color removal, chemical oxygen demand and surface water turbidity. Electrocoagulation tests were make aluminum electrodes. The optimal operating conditions and models based on the response surface methodology were obtained with central composite design. In order to comply with the esthetic / organoleptic standard stipulated for this stage of the process, the characterization of the three types of water studied must have color < 15 uH, COD < 18 mg L-1 O2 and turbidity < 5 NTU). The correlation between the analyzed answers allows finding specific conditions of the parameters, assisting in the determination of safe work points in the operation of clarification.


2021 ◽  
pp. 1-14
Author(s):  
Sami Khettaf ◽  
Roumaissa Boumaraf ◽  
Fatiha Benmahdi ◽  
Kamel-Eddine Bouhidel ◽  
Mohammed Bouhelassa

2018 ◽  
Vol 31 (2) ◽  
pp. 97-107
Author(s):  
Ahmed Hamdani ◽  
Mohammed Mountadar ◽  
Omar Assobhei

In order to study the simultaneous removal of nitrate and organic matter from a dairy effluent containing 670 mg∙L-1 of nitrate (NO3--N) and 5 760 mg∙L-1 of dissolved chemical oxygen demand (CODd), denitrification in a laboratory scale bioreactor consisting of an immersed bacterial bed colonized by an heterotrophic denitrifying flora (HDF) selected for NO3- reduction, COD consumption and adapted to grow on an effluent produced by a dairy industry was investigated. The obtained results indicated that at the optimal conditions of temperature (30°C), pH (7), COD/NO3--N ratio (5), the operation lasted 108h with total reduction of nitrate in 72h, no nitrite accumulation, and 92% of soluble COD removal in 96h. This indicates that the biodenitrification was accompanied with a high efficiency of matter organic removal as an electron donor, and thereby satisfies the applicable standards.


2019 ◽  
Vol 6 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Abdul Aziz Hamidi ◽  
Syed Zainal Sharifah Farah Fariza ◽  
Alazaiza Motasem Y.D

Landfill leachate is highly polluted and generated as a result of water infiltration through solid waste produced domestically and industrially. This study investigated the applicability of the response surface methodology (RSM) to optimize the removal performances of chemical oxygen demand (COD), color, and suspended solids (SS) from landfill leachate by coagulation process using Tin tetrachloride pentahydrate. The leachate samples were collected from Alor Pongsu Landfill (APLS) in Perak, Malaysia. Before starting the experiments, general characterization was carried out for raw leachate samples to investigate their physical and chemical properties. The effects of the dosage and pH of SnCl4 on the removal performances were evaluated as well. An ideal experimental design was performed based on the central composite design (CCD) by RSM. In addition, this RSM was used to evaluate the effects of process variables and their interaction toward the attainment of their optimum conditions. The statistical design of the experiments and data analysis was resolved using the Design-Expert software. Further, the range of coagulant dosage and pH was selected based on a batch study which was conducted at 13000 mg/L to 17000 mg/L of SnCl4 and pH ranged from 6 to 10. The results showed that the optimum pH and dosage of SnCl4 were 7.17 and 15 g/L, respectively, where the maximum removal efficiency was 67.7% for COD and 100% for color and SS. The results were in agreement with the experimental data with a maximum removal efficiency of 67.84 %, 98.6 %, and 99.3%, for COD, color, and SS, respectively. Overall, this study verified that the RSM method was viable for optimizing the operational condition of the coagulation-flocculation process.


2015 ◽  
Vol 12 (22) ◽  
pp. 6823-6836 ◽  
Author(s):  
Y. Zhang ◽  
H. Xie

Abstract. Rates and apparent quantum yields of photomineralization (AQYDOC) and photomethanification (AQYCH4) of chromophoric dissolved organic matter (CDOM) in Saguenay River surface water were determined at three widely differing dissolved oxygen concentrations ([O2]) (suboxic, air saturation, and oxygenated) using simulated-solar radiation. Photomineralization increased linearly with CDOM absorbance photobleaching for all three O2 treatments. Whereas the rate of photochemical dissolved organic carbon (DOC) loss increased with increasing [O2], the ratio of fractional DOC loss to fractional absorbance loss showed an inverse trend. CDOM photodegradation led to a higher degree of mineralization under suboxic conditions than under oxic conditions. AQYDOC determined under oxygenated, suboxic, and air-saturated conditions increased, decreased, and remained largely constant with photobleaching, respectively; AQYDOC obtained under air saturation with short-term irradiations could thus be applied to longer exposures. AQYDOC decreased successively from ultraviolet B (UVB) to ultraviolet A (UVA) to visible (VIS), which, alongside the solar irradiance spectrum, points to VIS and UVA being the primary drivers for photomineralization in the water column. The photomineralization rate in the Saguenay River was estimated to be 2.31 × 108 mol C yr−1, accounting for only 1 % of the annual DOC input into this system. Photoproduction of CH4 occurred under both suboxic and oxic conditions and increased with decreasing [O2], with the rate under suboxic conditions ~ 7–8 times that under oxic conditions. Photoproduction of CH4 under oxic conditions increased linearly with photomineralization and photobleaching. Under air saturation, 0.00057 % of the photochemical DOC loss was diverted to CH4, giving a photochemical CH4 production rate of 4.36 × 10−6 mol m−2 yr−1 in the Saguenay River and, by extrapolation, of (1.9–8.1) × 108 mol yr−1 in the global ocean. AQYCH4 changed little with photobleaching under air saturation but increased exponentially under suboxic conditions. Spectrally, AQYCH4 decreased sequentially from UVB to UVA to VIS, with UVB being more efficient under suboxic conditions than under oxic conditions. On a depth-integrated basis, VIS prevailed over UVB in controlling CH4 photoproduction under air saturation while the opposite held true under O2-deficiency. An addition of micromolar levels of dissolved dimethyl sulfide (DMS) substantially increased CH4 photoproduction, particularly under O2-deficiency; DMS at nanomolar ambient concentrations in surface oceans is, however, unlikely a significant CH4 precursor. Results from this study suggest that CDOM-based CH4 photoproduction only marginally contributes to the CH4 supersaturation in modern surface oceans and to both the modern and Archean atmospheric CH4 budgets, but that the photochemical term can be comparable to microbial CH4 oxidation in modern oxic oceans. Our results also suggest that anoxic microniches in particulate organic matter and phytoplankton cells containing elevated concentrations of precursors of the methyl radical such as DMS may provide potential hotspots for CH4 photoproduction.


2019 ◽  
Vol 5 (10) ◽  
pp. 1709-1722 ◽  
Author(s):  
Robin Wünsch ◽  
Julia Plattner ◽  
David Cayon ◽  
Fabienne Eugster ◽  
Jens Gebhardt ◽  
...  

UV/H2O2 treatment of sand-filtered surface water before soil aquifer treatment increases the total removal of organic micropollutants and has an impact on microbial activity without pronounced effects on dissolved organic matter removal.


Sign in / Sign up

Export Citation Format

Share Document