An Investigation of Thin Single-Crystal Silicon Films on Insulator/ Polycrystalline-Silicon Substrates

1973 ◽  
Author(s):  
Theodore I. Kamins
Keyword(s):  
Single Crystal ◽  
Polycrystalline Silicon ◽  
Single Crystal Silicon ◽  
Silicon Films ◽  
Silicon Substrates ◽  
Crystal Silicon

A Current Conduction Mechanism in Laser Recrystallized Silicon Metal-Oxide-Semiconductor Transistors

1983 ◽  
Vol 23 ◽  
Author(s):  
Han-Sheng Lee
Keyword(s):  
Conduction Mechanism ◽  
Single Crystal Silicon ◽  
Silicon Films ◽  
Oxide Semiconductor ◽  
Silicon Substrates ◽  
Mos Transistors ◽  
Crystal Silicon ◽  
Ion Laser ◽  
Argon Ion ◽  
A Current

ABSTRACTN-channel MOS transistors were fabricated on silicon films that had been recrystallized by an argon ion laser at different power levels. These transistors showed electrical characteristics similar, but somewhat inferior to those devices fabricated on single crystal silicon substrates. These differences are attributed to the presence of trapping states at the grain boundaries of the crystallites in the recrystallized silicon. A coulombic scattering model is presented to explain these differences. In the case of films annealed at low laser power, an additional factor of nonuniform trap state distribution is invoked to explain device characteristics. This model provides an adequate explanation for the observed transport properties of transistors fabricated from recrystallized silicon films.

Electrical Properties of Polycrystalline-Silicon Thin Films for VLSI

1986 ◽  
Vol 71 ◽  
Author(s):  
T I Kamins
Keyword(s):  
Electrical Properties ◽  
Integrated Circuits ◽  
Single Crystal ◽  
Grain Boundaries ◽  
Polycrystalline Silicon ◽  
Crystalline Silicon ◽  
Single Crystal Silicon ◽  
Active Regions ◽  
Crystal Silicon ◽  
Polysilicon Film

AbstractThe electrical properties of polycrystalline silicon differ from those of single-crystal silicon because of the effect of grain boundaries. At low and moderate dopant concentrations, dopant segregation to and carrier trapping at grain boundaries reduces the conductivity of polysilicon markedly compared to that of similarly doped single-crystal silicon. Because the properties of moderately doped polysilicon are limited by grain boundaries, modifying the carrier traps at the grain boundaries by introducing hydrogen to saturate dangling bonds improves the conductivity of polysilicon and allows fabrication of moderate-quality transistors with their active regions in the polycrystalline films. Removing the grain boundaries by melting and recrystallization allows fabrication of high-quality transistors. When polysilicon is used as an interconnecting layer in integrated circuits, its limited conductivity can degrade circuit performance. At high dopant concentrations, the active carrier concentration is limited by the solid solubility of the dopant species in crystalline silicon. The current through oxide grown on polysilicon can be markedly higher than that on oxide of similar thickness grown on singlecrystal silicon because the rough surface of a polysilicon film enhances the local electric field in oxide thermally grown on it. Consequently, the structure must be controlled to obtain reproducible conduction through the oxide. The differences in the behavior of polysilicon and single-crystal silicon and the limited electrical conductivity in polysilicon are having a greater impact on integrated circuits as the feature size decreases and the number of devices on a chip increases in the VLSI era.

Thermal conduction in doped single-crystal silicon films

2002 ◽  
Vol 91 (8) ◽  
pp. 5079-5088 ◽  
Author(s):  
M. Asheghi ◽  
K. Kurabayashi ◽  
R. Kasnavi ◽  
K. E. Goodson
Keyword(s):  
Single Crystal ◽  
Thermal Conduction ◽  
Single Crystal Silicon ◽  
Silicon Films ◽  
Crystal Silicon
Sign in / Sign up

Export Citation Format

Share Document