Fluid Properties and Particle Size Requirements for Effective Acid Fluid-Loss Control

1993 ◽  
Author(s):  
G.D. Gdanski
Keyword(s):  
Particle Size ◽  
Fluid Loss ◽  
Fluid Properties ◽  
Acid Fluid ◽  
Loss Control

Development of Polyglycolic- and Polylactic-Acid Fluid-Loss-Control Materials for Fracturing Fluids

2016 ◽  
Vol 30 (04) ◽  
pp. 295-309 ◽  
Author(s):  
Koichi Yoshimura ◽  
Hitoshi Matsui ◽  
Nobuo Morita
Keyword(s):  
Polylactic Acid ◽  
Fluid Loss ◽  
Fracturing Fluids ◽  
Acid Fluid ◽  
Loss Control

A Study on the Effects of Date Pit-Based Additive on the Performance of Water-Based Drilling Fluid

2017 ◽  
Vol 140 (5) ◽  
Author(s):  
Jimoh K. Adewole ◽  
Musa O. Najimu
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Date Seed ◽  
Water Based ◽  
Filtration Properties ◽  
Loss Control

This study investigates the effect of using date seed-based additive on the performance of water-based drilling fluids (WBDFs). Specifically, the effects of date pit (DP) fat content, particle size, and DP loading on the drilling fluids density, rheological properties, filtration properties, and thermal stability were investigated. The results showed that dispersion of particles less than 75 μm DP into the WBDFs enhanced the rheological as well as fluid loss control properties. Optimum fluid loss and filter cake thickness can be achieved by addition of 15–20 wt % DP loading to drilling fluid formulation.

A Comparative Study between p-Aminobenzensulfonate-Phenol-Formaldehyde Condensate and Sulfomethylated Phenolic Resin as Drilling Mud Fluid Loss Reducer

2014 ◽  
Vol 1081 ◽  
pp. 31-37
Author(s):  
Jin Peng Chai ◽  
Zheng Song Qiu
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Filter Cake ◽  
Phenolic Resin ◽  
Phenol Formaldehyde ◽  
Fluid Loss ◽  
Good Property ◽  
Test Results ◽  
Drilling Mud ◽  
Loss Control

The p-aminobenzensulfonate-phenol-formaldehyde (APF) condensate is synthesized and characterized by FTIR and TGA analyses. Its properties as drilling mud fluid loss reducer are studied with respect to fluid loss and particle size distribution. In addition, the effect of salt on properties of APF condensate was discussed. Test results show that the APF condensate not only possesses higher thermal stability than sulfomethylated phenolic resin (SMP), a commercial drilling mud additive, but also achieves good property of fluid loss control by reducing the permeability of filter cake; the fluid-loss controlling properties of APF condensate dropped with the increase of concentrations of NaCl.

Time Delayed and Low-Impairment Fluid-loss Control Using a Succinoglycan Biopolymer with an Internal Acid Breaker

SPE Journal ◽  
1997 ◽  
Vol 2 (04) ◽  
pp. 417-426 ◽  
Author(s):  
Marcel N. Bouts ◽  
A. Trompert Ruud ◽  
Alan J. Samuel
Keyword(s):  
Fluid Loss ◽  
Loss Control

scholarly journals Experimental analysis on rheological and fluid loss control of water-based mud using new additives

2018 ◽  
Vol 9 (3) ◽  
pp. 23-31 ◽  
Author(s):  
Misbah Biltayib Biltayib ◽  
Rashidi Masoud ◽  
Balhasan Saad ◽  
Alothman Reem ◽  
S. Kabuli Mufazzal
Keyword(s):  
Experimental Analysis ◽  
Fluid Loss ◽  
Water Based ◽  
Loss Control

Orthogonal Test Design for Optimization of Dispersive Type Cement Slurry Fluid Loss Control Additive Used in Petroleum Drilling

2011 ◽  
Vol 361-363 ◽  
pp. 487-492
Author(s):  
Sheng Lai Guo ◽  
Yu Huan Bu
Keyword(s):  
Ph Value ◽  
Orthogonal Experiment ◽  
Monomer Concentration ◽  
Ammonium Persulfate ◽  
Fluid Loss ◽  
Oil Well ◽  
Cement Slurry ◽  
Orthogonal Test Design ◽  
Total Monomer Concentration ◽  
Loss Control

The fluid loss control additive plays a key role in reducing reservoir damage and improving the cementing quality of an oil well. Aiming at good fluid loss control ability and excellent dispersibility, a new dispersive type fluid loss control additive was synthesized through orthogonal experiment with 2-acrylamido-2- methyl propane sulfonic acid, acrylamide, N, N-dimethylacrylamide and maleic anhydride. The orthogonal experiment result shows that the influence on the properties of FLCA decreases in the order: PH value > monomer concentration > monomer mole ratio > initiator concentration > temperature. The result indicates that the optimal conditions for FLCA were 4/2.5/2.5/1 of mole ratio of AMPS/AM /NNDMA/MA, 32.5% total monomer concentration in deionized water, 1.0% (by weight of monomer) ammonium persulfate/sodium bisulfite, 4 of PH value, 40°Cof temperature. The synthesized copolymer was identified by FTIR analysis. The results show the dispersive type fluid loss control additive has excellent dispersibility, fluid loss control ability, thermal resistant and salt tolerant ability. As the temperature increases, the thickening time of the slurry containing the synthesized additive reduces. The copolymer is expected to be a good fluid loss control additive.

scholarly journals Effect of carboxylic group on the compatibility with retarder and the retarding side effect of the fluid loss control additive used in oil well cement

2018 ◽  
Vol 5 (9) ◽  
pp. 180490 ◽  
Author(s):  
Shenglai Guo ◽  
Yao Lu ◽  
Yuhuan Bu ◽  
Benlin Li
Keyword(s):  
Carboxylic Acid ◽  
Side Effect ◽  
Great Influence ◽  
Acid Group ◽  
Field Application ◽  
Fluid Loss ◽  
Oil Well ◽  
Oil Well Cement ◽  
Well Cement ◽  
Loss Control

The retarding side effect and the compatibility with other additives are the main problems that limit the field application of the synthesized fluid loss control additive (FLCA). The effect of the type and content of carboxylic acid groups on the retarding side effect of FLCA and the compatibility between FLCA and the retarder AMPS-IA synthesized using 2-acrylamido-2-methyl propane sulfonic acid (AMPS) and itaconic acid (IA) was studied in this paper. The type and content of carboxylic acid group have a great influence on the fluid loss control ability, the compatibility with retarder and the retarding side effect of FLCA. FLCA containing IA or maleic acid (MA) shows better compatibility with retarder than FLCA containing acrylic acid, but the retarding side effect of FLCA containing MA is weaker than that of FLCA containing IA. Thus, MA is the most suitable monomer for synthesizing FLCA having good compatibility with retarder AMPS-IA.

Assessment of Lost Circulation Material Particle-Size Distribution on Fracture Sealing: A Numerical Study

2022 ◽  
pp. 1-15
Author(s):  
Lu Lee ◽  
Arash Dahi Taleghani
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Numerical Study ◽  
Fluid Loss ◽  
Material Particle ◽  
Lost Circulation ◽  
Fracture Sealing ◽  
Discrete Element Methods ◽  
Lost Circulation Materials

Summary Lost circulation materials (LCMs) are essential to combat fluid loss while drilling and may put the whole operation at risk if a proper LCM design is not used. The focus of this research is understanding the function of LCMs in sealing fractures to reduce fluid loss. One important consideration in the success of fracture sealing is the particle-size distribution (PSD) of LCMs. Various studies have suggested different guidelines for obtaining the best size distribution of LCMs for effective fracture sealing based on limited laboratory experiments or field observations. Hence, there is a need for sophisticated numerical methods to improve the LCM design by providing some predictive capabilities. In this study, computational fluid dynamics (CFD) and discrete element methods (DEM) numerical simulations are coupled to investigate the influence of PSD of granular LCMs on fracture sealing. Dimensionless variables were introduced to compare cases with different PSDs. We validated the CFD-DEM model in reproducing specific laboratory observations of fracture-sealing experiments within the model boundary parameters. Our simulations suggested that a bimodally distributed blend would be the most effective design in comparison to other PSDs tested here.

Sign in / Sign up

Export Citation Format

Share Document