A Study on the Effects of Date Pit-Based Additive on the Performance of Water-Based Drilling Fluid

2017 ◽  
Vol 140 (5) ◽  
Author(s):  
Jimoh K. Adewole ◽  
Musa O. Najimu
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Date Seed ◽  
Water Based ◽  
Filtration Properties ◽  
Loss Control

This study investigates the effect of using date seed-based additive on the performance of water-based drilling fluids (WBDFs). Specifically, the effects of date pit (DP) fat content, particle size, and DP loading on the drilling fluids density, rheological properties, filtration properties, and thermal stability were investigated. The results showed that dispersion of particles less than 75 μm DP into the WBDFs enhanced the rheological as well as fluid loss control properties. Optimum fluid loss and filter cake thickness can be achieved by addition of 15–20 wt % DP loading to drilling fluid formulation.

scholarly journals Synthesis of a Novel Filtrate Reducer and Its Application in Water-Based Drilling Fluid for Ultra-High-Temperature Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Dongyu Qiao ◽  
Zhongbin Ye ◽  
Lei Tang ◽  
Yiping Zheng ◽  
Xindong Wang ◽  
...  
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Adsorption Capacity ◽  
Fresh Water ◽  
Drilling Fluid ◽  
Salt Resistance ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Water Based ◽  
Water Base

The high-temperature stability and filtration property controlling of ultra-high-temperature water-based drilling fluids is a worldwide problem. To resolve this problem, a high-temperature-resistant quaternary copolymer (HTRTP) was synthesized based on molecular structure optimization design and monomer optimization. The physical and chemical properties were characterized by infrared spectroscopy, thermal weight, and spectrophotometry, and their temperature and salt resistance was evaluated in different drilling fluids, combined with adsorption, particle size analysis, and stability test. The results show that the thermal stability of HTRTP is very strong, and the initial temperature of thermal decomposition is above 320°C. The salt resistance of HTRTP is more than 162 g/L, and the calcium resistance is more than 5000 mg/L, which is equivalent to the foreign temperature-resistant polymer DCL-a, and is superior to the domestic metal ion viscosity increasing fluid loss agent PMHA-II for drilling fluids. It has excellent high-temperature resistance (245°C) and fluid loss reduction effect in fresh water base mud, fresh water weighted base mud, saturated brine base mud, and composite salt water base mud, which is better than foreign DCL-a (245°C) and domestic PMHA (220°C). The adsorption capacity of HTRTP on clay particles is large and firm, and the adsorption capacity changes little under the change of chemical environment and temperature. Both before and after HTRTP aging (245°C/16 h), the permeability of filter cake can be significantly reduced and its compressibility can be improved. By optimizing the particle size gradation of the drilling fluid and enhancing the colloid stability of the system, HTRTP can improve the filtration building capacity of the drilling fluid and reduce the filtration volume. The development of antithermal polymer provides a key treatment agent for the study of anti-high-temperature-resistant saline-based drilling fluid.

scholarly journals A Zwitterionic Copolymer as Rheology Modifier and Fluid Loss Agents for Water-Based Drilling Fluids

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3120
Author(s):  
Xianfeng Tan ◽  
Longchen Duan ◽  
Weichao Han ◽  
Ying Li ◽  
Mingyi Guo
Keyword(s):  
Zeta Potential ◽  
Negative Impact ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
High Concentration ◽  
Free Radical Copolymerization ◽  
Filtration Loss ◽  
Water Based ◽  
Filtration Properties

To overcome the negative impact on the rheological and filtration loss properties of drilling fluids caused by elevated temperature and salts contamination, which are common in ultradeep or geothermal drilling operations, it is imperative to develop highly efficient additives used in the water-based drilling fluid. In this study, a zwitterionic copolymer P (AM/DMC/AMPS/DMAM, ADAD) was synthesized by using acrylamide (AM), cationic monomer methacrylatoethyl trimethyl ammonium chloride (DMC), anionic monomer 2-acrylamide-2-methyl propane sulfonic acid (AMPS), and N,N-dimethylacrylamide (DMAM) through free radical copolymerization. The copolymer was characterized by 1H Nuclear Magnetic Resonance (NMR), Fourier transform infrared spectroscopy (FTIR), elemental analysis, thermogravimetric analysis (TGA), and zeta potential. The rheological behavior, filtration properties, and the performance exposure to salt or calcium contamination in water-based drilling fluid were investigated. The bentonite/polymer suspension showed improved rheological and filtration properties even after aging at 160 °C or a high concentration of salt and calcium. The filtration loss can be greatly reduced by more than 50% (from 18 mL to 7 mL) by the inclusion of 2.0 wt% copolymer, while a slight increase in the filtrate loss was observed even when exposed to electrolyte contamination. Particle size distribution and zeta potential further validate the idea that zwitterionic copolymer can greatly improve the stability of base fluid suspension through positive group enhanced anchoring on the clay surface and repulsion force between negative particles. Moreover, this study can be directed towards the design and application of zwitterionic copolymer in a water-based drilling fluid.

scholarly journals Improving the rheological and fluid loss properties of the water-based mud using wheat flour

2021 ◽  
Vol 11 (1) ◽  
pp. 137-145
Author(s):  
Hani Ali Al Khalaf ◽  
Zeeshan Ahmad ◽  
Gabriella Kovácsné Federer
Keyword(s):  
Yield Point ◽  
Wheat Flour ◽  
Apparent Viscosity ◽  
Loss Rate ◽  
Drilling Fluid ◽  
Filter Press ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Water Based ◽  
Filtration Properties

This study aims to evaluate the effect of wheat flour as a natural and environmentally friendly material on the properties of water-based mud. Recently, many experiments have been conducted with various additives to improve the properties of drilling fluids. The effect of using wheat flour as a new additive to drilling fluid was studied to improve rheological and filtration properties. In the laboratory several samples of water-based mud were prepared, different concentrations of wheat flour from 1 wt% to 7 wt% were added to the mud and tested by using a Fann 35 viscometer, 140 Fann Mud balance, and an API LT-LP filter press. The results showed that adding 7 wt% of wheat flour was the optimal concentration. It was found that the apparent viscosity and yield point increased by 50% and 35%, respectively, when 7 wt% of wheat flour was added to the water-based drilling fluid. Likewise, the fluid loss rate was reduced by 25% when using the same concentration of wheat flour.

A Comparative Study between p-Aminobenzensulfonate-Phenol-Formaldehyde Condensate and Sulfomethylated Phenolic Resin as Drilling Mud Fluid Loss Reducer

2014 ◽  
Vol 1081 ◽  
pp. 31-37
Author(s):  
Jin Peng Chai ◽  
Zheng Song Qiu
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Filter Cake ◽  
Phenolic Resin ◽  
Phenol Formaldehyde ◽  
Fluid Loss ◽  
Good Property ◽  
Test Results ◽  
Drilling Mud ◽  
Loss Control

The p-aminobenzensulfonate-phenol-formaldehyde (APF) condensate is synthesized and characterized by FTIR and TGA analyses. Its properties as drilling mud fluid loss reducer are studied with respect to fluid loss and particle size distribution. In addition, the effect of salt on properties of APF condensate was discussed. Test results show that the APF condensate not only possesses higher thermal stability than sulfomethylated phenolic resin (SMP), a commercial drilling mud additive, but also achieves good property of fluid loss control by reducing the permeability of filter cake; the fluid-loss controlling properties of APF condensate dropped with the increase of concentrations of NaCl.

Application of a Novel Ecofriendly Okra Powder as Fluid Loss Controller in Water Based Drilling Fluids

2021 ◽  
Author(s):  
Mobeen Murtaza ◽  
Zeeshan Tariq ◽  
Xianmin Zhou ◽  
Dhafer Al Sheri ◽  
Muhammad Mahmoud ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Saudi Arabia ◽  
Local Development ◽  
Drilling Fluid ◽  
Raw Material ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Gravimetric Analysis ◽  
Kingdom Of Saudi Arabia ◽  
Water Based

Abstract Saudi Arabian based companies are spending many millions of dollars a year on import of drilling mud additives to meet the drilling industry demand. To cut the imported materials, locally available materials are preferable. Out of many drilling fluid additives, a single locally available additive such as fluid loss can save millions of dollars a year. The cost and locally available raw material justify the development of drilling fluid additives in the Kingdom of Saudi Arabia. In other aspect, local development provides many benefits to the Kingdom including industrial growth, technology ownership and new job opportunities. Okra (Hibiscus esculents) is widely used as a thickener and viscosifier in medical and food industries due to its low cost, availability, longer shelf life, and high thermal tolerance. In addition to that, it is environment friendly and available in abundance locally in Kingdom of Saudi Arabia. The composition of Okra powder was diagnosed by X-ray fluorescence (XRF) and Fourier-transform infrared spectroscopy (FTIR). The thermal stability of Okra was tested using thermal gravimetric analysis (TGA). The Okra powder was mixed in various concentrations such as (1, 2 and 3) grams in 350ml of water based drilling fluid (WBDF). The performance of Okra contained drilling fluids was compared with starch-based drilling fluid. The addition of Okra reduced fluid loss in different proportions at different concentrations. For instance, drilling fluid with 3g Okra concentration had 42% lower fluid loss as compared to the base fluid. The cake thickness was reduced upon the addition of Okra. The low fluid loss and thin filter cake make Okra a useful solution as a fluid loss controller in WBDFs. The addition of Okra powder also increased the viscosity and gel strength of the WBDFs. TGA analysis of Okra powder showed that it has strong thermal stability as compared to starch. Overall, the experimental results suggest that Okra mixed drilling fluids can be used as an alternate solution to starch mixed drilling fluids.

Experimental Investigation of Aloe-Vera-Based CuO Nanofluid as a Novel Additive in Improving the Rheological and Filtration Properties of Water-Based Drilling Fluid

2021 ◽  
pp. 1-10
Author(s):  
Hameed Hussain Ahmed Mansoor ◽  
Srinivasa Reddy Devarapu ◽  
Robello Samuel ◽  
Tushar Sharma ◽  
Swaminathan Ponmani
Keyword(s):  
Thermal Stability ◽  
Hot Rolling ◽  
Drilling Fluid ◽  
Aloe Vera ◽  
Petroleum Engineering ◽  
Fluid Loss ◽  
Water Based ◽  
Drilling Operations ◽  
Filtration Properties ◽  
The Impact

Summary Drilling technology in petroleum engineering is associated with problems such as high fluid loss, poor hole cleaning, and pipe sticking. Improvement of rheological and filtration properties of water-based drilling fluids (WDFs) plays a major role in resolving these drilling problems. The application of nanotechnology to WDF in the recent past has attracted much attention in addressing these drilling operations problems. In the present work, we investigate the application of natural aloe vera and CuO nanofluids combined as an additive in WDF to address the drilling problems. The nanofluids of three different concentrations of CuO nanoparticle (0.2, 0.4 , and 0.6 wt%) with aloe vera as a base fluid are prepared for this study by adopting a two-step method. The prepared nanofluids are characterized by their particle size and morphological characteristics. Conventional WDF (DF.0) is synthesized, and the prepared aloe-vera-based CuO nanofluid is added to the WDF to prepare nanofluid-enhancedwater-based drilling fluid (NFWDF) of different concentrations of nanoparticles, namely, 0.2 , 0.4, and 0.6 wt%. The prepared drilling fluid mixture is then characterized for its rheological and filtrate loss properties at various temperatures. Thermal stability and aging studies are performed for both WDF and NFWDF. The experimental results are then modeled using rheological models. The results reveal that aloe-vera-based CuO nanofluids improve the thermal stability and rheological properties of drilling fluid and significantly decrease the American Petroleum Institute (API) filtrate. Viscosity for WDF shows an approximately 61.7% decrease in heating up to 90°C. Further, the hot roll aging test causes a 63% decrease in the viscosity of WDF at 90°C. However, the addition of aloe-vera-based CuO nanofluids is found to aid in recovering the viscosities to a great extent. The fluid loss values before hot rolling are observed to be 6.6 mL after 30 minutes, whereas fluid loss values for the NFWDFs are found to be 5.9, 5.4, and 4.6 mL, respectively. The fluid loss value after hot rolling for the WDF is found to be 10.8 mL after 30 minutes, whereas fluid loss values for the NFWDFs are found to be 9.2, 8.5, and 7.7 mL, respectively. The rheological performance data of NFWDF project a better fit with the Herschel-Bulkley model and suggest improvement in rheological and filtration properties. There has been limited research work available in understanding the impact of aloe-vera-gel-based nanofluids in improving the performance of WDFs through the improvement of its rheological and filtration properties. This study aims to exploit the property of native aloe vera and CuO nanofluids combined together to enhance the rheological and filtration properties of WDF by conducting the tests both before and after hot rolling conditions. This study acts as an important precursor for developing novel additives for WDF to improve its rheological and filtration properties. This study is also expected to benefit the industry and solve the major challenges in deep-well drilling operations and high-pressure and high-temperature (HPHT) drilling operations.

scholarly journals Experimental study on thermal, rheological and filtration control characteristics of drilling fluids: effect of nanoadditives

2020 ◽  
Vol 75 ◽  
pp. 36
Author(s):  
Erfan Veisi ◽  
Mastaneh Hajipour ◽  
Ebrahim Biniaz Delijani
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Drilling Fluid ◽  
Formation Damage ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Drill Bit ◽  
Rheological Characteristics ◽  
Cu Nanoparticles ◽  
Water Based

Cooling the drill bit is one of the major functions of drilling fluids, especially in high temperature deep drilling operations. Designing stable drilling fluids with proper thermal properties is a great challenge. Identifying appropriate additives for the drilling fluid can mitigate drill-bit erosion or deformation caused by induced thermal stress. The unique advantages of nanoparticles may enhance thermal characteristics of drilling fluids. The impacts of nanoparticles on the specific heat capacity, thermal conductivity, rheological, and filtration control characteristics of water‐based drilling fluids were experimentally investigated and compared in this study. Al2O3, CuO, and Cu nanoparticles were used to prepare the water-based drilling nanofluid samples with various concentrations, using the two-step method. Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) were utilized to study the nanoparticle samples. The nanofluids stability and particle size distribution were, furthermore, examined using Dynamic Light Scattering (DLS). The experimental results indicated that thermal and rheological characteristics are enhanced in the presence of nanoparticles. The best enhancement in drilling fluid heat capacity and thermal conductivity was obtained as 15.6% and 12%, respectively by adding 0.9 wt% Cu nanoparticles. Furthermore, significant improvement was observed in the rheological characteristics such as the apparent and plastic viscosities, yield point, and gel strength of the drilling nanofluids compared to the base drilling fluid. Addition of nanoparticles resulted in reduced fluid loss and formation damage. The permeability of filter cakes decreased with increasing the nanoparticles concentration, but no significant effect in filter cake thickness was observed. The results reveal that the application of nanoparticles may reduce drill-bit replacement costs by improving the thermal and drilling fluid rheological characteristics and decrease the formation damage due to mud filtrate invasion.

Rheology and fluid loss of a polyacrylamide-based micro-gel particles in a water-based drilling fluid

2020 ◽  
Vol 10 (5) ◽  
pp. 657-662
Author(s):  
Gang Wang ◽  
Honghai Fan ◽  
Guancheng Jiang ◽  
Wanjun Li ◽  
Yu Ye ◽  
...  
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Drilling Fluid ◽  
Crosslinking Agent ◽  
Fluid Loss ◽  
Temperature Property ◽  
Water Based ◽  
The Cross

In this paper, the cross-linked micro-gel polymer between acrylamide (AM) and N, N-Methylenebisacrylamide (MBA) was synthesized by dispersion polymerization. The initiator and crosslinking agent concentration were used to control the particle size of micro-gel polymer. The filtration property and mechanism of micro-gel were investigated comprehensively. The characteristics of micro-gel were checked by means of Fourier transform infrared spectroscopy, thermogravimetry, transmission electron microscopy, and particle size distribution, respectively. The results indicated that the cross-linked micro-gel polymer exhibited several outstanding merits, such as thermal stability (up to 200 °C), filtration control and rheological property. Microstructure analysis and particle size distribution examinations showed that the scale of micro-gel polymer was micro, which is in accord with design. Rheological tests demonstrated that the nonlinear structure of micro-gel polymer showed less impact on the apparent viscosity. The anti-high temperature property of micro-gel polymer was better than poly anioniccellulose (PAC) and asphalt widely applied in drilling fluid for anti-high temperature fluid-loss additive. As a result, the cross-linked micro-gel polymer had great potential to be applied in high temperature water-based mud.

Proposing a new biodegradable thinner and fluid loss control agent for water-based drilling fluid applications

2020 ◽  
Vol 17 (8) ◽  
pp. 3621-3632 ◽  
Author(s):  
A. T. Al-Hameedi ◽  
H. H. Alkinani ◽  
S. Dunn-Norman ◽  
M. M. Alkhamis ◽  
M. A. Al-Alwani ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Control Agent ◽  
Fluid Loss ◽  
Water Based ◽  
Loss Control
Sign in / Sign up

Export Citation Format

Share Document